ABUNRO MF300 Dual-Temperature Portable Hot Air Gun User Manual
- June 10, 2024
- ABUNRO
Table of Contents
ABUNRO MF300 Dual-Temperature Portable Hot Air Gun
Specification
- Brand ABUNRO
- Model MF300
- Size 240 x 50mm / 9.44 x 1.97inch
- Wire length 2M/6.6Inch
- Working temperature 200°C / 300°C
- Rated power 300W
- Rated voltage 110v
- Material ABS, Stainless Steel
- Power 50Hz
- Weight approx. 270g
- Working time 8 minutes
- Color Black
- Style Electronic
- Shape Square
- Power Source AC
- Wattage 300 watts
- Horsepower 300 hp
What’s In the Box
- 6.6ft 300W Mini Heat Gun
- User Manual
Precaution
- Avoid contact with water! Avoid contacting the hot nozzle.
- Use only inside. Keep it out of children’s reach. Keep the heat tool and item 5–6 cm apart.
- To avoid overheating, do not use it for longer than 10 minutes constantly.
- This hot air gun was created specifically for DIY; it cannot be used in an industrial setting.
Notice
- Can’t be disassembled and a minor repair welded on.
- Use a hot air gun at an angle other than 90 degrees.
- It is advised that the hot air gun’s air exit be 5–6 cm distant from the heated object.
- Work Time: 6 to 8 minutes (no more than 10 mins)
- If the temperature rises, please turn it off, and only use it after cooling.
Design For Secure Heat Dissipation
Product Layout
Product Description
A useful tool for Homemade crafts The polymer clay will harden and shine after using the mini hot air pistol, which is best used to substitute a toaster or an oven for heating shrinkable film, embossing powder, and rubber stamps. Please don’t use it for longer than 10 minutes at a time; instead, turn it off and then turn it back on to keep working.
-
Hot Gun for Soft Clay Art
The best instrument for soft clay art, with a temperature range of 200°C to 300°C, is this heat gun. quickly warms up to aid in molding soft clay. -
Stamping Powder
With the use of this embossing heat gun, you may emboss powder, which will melt and become smooth and dimensional as it does so. To prevent burning your fingertips, take caution and grip the object with tweezers. Make sure not to focus it for too long in one place. -
Hot gun plastic shrinking
Excellent and fascinating project with children. Use this heat gun to heat the plastic until it curls, shrinks, and then flattens after selecting the appropriate plastic, drawing whatever you wish, cutting out the form, and, if necessary, punching a hole in the charm. Make up tales and have adventures like shiny dinks. -
Blower Instrument
Remove all the small air bubbles as soon as possible to shorten the drying period for epoxy painting on cups, giving your homemade cup crafts a more smooth and more shining appearance. Cellophane on the auction baskets can also be shrunk using it.
Important Note
- Although this type of pistol cannot be adjusted for temperature, it theoretically heats up quickly at roughly 200°C.
- In order to avoid distortion, do not blow your Polymer Clay Works in the same location for an extended period of time.
- Due to its 300W low power, this heat gun is not a high-power one. Yet, it works well for melting rubber stamps, embossing powder, and shrinkable film, and is the ideal alternative to an oven or toaster. After using the gun, polymer clay will also harden and shine.
Features
-
Dual-Temperature Upgraded HEAT GUN
Dual Temperature (200°C-300°C) range. Cable, 6.5 ft. a Hot Gun For American clients, we specialize in designing DIY hot air fans. Electric Small Heat Gun 110V 300W 200°C / 300°C Portable Hot Air Gun for Multi-Function Hand-Held Heat Tools, DIY Craft Embossing, Shrink-Wrapping PVC, Paint, Clay, and Rubber Stamp Drying -
GUN SAFETY HOT
In the circuit for the hot air gun is the temperature control device. The temperature control shuts off the current when it abnormally reaches a specific height with abnormal heat, protecting the circuit’s safe functioning and preventing the occurrence of hazardous circumstances like high-temperature melting and fire. The body is made of ABS, which serves as the outlet and has features like heat resistance, low-temperature resistance, etc. -
AWESOME DESIGN
The left and right sides include heat sinks that can lower the internal temperature and extend the service life of the stainless steel bracket, which can swirl about 100 degrees and stand on the table safely. -
SIMPLE TO USE
It is quite simple to use. Simply maintain a distance of 3 to 5 centimeters from your DIY project while heating it at a 45-degree angle to prevent injury. Although the temperature cannot be altered, it can swiftly heat up to 200 to 300 degrees Celsius and perform flawlessly.
FAQs
What is the difference between MF300 and MF500?****
The difference is in the temperature. MF500 is 500℃,and MF300 is 300℃.
How to use?****
First, turn on the switch, then adjust the temperature, and then start to work.
How long can it be used continuously?****
It can be used continuously for 8 minutes at a time. Please take a break after 10 minutes of continuous use.
What should I do if it gets wet?****
Do not use it when it gets wet! Please let it dry naturally before you use it again. If you still want to use it after drying it with a towel, please make sure that there is no water left inside. If there is any water left inside, please contact us immediately for maintenance or repair.
Can a heat gun overheat?****
If it is blocked, the heat gun could overheat internally and catch fire or provide an electric shock. Never use a hot air tool near paper or other combustible or flammable materials, such as household cleaners. You shouldn’t touch the metal nozzle until the heat gun has had a chance to cool down completely.
What is the purpose of a heat gun?****
Typical applications include defrosting frozen pipes during winter cold snaps, removing flooring, reupholstering or repairing the furniture, stripping paint and outdated wallpaper when rebuilding or refurbishing, and more.
How long can you run a heat gun?****
However, it is advised against using a heat gun for more than 15 to 20 minutes nonstop before letting it cool.
Will a heat gun remove bubbles from resin?****
You can apply the surface with steady back-and-forth sweeps using a hot air gun. The surface tension is broken by the hot air, which causes the bubbles to pop. After your pour, you should be sure to do this as quickly as you can. Take caution not to overheat your resin if you plan to utilize a hot air pistol.
Does a heat gun use a lot of electricity?****
The vast majority of heat guns on the market today are corded electric models, and they require a lot of power. DIY models typically start out at around 1800 watts, while at the other end of the market, the Steinel HG 5000 E Professional Hot Air Tool is rated at 3400 watts and has a factory-sealed motor.
Are heat guns easy to use?****
When compared to blow torches, heat pistols are portable, simple equipment that is less likely to scorch wood or break glass. This indicates that they have mostly supplanted the traditional paraffin and bottled gas blow torch for removing paint from wood.
What temperature is a heat gun?****
A heat gun is a tool that may be carried in the hand and emits a stream of hot air that is typically between 100 °C and 550 °C (200-1000 °F) in temperature. Some hotter models can reach temperatures as high as 760 °C (1400 °F).
Does a heat gun remove all paint?****
Old paint, varnish, and other finishes can be easily removed with the aid of heat guns. They excel at simultaneously removing several coats of paint. By softening the paint and forcing it to bubble up, the heat gun makes it simple to remove using a metal scraper.
Video – Product Unboxing
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>