Schneider Electric METSEPM5660 PowerLogic Measuring Center Installation Guide
- June 13, 2024
- Schneider Electric
Table of Contents
Power Logic™ METSEPM55GRMD
Installation Guide
PowerLogic™ PM5560 Series Grounding Module
To download user manuals and other documentation, visit www.se.com. Type PM5500 in the search field.
Safety Precautions
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
- Apply appropriate personal protective equipment (PPE) and follow safe electrical work practices. See NFPA 70E in the USA, CSA Z462 or applicable local standards.
- Turn off all power supplying this device and the equipment in which it is installed before working on the device or equipment.
- Always use a properly rated voltage sensing device to confirm that all power is off.
- Do not exceed the device’s ratings for maximum limits.
- Only connect ground (earth) to the ground terminal; do not connect voltage.
- Replace all devices, doors, and covers before turning on power to this equipment.
Failure to follow these instructions will result in death or serious injury.
Dimensions
Wiring
Installing Grounding Module
Removing Grounding Module
Technical Specifications
Environment
- 25 to 70 °C (-13 to 158 °F) operating temperature
- Humidity rating: 5% to 95% RH noncondensing, maximum dewpoint 37 °C (99 °F)
- Pollution degree 2
- Altitude: ≤ 3000 m (9843 ft)
- For indoor use only
Notices
Read these instructions carefully and look at the equipment to become familiar
with the device before trying to install, operate, service or maintain it.
Electrical equipment should be installed, operated, serviced and maintained
only by qualified personnel. No responsibility is assumed by Schneider
Electric for any consequences arising out of the use of this material. A
qualified person is one who has skills and knowledge related to the
construction, installation, and operation of electrical equipment and has
received safety training to recognize and avoid the hazards involved. Power
Logic and Schneider Electric are trademarks or registered trademarks of
Schneider Electric in France, the USA and other countries.
- This product must be installed, connected and used in compliance with prevailing standards and/or installation regulations.
- If this product is used in a manner not specified by the manufacturer, the protection provided by the product may be impaired.
- The safety of any system incorporating this product is the responsibility of the assembler/installer of the system. As standards, specifications and designs change from time to time, always ask for confirmation of the information given in this publication.
Schneider Electric
35 rue Joseph Moniker
92500 Ruel Malmaison
France
+ 33 (0) 1 41 29 70 00
www.se.com
Schneider Electric Limited
Stafford Park 5
Telford TF3 3BL
United Kingdom
NVE30698-02
© 2022 Schneider Electric. All rights reserved.
05/2022 NVE30698-02