DIVINUS GT03 TWS Glasses Headset User Manual
- June 9, 2024
- DIVINUS
Table of Contents
DIVINUS GT03 TWS Glasses Headset
What’s in package
-
BT glasses
-
Glasses box
-
High-end glasses cloth
-
User guide
-
Portable storage bag
-
Dedicated charging cable
-
Magic Stick
Connecting cellphone
In the off state, press and hold the left MFB key and the right MFB key at the same time for about 4 seconds to turn on the machine. The left and right side will be automatically paired and enter the TWS normal pairing mode. Turn on the Bluetooth device to search for “GT03” and perform pairing.
Shut down
In the power-on state, long press the left MFB button or the right MFB button for about 4 seconds, the machine will turn off.
Voice assistant function
On connected state, triple-click any side to turn on the Siri or Android voice assistant; Click the MFB button on either side of the headset to turn off the Siri/Android voice assistant.
Warranty Card
Warranty content ( Fill in this card truthfully for warranty )
Product Name|
---|---
Product Model|
Purchase Date|
Purchase Seller|
User’s Name|
User’s Address|
Contact Detail|
Fault Description|
The following situations will not be repaired free of charge
- No warranty card or warranty card is damaged
- Device damage caused by self disassembly
- Damage caused by water, dropping or man made mechanical destruction
- Damage or fault caused by force majeure
Certificate
Inspector|
---|---
Inspection Date|
Manufacture Date|
GSE CO.,LTD
Liuhua West Street, Xiakou, Dongcheng District, Dongguan, Guangdong Province,
China
Designed by DIVINUS / Made in China https://divinustech.com
FCC Warning Statement:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of
the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The
device can be u sed in portable exposure condition without restriction
Play music
Press Right button 2s for next track 2S
Single click Right button for play & pause X1
2S Press Left button 2s for previous track
X1 Single click Left button for play & pause
Make phone calls
X1
X1
X2
Receiving calls
Single click either button for answering Double click either button for
rejecting
Ending calls
Single click either button for ending
Mode-switch
Under power-on state, double click either MFB for mode-switching
Reset
When the glasses are off, press and hold both MFB for 6s to enter pairing mode, and 5-click at both MFB, the white LED indicator keeps luminous for 1 second and being powered off afterwards and resetting is done. ( Reset device when earphone gets disconnected to each other or device get disconnected to both earphones)
Replace Magic sticks / Glasses frames
Charging
When battery gets low, glasses gives hint tone “Low Battery” every 2 minutes, white indicator flashes every 5 seconds (Devices gets off automatically in half an hour). Please charge the glasses with dedicated charge cable.
Product specifications
Chipset : Realtek 8763BFP
Bluetooth version: BT V5.0
Driver diameter ： ø11 mm
lmpedance ： 16 Ω
Sensitivity(S.P.L)： 105±3 dB
Frequency response ： 20 Hz-20K Hz
Microphone F.S. ： 42 dB
SNR ： 97 dBA
Audio codec supported ： SBC、AAC
Total Harmonic Distortion ： ≤0.2%
Dual mode Dual mode Support
Bluetooth profiles supported： A2DP AVRCP HFP HSP SPP
Bluetooth class： Class 2
Bluetooth range ： ＞10 M
Battery capacity of one earphone ：63 mAh x 2
Play time： 8 H
Call time ： 10-15 H
Standby time ： 100 H
Charging time ： 2 H
Dust/water protection level ： IPX5
Other function ： Replaceable frames
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>