ANFIER M6 Translator Earbuds User Manual
- June 13, 2024
- ANFIER
Table of Contents
Translator Earbuds
M6
USER MANUAL
Product Introduction
Turn ON/OFF
@ Take out both M earbuds and it will automatically turn on. During the boot process, you will hear voice: prompts such as *POWER ON’ PRIMARY/SECONDARY” and “YOU HEADSET IS CONNECTED”. When the earbuds place in the charging case, it will automatically turn off
- Take out both M6 earbuds
- Turn on Bluetooth, choose “WAS-M6” for pairing
If the earbuds have ever been paired vith your phone, it will automatically connect to the device when the earbuds are tuned on nettime.
Translations
- Search and download the “Was Trans” app in the App Store/ Google Play. You may also scan the QR code to download.
|
---|---
https://apps.apple.com/us/app/aivheadset/id1550055789| https://play.google.com/store/apps/details?id=com.wooask.wastrans - Open the app and allow the permissions for the proper use of the device.
- Turn on Bluetooth, choose “WAS-M6” for pairing. After the connection is successful, you may choose one of two different modes: Touch Mode and Speaker mode.
Touch Mode
Each person wears one earbud. (Suitable for a conversation with acquaintance
and share earbuds)
- Make sure that the Bluetooth of the mobile phone has been connected to WAS-M6;
- Give one of the earbuds to the other;
- Start the “Was Trans” app. When you hear a continuous beep, it means that the “Was Trans” app has been connected with WAS-M6;
- Choose the language of the left and right earbuds;
- Tap one side of the earbuds to speak continuously, and both earbuds can hear simultaneous interpretation. If the other side wants to speak, tap his or her earbud to start speaking. To end the translations, just touch the earbud again.Or set it to end translation automatically in the APP. (The default is to automatically end translation. If you want to end translation manually, please turn off “Automatic end pickup” in the Setting)
Speak out with phone’s speaker
Only one person wears earbud, the other communicate via the mobile phone. (Suitable for short conversation with strangers that are inconvenient to wear your earbud)
- Make sure that the Bluetooth of the mobile phone has been connected to WAS-M6;
- Start the “Was Trans” app. When you hear a continuous beep, it means that the “Was Trans” app has been connected with WAS-M6;
- Choose “Speaker Mode” from the menu;
- Choose the language of the earbuds and mobile phone;
- Tap the earbuds (or click the lower half of the phone screen) to start speaking, the mobile phone speaker will play the translations; Tap the top half of the phone screen, the other person starts speaking to the phone, and your earbud will hear the translations.
Common functions
Make phone calls
Answer: Tap the earbuds on the left or right side
Hang up: Tap the earbuds again on the left or right side
Reject: Tap 2 times on the left or right earbuds
Listen to music
Play/Pause: Tap the earbuds on the left or right side
Last: Tap 2 times on the left earbuds
Next: Tap 2 times on the right earbuds
Voice assistant (“Hey Siri or OK to Google”)
Start the voice service: Long touch the earbuds on the left or right side
Stop the voice service: Long touch the earbuds on the left or right side
again
LED Indications (Charging Case)
When the earbuds are charging, the indicator light of charging case display.
Red light on
Red light out
When charging, the indicator light of charging case display.
Green light slow flashing
Green light on
Press the button to check the battery capacity
Battery capacity less than 20% Red light flashes slowly for 5 times
Battery capacity more than 20% Green light on for 5 seconds
FAQ
Earbud (left or right) No audio?
- Check the battery of the earbuds. Putting the earbuds back into the charging box. Red light indicates that the earbuds need to be charged before using. Green light means they are fully charged. 2) If the battery power is sufficient, reset the earbuds by put them back into the charging case, close the case for 20 seconds then take earbuds out and reconnect to your mobile device.
Bluetooth not stable or can't find the device?
- Take the earbuds closer to the mobile device, make sure there is no radio- frequency interference. 2) Reset the earbuds by putting them back into the charging case, close the case for 20 seconds then take earbuds out and try again for pairing.
After Bluetooth connection is completed, translation cannot be started by touching the earbuds?
- Restart the APP then reconnect Bluetooth. 2) Reset the earbuds by putting them back into the charging case, close the case for 20 seconds then take earbuds out and try again for pairing.
Safety
Please read the following safety and warning information before using M6:
- Do not use unofficially recommended charging methods to avoid fire, explosion, or other dangers.
- Do not deliberately drop, burn, penetrate, squeeze or immerse in liquid to avoid product damage.
- Do not expose to high temperatures or around heating equipment such as microwaves or ovens.
- Use the device within the range of 0°C ~ 35°C and store within the range of -20°C ~ 45°C. If the temperature is too high or too low, it will cause the device to malfunction.
- We are not responsible for quality issues, product failures, and safety accidents caused by the use of unofficial approved accessories.
After-sales Service And Support
Order Number|
---|---
Return/Change| Return
Change| Reason|
Member ID|
Phone Number|
If you need to return or change the goods, please contact customer service
After confirmation, please fill in this form in detail, and return it with the
product
Harmful Substances
| Component | Hazardous Substance |
|---|---|
| Pb | Hg |
| Shell | 0 |
| Circuit Board | 0 |
The form is compiled according to SJ/T11364
0: Indicates that this hazardous substance contained in all homogeneous
materials of this part is below the limit requirement in GB/T 26572.
X: Indicates that this hazardous substance contained in at least one of the
homogeneous materials of this part is above the limit requirement in GB/T
26572.
Ten years environmental protection service life This product meets RoHS
environmental protection requirements. it will not affect the health of users
under normal use. (At present, there is no mature technology in the world to
replace or reduce lead content in electronic ceramics, optical glass, steel
and copper alloys.)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>