legrand G6017TX 6000 Series Combination Internal External Elbow Fitting User Guide

WIREMOLD®

Steel Raceway

Large Capacity, Two-Piece Steel Surface Raceway

6000® Series Raceway can be used divided for separate wiring circuits or multi-service applications. For large cabling installations, 6000 can be used undivided as headers and feeders or to bring wiring to a specified location. 6000 Series Raceway is ideal for all applications requiring a high cable capacity, dual service steel raceway. Commercial, institutional, and industrial applications all benefit from the 6000 Series rigid steel construction and durable Ivory ScuffCoat™ finish. 6000 Series Raceway is also ideal for municipalities that require either all steel construction or prohibit nonmetallic cable management systems.

6000® Series Raceway shown as a divided system with Activate inserts and power device with a 4050 device bracket.

FEATURES & BENEFITS

• Steel raceway. Provides superior strength for any dry interior location installation.
• Extra large cross sectional area. Provides space for large wiring requirements or installations that use large diameter cable for power and/or data/communications.
• Dividable raceway base. Snap-in divider creates two-compartment raceway. For bringing large amounts of power and data/communications cable to one location.
• Complete line of fittings. Provides complete wiring solution and allows for interconnection between raceway systems.
• Gray baked enamel and Ivory ScuffCoat finish. Enamel finish assures durability; can be easily overpainted. Durable Ivory Scuffcoat finish makes a scratch resistant surface.
• Installs as a feeder or header raceway. Ideal for overhead, open spaces and underfloor applications.
• Accommodates large size devices. Large size raceway accepts single- and dual-gang devices up to 100 amps and circuit breakers up to three pole.
• Pre-cut covers for standard outlet center locations. For mounting devices on various centers without cutting the covers which reduces number of field cuts for labor savings.
• Base and cover cutters. Manually operated cutters are lightweight and portable. Cutters offer labor savings for any size job and maintain a factory clean and square cut.
• Communication connectivity options. Accepts industry standard and proprietary devices from a wide range of manufacturers to provide a seamless and aesthetically pleasing interface for voice, data, audio, and video applications at the point of use.
• ADA compliant. Raceway and fittings can be installed in conformance with ADA requirements.
• UL Listed and CSA Certified. Raceway UL file E4376 Guide RJBT, CSA file LR350. Fittings UL file 41751 Guide RJPR, CSA file 350 and 48952.

Download this product’s PEP ecopasport® environmental product declaration at www.legrand.us/resources-and-downloads. This declaration conforms with ISO 14025 and 14040 and is in alignment with EN 15804.

4047 Series  Faceplates accommodate a wide range of power and communications applications.

ED530R18 – Updated April 2017 – For latest specs visitwww.legrand.us/wiremold

6000 Series Raceway System Layout

NOTE: Illustration is for showing single service product application only.

6000 Raceway Wire Fill Capacity for Power

WIRE SIZE THHN/THWN

| O.D.|

NUMBER OF CONDUCTORS (40% FILL)

---|---|---
WITHOUT DEVICES|

WITH DUPLEX RECT. DEVICES
1.59 in.² (1025mm² )

inches| (mm)| UNDIV.| DIVIDED| UNDIV.|

DIVIDED

14 AWG

| 0.111| (2.8)| 659| 296| 528|

231

12 AWG

| 0.130| (3.3)| 481| 216| 385| 168
10 AWG| 0.164| (4.2)| 303| 136| 243|

106

8 AWG

| 0.216| (5.5)| 174| 78| 140| 61
6 AWG| 0.254| (6.5)| 126| 56| 101|

44

4 AWG

| 0.324| (8.2)| 77| 34| 0| 0
3 AWG| 0.352| (8.9)| 65| 29| 0|

0

2 AWG

| 0.384| (9.8)| 55| 24| 0| 0
1 AWG| 0.446| (11.3)| 40| 18| 0|

0

1/0 AWG

| 0.486| (12.3)| 34| 15| 0| 0
2/0 AWG| 0.532| (13.5)| 28| 12| 0|

0

WIRE SIZE THHN/THWN

| O.D.| NUMBER OF CONDUCTORS (40% FILL)
---|---|---
WITH SURGE/ GFCI DEVICES
2.30 in. ² (1485mm ² )|

LARGE SINGLE RECEPTACLES
3.00 in.² (1935mm²)

