Eastcraft Lens Replacement link Instructions
- June 13, 2024
- Eastcraft
Table of Contents
Eastcraft Lens Replacement link Instructions
LENS REMOVAL
-
Hold the frame with the inside facing you in one hand and the lens change tool with the notch facing upwards in the other hand.
-
Slide the tool under the nose bridge, gently push forward to catch and release the tab that locks the lens latch onto the bottom inside of the nose bridge.
-
Open the latch completely.
-
Apply light pressure on the back of the lens while gently pulling the frame open to release the lens. First release the lens from the top tabs, followed by the bottom tabs and nose bridge.
-
When dual lenses are mounted, repeat lens removal on both sides.
LENS INSTALLATION
-
Insert the lens into the tabs of the nose bridge.
-
Gently push the lens down onto the frame at the bottom tab until it snaps into place.
-
Gently push the lens down onto the frame at the top tab until it snaps into place.
-
When installing dual lenses, repeat step 2 and 3 on both sides.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>