avit AV13060 Full Peak Hard Hat Instructions

avit AV13060 Full Peak Hard Hat

Description

This safety helmet meets the requirements of European standard EN 397, providing protection from falling objects striking the top to the safety helmet.
Size: 55 – 66 cm
Material of Shell: HDPE

Marking

EN 397, BLUE EAGLE

Assembly/Adjustment

Assemble the safety helmets as the following instruction

1. Push the two clips into the slots on each side.
2. Push the other four clips into the slots.
3. Assemble chin strap as the instruction.
   

Warning

Check the safety helmet before use each time. Damaged safety helmet must be replaced immediately.
For adequate protection this helmet must fit or be adjusted to the size of the user’s head. The helmet is made to absorb the energy of a blow by partial destruction or damage to the shell and the harness and even through such damage may not be readily apparent, any helmet subjected to severe impact should be replaced.
The attention of users is also drawn to the danger of modifying or removing any of the original component parts of the helmet, other than as recommended by the helmet manufacturer. Helmet should not be adapted for the purpose of fitting attachments in any way not recommended by the helmet manufacturer.
Do not apply paint, solvents, adhesives or self‐adhesive labels, except in accordance with instructions from the helmet manufacturer.
No part of the safety helmet is known to cause any innocuousness for the user nor are they known to cause any skin irritation. Nevertheless, it may happen that materials which come into contact with the wearer’s skin could cause allergic reactions to susceptible individuals.

Inspection

Shell and suspension should be visually inspected before each use for signs of dents, cracks, penetration and damage due to impact, rough treatment or wear that might reduce the degree of protection originally provided. A cap with cracks, defective parts, or which has received a severe impact, should be removed from service.

Cleaning/Maintenance

The cap should be cleaned by wiping with a cloth moistened with warm water, and then the cap should be allowed to air dry. No strong or abrasive chemicals should be used. If the cap cannot be cleaned by this method it should be replaced.

Packing/Transportation

Wrap the helmet with soft material and packed in cartons when transporting the helmets.

Storage

Store the safety cap in a dry place, sheltered from sun light.

Manufacturing Date

Manufacturing date is on the helmet shell.

Service Life

The period of obsolescence of this product is 5 years.

Distributor Information

The Avit brand is owned by Carl Kammerling International Ltd
Glanydon Industrial Estate,
PWLLHELI
LL53 5LH
United Kingdom
Tel: +44 (0)1758 701070

Manufacturer Information

POLISON CORPORATION
282 Heping Second Road, Kaohsiung 80651, Taiwan (R.O.C.)

Test & Certification Notified Body

ALIENOR CERTIFICATION (Notified number 2754)
ZA du Sanital – 21 Rue Albert Einstein
86100 CHATELLERAULT‐France

References

• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>