inches

| (mm)| UNDIV.| DIVIDED| UNDIV.| DIVIDED
14 AWG| 0.111| (2.8)| 470| 202| 412|

173

12 AWG

| 0.130| (3.3)| 342| 147| 300| 126
10 AWG| 0.164| (4.2)| 216| 92| 189|

79

8 AWG

| 0.216| (5.5)| 124| 53| 109| 45
6 AWG| 0.254| (6.5)| 89| 38| 78|

33

4 AWG

| 0.324| (8.2)| 0| 0| 0| 0
3 AWG| 0.352| (8.9)| 0| 0| 0|

0

2 AWG

| 0.384| (9.8)| 0| 0| 0| 0
1 AWG| 0.446| (11.3)| 0| 0| 0|

0

1/0 AWG

| 0.486| (12.3)| 0| 0| 0| 0
2/0 AWG| 0.532| (13.5)| 0| 0| 0|

0

NOTE: For additional information, refer to the Technical Section of ED1560 (Product Guide).

6000 Raceway Cable Fill Capacities for Data/Communications

CABLE TYPE

| CATEGORY / DESIGNATION| O.D.| DIVIDED 40% FILL| UNDIVIDED 40% FILL
---|---|---|---|---
Inches|

(mm)

UNSHIELDED TWISTED PAIR| 4-PAIR, 24 AWG Cat 3|

0.190

| (4.8)| 101|

225

4-PAIR, 24 AWG Cat 5e|

0.210

| (5.3)| 83|

184

4-PAIR, 24 AWG Cat 6|

0.250

| (6.3)| 58|

130

4-PAIR, 24 AWG Cat 6a*|

0.354

| (9.0)| 29|

65

25-PAIR, 24 AWG Cat 6|

0.410

| (10.4)| 21|

48

TELEPHONE| 2-pair, 24 AWG|

0.140

| (3.6)| 187|

415

3-pair, 24 AWG|

0.150

| (3.8)| 163|

362

4-pair, 24 AWG|

0.190

| (4.8)| 101|

225

25-pair, 24 AWG|

0.410

| (10.4)| 21|

48

COAXIAL| RG58/U|

0.195

| (5.0)| 96|

214

RG59/U|

0.242

| (6.1)| 62|

139

RG62/U|

0.242

| (6.1)| 62|

139

RG6/U|

0.270

| (6.9)| 50|

111

TWINAXIAL| 100 Ohm|

0.330

| (8.4)| 33|

74

SHIELDED TWISTED PAIR| TYPE 1|

0.390

| (9.9)| 24|

53

TYPE 2|

0.465

| (11.8)| 16|

37

TYPE 3|

0.245

| (6.2)| 61|

135

FIBER| Mini ZipCord|

0.079 x 0.157

| (2 x 4)| 232|

516

ZipCord|

0.118 x 0.236

| (3 x 6)| 103|

230

Round 4 Strand Fiber|

0.187

| (4.8)| 104|

233

Round 6 Strand Fiber|

0.256

| (6.5)| 55|

124

NOTE: Capacity range is calculated at 20% to 40% of raceway area as stated in a proposed revision to the Commercial Building Standard for Telecommunication Pathways & Spaces, TIA/EIA-569. Actual wire fill capacity may vary based on applications, cable types, and number, as well as type of fittings. (Fitting may cause additional variances to the fill capacity.)

