HELVIA EVOCA 30H 30W Outdoor Horn Speaker Instruction Manual

June 13, 2024
HELVIA

HELVIA EVOCA 30H 30W Outdoor Horn Speaker Instruction Manual
Outdoor Horn Speaker

IMPORTANT SAFETY INSTRUCTIONS

  • Read these instructions
  • Keep these instructions
  • Heed all warning
  • Follow all instructions

Servicing
Do not implement any servicing other than those means described in the manual. Refer all servicing to qualified service personnel only. Only use accessories/attachments or parts recommended by the manufacturer.

UNPACKING

Thank you for purchasing your EVOCA 30H horn speaker. All units have been rigorously tested before leaving the factory. Carefully unpack the carton and check the contents to ensure that all parts are present and in good conditions:

  • 1x EVOCA 30H horn speaker
  • This User manual

If anything damaged during transport, notify the shipper immediately and keeppacking material for inspection. Again, please save its carton and all packingmaterials. If the unit must be returned to the manufacturer, it is important that the unit is returned in the original manufacturer’s packing. Please do not take any action without first contacting us.

Our products are subject to a continuous process of further development. Therefore modifications to the technical features remain subject to change without further notice.

PRODUCT OVERVIEW

HELVIA EVOCA 30H is a compact, lightweight and waterproof horn speaker, designed to provide high efficiency and high sound intelligibility with low distortion.

The built-in line transformer allows the horn to be connected to 70V and 100V constant voltage or low-impedance lines, and select the power through the rotary dial on the rear cover.

The horn can be easily mounted to any wall or ceiling by using the stainless- steel mounting bracket.

Thanks to the weatherproof treated plastic housing, the EVOCA 30H has an IP66 Ingress Protection standard, which make it suitable for outdoor installations.

Features

  • IP66 Protection Type
  • Built-in 30W/15W/7.5W/3.75W Multi-Tap Transformer
  • Adjustable Power Taps with 100V / 70V / 8Ω Modes
  • 105dB SPL
  • High Quality Plastic Housing

PRODUCT APPEARANCE

Dimension

INSTALLATION

Read these instructions carefully before installing and using the product.

When the speaker is installed on ceilings or walls, check that the structure is reliable and the speaker is firmly attached.

Do not use nails, adhesives or other unauthorized devices. Long-term use and vibrations may cause it to fall easily.

Do not listen to sound at a very high level when you are changing the input source (for example, from FM Tuner to CD player). Please be sure the power amplifier is turned off or master volume is at lower level.

The installer is responsible of installation. Please pay attention to install speakers according to local safety regulations.

Speaker Connection

EVOCA 30H horn speaker is equipped with a built-in line transformer with 5 power taps, to better adapt each speaker to the type of line (constant voltage @ 70V, 100V and low-impedance @ 8Ω), the power of the amplifier, and the number of speakers in the system.

When connect the horn to the line, pay attention to wire colors (red = positive; black = ground) and then adjust rotary selector on speaker back. Please refer to the following table.

P osition 70V Power 100V Impedance
1 15W  30W 3330
2 7.5W 15W 6660
3 3.75W 7.5W 1.3k0
4 1.88W 3.75W 2.60
5 OFF OFF OFF
6 30W 80

UNDER-POWERING VS OVER-POWERING

Most speaker damages are caused by amplifiers with too little power (wattage). Overdriven amplifiers clip output waveforms and send distortion to the speakers. Clipping is usually audible; it may vary from a harsh sound to a fuzzy or unclear sound.

If you hear this condition at loud volume levels, turn down the amplifier volume until the distortion is no longer present. Damages caused by operating the speakers at distorted volume levels are no covered by warranty.

NOTE: Total number of speakers multiplied by tap value cannot exceed the output power (in watts) of the 100V or 70V amplifier. If,for instance, you’re going to install 5pcs of EVOCA 30H speaker horn with 30W power (position 1) on a 100V line, you need an amplifierwith at least 5×30=150W RMS power. A good rule of thumb is to use an amplifier with 20% greater power; in this case, an amplifier with 180W or more.

FREQUENCY RESPONSE CHART

NOTE : Frequency chart below shows dB SPL (1W @ 1m).
Graph

SPECIFICATIONS

Rated Power @ 100V 30W / 15W / 7.5W / 3.75W
Rated Power @ 70V 15W / 7.5W / 3.75W / 1.9W
Impedance 80 / 3330 / 6660 / 1.3K0 / 2.6K0
Sensitivity 105 dB (1W/1m)
Frequency Range 400Hz – 10KHz
Protection Level IP66
Color White
Horn Plastic
Diaphragm Phenolic
Magnet Ferric
Mounting bracket Stainless Steel
Mounting holes 3x 07.5mm (0.03 inch) holes with 30mm (1.2 **inch)

space
Horn Size| 0240 x 303mm (09.45 x 11.93
inch)
Net weight| 2,3 kg – 5.07 lbs.
Packing Size| 250 x 250 x 325 mm (98.42 x 98.42 x 127.95 inch)
Gross Weight| 2,6 kg – 7.73 lbs.**

Our products are subject to change. Modifications to technical features remain subject to change without notice

WARRANTY AND SERVICE

All HELVIA® products are covered by warranty according to European regulations (2 years in the case of purchase by private person – B2C; 1 year in the case of purchase by company – B2B). The warranty is valid from the date of purchase by the end user (private individual or company), indicated in the purchase document (receipt in the case of private person; invoice in the case of company). The following cases / components are not covered by the above warranty:

  • All accessories supplied with the product;
  • Improper use;
  • Failure due to wear and tear;
  • Any unauthorized modification of the product by the user or third parties

HELVIA must meet the warranty obligations due to any non-compliant materials or manufacturing defects, by remedying free of charge at HELVIA’s discretion by either repairing or replacing specific parts or the entire equipment. Any defective parts removed by a product in the event of a warranty claim become property of HELVIA. During the warranty period, defective products can be returned to HELVIA retailer or installer with proof of original purchase (receipt or invoice). To avoid damage during transport, please use the original packaging, if available. For more information, visit the website: www.helviasystems.com

WARNING

READ CAREFULLY – only for EU and EEA (Norway, Iceland and Liechtenstein).

This symbol indicates that the product must not be disposed of with household waste, according to the WEEE directive (2202/96/EC and subsequent amendments) and national legislation.

The product must be delivered to a designated waste collection center (e.g. on an authorized one-for-one basis when you buy a new similar product, or to an authorized collection site for recycling waste electrical and electronic equipment). Improper handling of this type of waste can have a negative impact on the environment and human health due to potentially dangerous substances that are generally associatedwith electrical and electronic equipment. At the same time, your cooperation in the properdisposal of this product will contribute to the effective use of natural resources. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, waste authority, approved WEEE scheme or your household waste disposal service.

www.helviasystems.com
This product is imported in the European Union by
Questo prodotto è importato nell’Unione Europea da
Symbol
FRENEXPORT SPA – Via Enzo Ferrari, 10 – 62017 Porto Recanati – Italy
HELVIA® is a registered trademark of FRENEXPORT SPA – Italy
HELVIA® è un marchio di fabbrica registrato di FRENEXPORT SPA – Italia

HELVIA Logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

HELVIA User Manuals

Related Manuals