QOMO QPC100S ScannerCam 100S 4k Document Camera User Guide

: June 13, 2024
: QOMO

scanner cam 100s

4K DOCUMENT CAMERA

QPC 100S

Quick Start Guide

Please read this guide before using the product.

Step 1. Instructions

Thank you for your purchase of the ScannerCam 100S (QPC100S) by QOMO. The ScannerCam 100S document camera is a high-quality and easy-to-use 4K document camera with HDMI and USB plug-n-play connection. This quick start guide briefly describes the steps to get started using your new document camera. If you have any technical or service questions about the product, please e-mail our customer service at support@qomo.com. For additional tutorial videos and software download, visit www.qomo.com

Limited Warranty

Your QOMO document camera includes a warranty guarantee of 2 years from the date of purchase. For more details on warranty coverage, please visit www.qomo.com/warranty.

Warranty Exclusions

The following circumstances are excluded from warranty coverage:

Product damage caused by catastrophes, faulty electric power, and environmental factors.
Defacing of product labels (label alterations and falsifying, serial number missing, serial number no longer discernible, serial number invalid). All serial numbers are recorded and tracked for warranty purposes.
Unauthorized changes of non-parts, modifications or alterations, parts removal in or to the products.
Damage caused by operator error or operator fails to comply user manual instruction, such as, but not limited to improper storage resulting in product get wet, corrosion, ell off, squeezed or exposed to inadequate temperature/humid environment.
Accessories or packing material such as boxes, user manual, etc.

Safety & Environmental Information

This device complies with part 15 of the FCC rules and CE certification.
Discarded electrical and electronic appliances are recyclable and should be separate from household waste. Please actively support in conserving resources and protecting the environment by returning this appliance to the collection centers.

System Requirements

Intel i5 Processor or Higher

USB Port
At least 4GB RMB (Recommended 8GB)
20GB Available HDD Space
Windows, Mac, Chrome OS

Step 2. Specifications

Image Sensor	1/3.06”, 13 MP CMOS Sensor
F/NO (Infinite)	2.2
TV lines	1100
Max. Shooting Area	430mm x 320mm (17″x12.6″)
Max. HDMI Output Resolution / FPS	3840×2160@30fps (4K, 16:9)
USB Output Resolution / FPS	4192×3104@10fps (13MP, 4:3)

NOTE: Specifications are subject to change without notice

Step 3. Unpacking

Before use, make sure the following items are included in the package.
If anything is missing, contact the retailer where you purchased the product.

QPC100S 4K Document Camera
USB Type-A to C Cable
Quick Start Guide
Warranty Card

1

2 3 4

Step 4. Parts Descriptions

Control Panel

Rotate Selection
Zoom Selection
Shuttle Wheel
– Press a selection button (Rotate, Zoom, Brightness, Focus) then turn the shuttle wheel to adjust the value.
– Press the shuttle wheel to enter the PTZ mode then click ▲,▼,◄, & ► to pan and tilt the image.
– Press again the shuttle wheel to exit the PTZ mode.
Focus Button
Brightness Selection
Resolution Switch
Freeze Button
Lamp Button
Power Button
Adjustable Hinge 135°
Lens
Lamp
90°
USB/HDMI Mode Switch
Safety Lock
Reset Hole
50Hz/60Hz Switch
HDMI Output
USB Output TYPE-C to A
Microphone
Power LED Indicator
Control Panel
Adjustable Height

Step 5. Start Using

1. Start by lifting the camera head.
2. Hold steady the base of the unit to assist.

3. Place a document or object to be displayed under the camera.
4. Press the power button to turn on the power.
5. Adjust the arm to change the height and position for capturing your image.

Step 6. Connection Settings

USB Mode Connection

Switch to the USB connection mode at the side of the doc cam.
Plug the supplied USB type-C to A cable to the doc cam and connect the other end to your computer’s USB port.

a. USB HDMI
b. USB Cable
c. Computer
d. Projector

HDMI Mode Connection

Switch to the HDMI connection mode at the side of the doc cam.
Plug the USB cable into the USB power adapter.
Connect to a projector, monitor, TV(HDTV), or QOMO Interactive Panel.

a. USB HDMI
b. USB Cable
c. HDMI Cable
d. Warning: Only a UL or CCC certified power supply can be used; the electrical rated output is 5V DC, minimum is 1A, and using other power support may induce risk.
e. Monitor or TV(HDTV)
f. Projector

Step 7. Software Download

The ScannerCam 100S is a standard UVC camera — you can use it with a variety of software that supports UVC camera connection. The ScannerCam S is compatible with the third-party video conferencing softwares Zoom, Microsoft Teams, or Google Meet. However, to get the full functionality of this 4K document camera, we recommend using it with the QOMO QCamera software. QCamera is compatible with Windows, MAC, and Chrome OS and is free of use for all QOMO customers.

To download, use the link below.

1. Download QCamera
https://www.qomo.com/software

For the more get-started tips about using the ScannerCam 100S and QCamera software, check out our easy tutorial videos on the QOMO website at www.qomo.com/instructional-videos

qomo.com 1-866-990-7666 support@qomo.com

V1.1