* Category 6 augmented (6a) cable for 10 gigabit ethernet – max allowed cable diameter per addenda No. 11 ANSI TIA/EIA 568-B.2.

6000 Series Raceway Ordering Information

V6000B-10
G6000B010| Base – .060″ (1.5mm) galvanized steel. Packed two 10′ (3m) lengths per carton. Base has two 9/32″ diameter trade size KOs 1 1/4″ (32mm) from each end and on centers of approximately 18″ (457mm) throughout.
V6000C
G6000C| Cover – 040″ (1.0mm) galvanized steel. Packed four 5′ (1.5m) per carton.
G6000DA**

| Divider – .040″ (1.0mm) galvanized steel. One side painted buff primer to provide identification of compartments. Packed four 5′ (1.5m) lengths per carton.
660B

| Base Cutter – Portable base cutter. Steel constructed provides clean and easy square cuts. Manual operation required.
660BDK| Replacement Blade Kit – Replacement blade and die set for 640B Cutter.
640C

| Cover Cutter – Portable cover cutter. Steel constructed provides clean and easy square cuts. Manual operation required.
640CDK| Replacement Blade Kit – Replacement blade and die set for 640C Cutter.
IWE-S
GWE-S| Spray Paint – Used for touching up large areas. Contains 12 oz. of paint.

NOTE: Can only be shipped via ground transportation.

IWE-P
GWE-P| Touch-Up Paint Pen – Used for touching up small areas. Contains 0.3 oz. of paint.
6001A

| Coupling – For joining lengths of 6000B.
G6000WC

| Wire Clip – For holding conductors in place. Use only with undivided 6000 Series Raceway.
G6001DA†

| Divider Clip – For holding G6000DA Divider in place to divide raceway into 1/3, 1/2, or 2/3 compartments. 6000 Raceway divided into 1/3 compartments will not accept devices.
G6001TX

| Converter Coupling – For converting 6011TX or 6017TX into a tee or cross. For tee, one required; for cross, two required.
G6008A

| C-Hanger – For suspending 6000 or 4000 Raceway from structural ceiling. Designed for use with 3/8″ (9.5mm) rod. Hangers should be installed no more than 4′ (1.2m) apart along raceway run. Can be bolted back-to- back for dual runs of 4000, 6000, or to a G3008C for combined runs with 3000 Raceway.
**V4000C075/G4000C075***

| Pre-Cut Cover 7.5″ (191mm) – For mounting devices on 12″ (305mm) centers with 4047 Series Cover Plates.
V4000C135/G4000C135

| Pre-Cut Cover 13.5″ (345mm) – For mounting devices on 18″ (457mm) centers with 4047 Series Cover Plates.
V4000C195/G4000C195

| Pre-Cut Cover 19.5″ (495mm) – For mounting devices on 24″ (610mm) centers with 4047 Series Cover Plates.
V4000C315/G4000C315

| Pre-Cut Cover 31.5″ (800mm) – For mounting devices on 36″ (915mm) centers with 4047 Series Cover Plates.
V6006
G6006| Connection Cover – Use where two sections of 4000 or 6000 Series Raceway Cover, not squarely cut, come together.
V6010B
G6010B| Blank End Fitting – For closing open end of 6000 Series Raceway.
V6011TX
G6011TX| Combination Flat Elbow – For using as a flat elbow, tee, or cross, (one 6001TX required for tee; two for cross; not included).
V6012TX
G6012TX| Internal or External 45° Elbow – For making internal or external 45° turns in a run of 6000 Series Raceway. Can also be assembled as an inverted 45° elbow.
V6014A
G6014A| Connector Fitting – Has 1 1/4″, 1 1/2″ and 2″ (32mm, 38mm and 51mm) trade size KOs in back and on each side.
V6017TX
G6017TX| Combination Internal/External 90° Elbow – For use as internal or external elbow, straight-through fitting, tee, or cross (one G6001TX required for tee or straight through fitting; two for cross; not included).
V6046KD
G6046KD| Circuit Breaker Housing – KOs in cover can be removed for installation of three single-pole breakers. For use with the following breakers rated 100A maximum.

