PUSAT Clutch Gamepad User Manual
- June 9, 2024
- PUSAT
Table of Contents
PUSAT Clutch Gamepad
Specification / Features
- Dual Wireless Controller (Bluetooth + 2.4Ghz Receiver)
- Bluetooth connect for NSW, Android, PC X-input
- Special storage design for nano receiver.
- Motion sensor function for NSW
- Vibration function for NSW, PC
- Interchangeable D-Pad
- Turbo function
- XYAB RGB leds indicators
- Built in 700mAH rechargeable battery (10-12 hours battery life time)
- Content : 1m Type-C charge cable, interchangeable D-pad 2.4GHz receiver, mobile device holder.
Device Button Layout
How to setup your controller for Android
Press the gamepad’s B and Home button around 5 seconds to start the controller
till the motor vibrates. The RGB LED of home button is flash quickly when
search the device.
- Turn on the Bluetooth connection your device
- Search and pair controller then choice the device name [PUSAT Clutch Gamepad] to connect
- The RGB LED of home button is green color after connect successful.
How to setup your controller for NSW
Turn on the console, enter the system settings:
- Go to [Airplane Mode] and select to turn it on.
- Scroll down and select [Controller Connection (Bluetooth)] to turn on Bluetooth connectivity while in Airplane Mode.
- Go to the [Controllers] and select the [ Change Grip / Order]
- Press the gamepad’s Home button till the motor vibrates, to enter the pair mode start to pairing. The RGB LED is flashes quickly when search the device.
- To choice the device of Gamepad and the RGB LED of home button is keep to lighting for successful connecting.
How to setup your controller for X-Input
Press the gamepad’s Y and Home button around 5 seconds to start the controller
till the motor vibrates.
The RGB LED is flash quickly when search the device.
- Turn on the Bluetooth connection your device.
- Search and pair controller then choice the device name [Xbox Wireless Controller] to connect.
- The RGB LED of home button is blue color after connect successful.
How to set your controller for X-Input and Android with receiver
Connect the receiver with your computer then long press the Home button to
start the connection.
The RGB LED of home button is blue color after connecting. You can push both
the start (+) and back (-) buttons to switch for Android mode. The RGB LED of
home buttonis red color. Remark : This controller has internal memory chip in
2.4GHz mode, it will remember the previous mode setting. You can press and
hold the start (+) and back (-) buttons to switch mode.
| Connecting | Device | Buttons | RGB LED indicator |
|---|---|---|---|
| BLUETOOTH | NSW | HOME | Assigned by console |
| ANDROID | B+HOME | ||
| X-Input | Y+HOME | ||
| 2.4GHz | X-Input | HOME | |
| ANDROID | BACK + START |
How to set the TURBO function
Push and hold the Turbo button, the push one or more buttons of “A, B, X, Y,
L1, R1, L2, R2” at the same time.
You may enjoy the turbo action. When you want to cancel the turbo continuous
action function, push and hold Turbo button and push your previous defined
turbo button at the same time. Then, the turbo action function will cancel
automatically. To press the Turbo button around 5 seconds and the right sticks
(R3) upward or down to adjust the speed of turbo. This Turbo function is
support when connect with the Android, X-Input. It is the photo function when
connect with the Switch console.
Charging and sleeping mode
The controller will turn itself off when the battery charge is too low for
normal use. If the controller is paired with a device, it will shut-off after
five minutes of inactivity in order to conserve power for sleep mode. You can
also push the HOME button to reconnect. When the battery is low, the RGB LED
of HOME button will flash quickly
and closed the vibration function. Connect the gamepad to a standard, active
USB port for charging. The HOME button will flash slowly when the gamepad is
charging. It will be off once the battery is fully charged.
It will turn off the power of controller when you long press the HOME button.
Adjustable Vibration Function for NSW
You can adjust the vibration intensity by pressing the left stick (L3) and the right sticks (R3) upward or down to get a better gaming experience as needed.
REMARKS :
This gamepad are built-in lithium battery, please follow the normal operation
of lithium battery’s specification standard to use. If the battery without
used and charger for a while, maybe the life of battery will shortened even
failure cause the gamepad damaged.
Turning XYAB button lights on and off
Press the A key and the back key together to activate/deactivate the backlight
of the buttons.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>