MANUFACTURER

| SERIES
General Electric Westinghouse|

THQC, THHQC Quicklag, C, QCH

V6074
G6074| Take-Off Connector (6000 to 6000) – For 90° tee connection at any point along a run of 6000.
V6074A
G6074A| Take-Off Connector (6000 to 4000) – For 90° tee connection at any point along a run of 6000.
V6086
G6086| Panel Connector – For connecting 6000 with surface type panel boxes. Accommodates maximum wire capacity of 6000 system. Separate C-flange fits around raceway, covering uneven cuts to the box. Cut 4 3/4″ x 3 9/16″ (121mm x 90mm) hole in panel box.
V6007C-1
G6007C-1| Single-Gang Device Cover – For vertical mounting single-gang devices on undivided raceway. Accepts commercially available wall plate (sold separately).
V6007C-2
G6007C-2| Two-Gang Device Plate – For installing two-gang devices or two vertically mounted single-gang devices on undivided raceway. Accepts commercially available wall plate (sold separately).

* 4000C and 6000C are compatible with 4000B and 6000B Raceway.
** G6001DA Divider Clips are required to hold divider in place.
† G6001DA Divider Clips are required to hold divider in place.

4047 Series Cover Plates Ordering Information

V4047AX
G4047AX | Two-Gang Overlapping Cover Single Round Opening – For straight blade and locking single receptacles with face diameters of 1.38″ to 1.39″ (35mm to 36mm).
V4047BX
G4047BX | Two-Gang Overlapping Cover Duplex Receptacle – For 15A and 20A duplex receptacles. Accepts 106 Communications Duplex Frame.
V4047BB
G4047BB | Two-Gang Overlapping Cover Two Duplex Receptacles – For 15A and 20A duplex receptacles. Accepts 106 Communications Duplex Frame.
V4047BF
G4047BF | Two-Gang Overlapping Cover Duplex & Modular Furniture – For 15A and 20A duplex receptacles. Includes combination Modular Furniture and two Keystone twistouts. Accepts modular furniture adapter.
V4047BM
G4047BM | Two-Gang Overlapping Cover Duplex & 2A Mini adapter – For 15A and 20A duplex receptacles. Includes Mini adapter. Accepts Pass & Seymour® Activate inserts & Wiremold CM2 Series Open System Communication Modules.
V4047BS
G4047BS | Two-Gang Overlapping Cover Duplex & Series II Mini Adapter – For 15A and 20A duplex receptacles. Includes Mini adapter. Accepts one Ortronics® Series II Communication Insert.
V4047BT
G4047BT | Two-Gang Overlapping Cover Duplex & TracJack Mini Adapter – For 15A and 20A duplex receptacles. Includes Mini adapter. Accepts two Ortronics® TracJack Communication Inserts.
V4047C-1
G4047C-1 | One-Gang Overlapping Device Plate – Use with commercially available single-gang flush plate (sold separately).
V4047C-2
G4047C-2 | Two-Gang Overlapping Device Plate – Use with commercially available two-gang flush plate (sold separately).
V4047JX
G4047JX | Two-Gang Overlapping Cover Single Round Opening – For straight blade and single locking receptacles with face diameters or 1.56″ – 1.58″ (39mm – 40mm).
V4047RX
G4047RX | Two-Gang Overlapping Cover Rectangle Opening – For rectangular GFCI, Surge and decorator style devices. Does not accept 5507 Series Faceplates.
V4047RF
G4047RF | Two-Gang Overlapping Cover Rectangle Opening & Modular Furniture – For rectangular GFCI, Surge and decorator style devices. Does not accept 5507 Series Faceplates. Accepts modular furniture adapter and keystone RJ45 jacks.
V4047WX
G4047WX | Two-Gang Overlapping Cover with One Duplex Receptacle Installed – Includes one Pass & Seymour Duplex Receptacle with 12″ wire leads installed on bracket.
V4047WF
G4047WF | Two-Gang Overlapping Cover with One Duplex Installed & Modular Furniture Opening – Includes one Pass & Seymour® 20 A Duplex Receptacle with 12″ wire leads installed on bracket. Includes combination Modular Furniture and 2 Keystone Twist Out. Accepts modular furniture adapter and keystone RJ45 jacks.
V4047WM
G4047WM | Two-Gang Overlapping Cover with One Duplex Installed & Activate Mini adapter – Includes one Pass & Seymour® 20A Duplex Receptacle with 12″ wire leads installed on Bracket. Includes Mini adapter. Accepts Activate inserts & Wiremold CM2 Series Open System Communication Modules.
V4047WS
G4047WS | Two-Gang Overlapping Cover with One Duplex Installed & Series II Mini adapter – Includes one Pass & Seymour® 20A Duplex Receptacle with 12″ wire leads installed on Bracket. Includes Mini adapter. Accepts one Ortronics® Series II Communications insert.
V4047WT
G4047WT | Two-Gang Overlapping Cover with One Duplex Installed & TracJack Mini adapter – Includes one Pass & Seymour® 20A Duplex Receptacle with 12″ wire leads installed on Bracket. Includes Mini adapter. Accepts two Ortronics® TracJack Communications inserts.
V4047-2BBBB
G4047-2BBBB | Four-Gang Overlapping Cover Four Duplex Openings – For 15A and 20A duplex receptacles. Accepts 106 Communication Duplex Frame.
V4047-2BBFF
G4047-2BBFF | Four-Gang Overlapping Cover Two Duplex & Two Modular Furniture Openings – For 15A and 20A duplex receptacles. Includes combination Modular Furniture & four Keystone Twistouts. Accepts keystone RJ45 or modular furniture adapter.
V4047-2BBMM
G4047-2BBMM | Four-Gang Overlapping Cover Two Duplex & Two Activate Mini Adapters – For 15A and 20A duplex receptacles. Includes Mini adapter. Accepts Activate inserts & Wiremold CM2 Series Open System Communications Modules.
V4047-2BBSS
G4047-2BBSS | Four-Gang Overlapping Cover Two Duplex & Two Series II Mini Adapters – For 15A and 20A duplex receptacles. Includes Mini adapter. Accepts two Ortronics® Series II Communication inserts.
V4047-2BBTT
G4047-2BBTT | Four-Gang Overlapping Cover Two Duplex & Two TracJack Mini Adapters – For 15A and 20A duplex receptacles. Includes Mini adapter. Accepts four Ortronics® TracJack Communications inserts.
V4047-2BBXX
G4047-2BBXX | Four-Gang Overlapping Cover with Two Duplex Openings – For 15A and 20A duplex receptacles.
Accepts 106 Communication Duplex Frame.
V4047-2RRXX
G4047-2RRXX | Four-Gang Overlapping Cover Two Rectangular Openings – For rectangular, GFCI, Surge and decorator style devices. Does not accept 5507 Series Faceplates.
V4047-2WWFF
G4047-2WWFF | Four-Gang Overlapping Cover Two Duplex Installed & Two Modular Furniture Openings – Includes two, Pass & Seymour® 20A Duplex Receptacles with 12″ wire leads installed on Bracket. Includes combination Modular Furniture & four keystone Twistouts. Accepts modular furniture adapter or RJ45.
V4047-2WWMM
G4047-2WWMM | Four-Gang Overlapping Cover with Two Duplex Installed & Two Activate Mini Adapters – Includes two Pass & Seymour® 20A Duplex Receptacle with 12″ wire leads installed on Bracket. Includes Mini adapter. Accepts two Activate inserts & Wiremold CM2 Series Open System Communication Modules.
V4047-2WWSS
G4047-2WWSS | Four-Gang Overlapping Cover with Two Duplex Installed & Two Series II Mini Adapters – Includes two Pass & Seymour® 20A Duplex Receptacles with 12″ wire leads installed on Bracket. Includes Mini adapter. Accepts two Ortronics® Series II Communication inserts.
V4047-2WWTT
G4047-2WWTT | Four-Gang Overlapping Cover with Two Duplex Installed & Two TracJack Mini Adapters – Includes two Pass & Seymour® 20A Duplex Receptacles with 12″ wire leads installed on Bracket. Includes Mini adapter. Accepts four Ortronics® TracJack Communications inserts.
V4047-2WWXX
G4047-2WWXX | Four-Gang Overlapping Cover with Two Duplex Receptacles Installed – Includes two Pass & Seymour® 20A Duplex Receptacles with 12″ wire leads installed on Bracket.
V4047UX
G4047UX| Bump-Up Extron® MAAP Device Plate – Accepts four Extron® Electronics MAAP single space modules.
V4047VX
G4047VX| Bump-Up Extron® AAP Device Plate – Accepts two Extron® Electronics AAP single space modules.

NOTE: Faceplates can also be used with 6000 Series Raceway.
Add “C” prefix to denote Canadian version – UL Listed to U.S. and Canadian Safety Standards.

4047 Series Configurable Cover Plates Number Logic

1. For “X”, Choose one of the following options:

V  Ivory & UL Listed       CV  Ivory & cULus Listed (Canada only)
G  Gray & UL Listed       CG  Gray & cULus Listed (Canada only)

2. Choose a Plate Configuration:

Two-Gang Plate:

Four-Gang Plate:

3. For “Y”, Choose any combination of configurations from the options listed below:

A. 1.41″ (35.8mm) Diameter, Single Round Receptacle
B. Duplex Receptacle Opening
F.  Combination Modular Furniture & **2 Keystone Twist Out
H. Mouse Hole Twist Out & Grommet
J.    1.59″ (40mm) Diameter, Single Round Receptacle
M. Pass & Seymour Activate 2A Mini **adapter Opening with Adapter
R. Rectangular Receptacle
S.  Ortronics Series II 2A Mini adapter Opening with Adapter
T.   Ortronics TracJack 2A Mini Adapter Adapter Opening with Adapter
W. Pass & Seymour Light Almond 20 Amp **Receptacle pre-pigtailed with 12″ wire leads installed on Bracket
X. Blank
Z. 3 Keystone Twist Out**

4. Finished Part Number

4047             4047-2

NOTE: For additional colors or configurations, call 1-800-621-0049, option 2.

4000 Series Faceplates Ordering Information

V4046H-2
G 4046H-2| Tap-Off Fitting – Has four concentric 1/2″ and 3/4″ trade size KOs.
V6007C-1
G 6007C-1| Single-Gang Device Cover – For vertical mounting single-gang devices on undivided raceway. Accepts commercially available wall plate (sold separately).
V6007C-2
G 6007C-2| Two-Gang Device Plate – For installing two-gang devices or two vertically mounted single-gang devices on undivided raceway.

• Accepts commercially available wall plate (not furnished). 

NOTE: Faceplates can also be used with 6000 Series Raceway.
Add “C” prefix to denote Canadian version – UL Listed to U.S. and Canadian Safety Standards.

Communication Endplates Ordering Information

**ARA-S2***

| Angled Raceway Adapter – For use with 4050 device brackets and WallSource device mounting brackets. Angled exit provides additional mounting depth required for A/V connections as well as ensuring the required bend radius for UTP and fiber optic cabling. Holds two Ortronics® Series II modules. Fits 5507 Series Faceplate opening.
**CM-ARA***

| Angled Raceway Adapter – For use with 4050 device brackets and WallSource device mounting brackets. Angled exit provides additional mounting depth required for A/V connections as well as ensuring the required bend radius for UTP and fiber optic cabling. Holds two Wiremold CM2 Series Open System modules or two Pass & Seymour® 2A inserts. Fits 5507 Series Faceplate opening.
**CM-EPLA***

| End Plates – Includes two outlet identification labels with clear covers and two matching screw covers. Required for mounting Pass & Seymour® Activate and Wiremold CM2 Series Open System communication modules into 4050 Series device brackets.
**S2-EPL***

| End Plates – Includes two outlet identification labels with clear covers and two matching screw covers. Required for mounting Ortronics Series II modules into 4050 Series device brackets.

* Add “G” suffix to indicate gray finish.

V/G4050 & 5507 Series Faceplates Ordering Information

V4050
G 4050| Device Mounting Bracket – High impact plastic mounting bracket and trim plate which overlap raceway cover providing a seamless transition. For use with 5507 Series Faceplates, Ortronics® TracJack &Series II Modules, Pass & Seymour Activate Series Inserts, and Wiremold CM2 Series Open System Communication Modules.
**5507AD***

| Modular Furniture Adapter – For mounting modular furniture adapters.
**5507B***

| Blank Faceplate – For covering unused compartments in the device bracket.
**5507D***

| Duplex Faceplate – For covering duplex style devices. Accepts 106 Communication Duplex Frame.
**5507R***

| Rectangular Faceplate – For covering rectangular style devices.
**5507S***

| Rectangular Spacer – For mounting commercial device plates. Installs between the device bracket and a device.
**5507SW***

| Switch Faceplate – For covering standard toggle switches.
**5507T1***

| Single Receptacle Faceplate – For covering single receptacles – 1.59″ (40.4mm) diameter.
**5507T2***

| Single Receptacle Faceplate – For covering single receptacles – 1.41″ (35.8mm) diameter.
**5507RJ***

| Dual RJ11/RJ45 Connector Faceplate – For mounting one or two RJ type keystone connectors – has one opening and a KO for the other.
**5507FRJ***

| Flush Dual RJ11/RJ45 Faceplate – Same as 5507RJ except the connectors are recessed to provide a flush installation.
5507AAP

| Extron® AAP Faceplate – Accepts two Extron® Electronics AAP single space modules.
5507MAAP

| Extron® MAAP Faceplate – Accepts four Extron® Electronics MAAP single space modules.
**5507-4TJ***

| Ortronics Faceplate – For mounting Ortronics® communication inserts. Accepts four TracJack Devices.
**5507-6TJ***

| Ortronics Faceplate – For mounting Ortronics® communication inserts. Accepts six TracJack Devices.

NOTE: All faceplates are 4 1/4″ long x 1 11/16″ wide (108mm x 43mm).
* Add “G” suffix to indicate gray finish.
Not for use with 4047BF and 4047RF Device Covers.

NOTES

NOTE: All brand and product names referenced in this document are registered trademarks or trademarks of their respective holders.

NOTE: The paper used to print this document is an environmentally responsible paper with 10% post consumer waste, with FSC and SFI Chain of Custody certifications, Lacey Act complaint. 100% of the electricity used to manufacture Flo sheets is generated with Green-e certified renewable energy.

Electrical Wiring Systems

60 Woodlawn Street
West Hartford, CT 06110
Phone: 1.877.BY.LEGRAND (295-3472)
www.legrand.us

570 Applewood Crescent
Vaughan, Ontario L4K 4B4
Phone:905.738.9195
www.legrand.ca

ED530R18 – Updated April 2017 – For latest specs visitwww.legrand.us/wiremold
© Copyright 2017  Legrand  All Rights Reserved

References

• Legrand CA | Delivering and Managing Power, Light, and Data
• Legrand US | Delivering and Managing Power, Light, and Data
• Resources
• Wiremold Wire and Cable Management Products from Legrand

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>