RYOBI RSI18 18V ONE Soldering Iron Instruction Manual

RYOBI RSI18 18V ONE Soldering Iron

Product Information

The RSI18 soldering iron is designed with a focus on safety, performance, and dependability. It is suitable for soldering circuits, electrical connections, jewelry, stained glass, and other crafts. The product is not intended for any other purposes as using it for operations different from intended could result in a hazardous situation.

Instruction

IMPORTANT!
It is essential that you read the instructions in this manual before assembling, operating, and maintaining the product.

Subject to technical modifications.

Safety, performance, and dependability have been given top priority in the design of your soldering iron.

INTENDED USE

The soldering iron is only intended for soldering circuits, electrical connections, jewellery, stained glass, and other crafts.

Do not use the product for any other purposes. Use of the product for operations different from intended could result in a hazardous situation.

SOLDERING IRON SAFETY WARNINGS

• The product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the product by a person responsible for their safety. Children should be supervised to ensure that they do not play with the product.
• The product is intended for household use only.
• The soldering pen must be placed on its stand when not in use.
• Do not lay a hot soldering iron on its side.
• Do not touch the heated tip of the soldering iron.
• Always assume that the soldering iron tip is hot.
• Use the soldering iron in a well-ventilated area to avoid breathing fumes.
• Do not point the tip of the soldering iron at another person.
• Do not place your hands or fingers near the tip of the soldering iron.
• Never leave the product unattended while it is in the on position.
• The LED indicator will fade on and off slowly for 10 minutes while the tip cools. Do not touch the tip while the LED indicator is solid or fading.
• Always remove the battery pack and allow the soldering tip to cool for a minimum of 30 minutes before removing the tip. Touching a hot soldering tip can result in serious personal injury.
• Always remove the battery pack and allow the product to cool before leaving, transporting or storing. Storing a soldering iron with a hot tip can cause serious burns and/or ignite combustible objects.
• Remove the battery pack from the product before making any adjustments, changing accessories, or storing the product. Such preventive safety measures reduce the risk of starting the product accidentally.
• Do not allow children to use the soldering iron. It is not a toy.
• Do not solder live circuits.
• Do not disassemble the product.
• The soldering iron tip is sharp. Do not touch the tip or allow it to come in contact with anything other than soldering wire and the workpiece material.

ADDITIONAL BATTERY SAFETY WARNINGS

• To reduce the risk of fire, personal injury, and product damage due to a short circuit, never immerse your tool, battery pack or charger in fluid or allow a fluid to flow inside them. Corrosive or conductive fluids, such as seawater, certain industrial chemicals, and bleach or bleach-containing products, etc., can cause a short circuit.

TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance with local and national provisions and regulations.

Follow all special requirements on packaging and labelling when transporting batteries by a third party. Ensure that no batteries can come in contact with other batteries or conductive materials while in transport by protecting exposed connectors with insulating, non-conductive caps or tape.

Do not transport batteries that are cracked or leaking. Check with the forwarding company for further advice.

LED INDICATOR

| ****

Flashing (quickly)

| ****

Tip heating up

---|---|---
| Solid| Tip reached working temperature
| ****

Flashing (slowly)

| ****

Tip cooling

MAINTENANCE

• Use only original accessories and spare parts. Should components need to be replaced which have not been described, please contact an authorized service center. All repairs should be performed by an authorized service center.
• Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, carbon dust, etc.
• Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc., come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which may result in serious personal injury.

SYMBOLS ON THE PRODUCT

Volts

Direct current
Regulatory Compliance Mark (RCM). Product meets applicable regulatory requirements.

Please read the instructions carefully before starting the machine.

Hot surface

Hot surface! Do not touch!

Do not dispose of waste batteries, waste electrical and electronic equipment as unsorted municipal waste.

Waste batteries and waste electrical and electronic equipment must be collected separately.

Waste batteries, waste accumulators, and light sources have to be removed from the equipment.

Check with your local authority or retailer for recycling advice and collection point. According to local regulations, retailers may have an obligation to take back waste batteries and waste electrical and electronic equipment free of charge. Your contribution to the reuse and recycling of waste batteries and waste electrical and electronic equipment helps to reduce the demand of raw materials. Waste batteries, in particular containing lithium, and waste electrical and electronic equipment contain valuable and recyclable materials, which can adversely impact the environment and the human health if not disposed of in an environmentally compatible manner. Delete personal data from waste equipment, if any.

SYMBOLS IN THIS MANUAL

Safety Alert
Note
Parts or accessories sold separately

ORIGINAL INSTRUCTIONS

PRODUCT SPECIFICATIONS

• Soldering iron
• Model  RSI18
• Voltage  18 V
• Power consumption  120 W
• Working temperature 205  – 480°C
• Weight – not incl. battery pack 0.42 kg

REPLACEMENT PARTS

Compatible battery pack (not included)

Imported by:
Techtronic Industries Australia Pty Ltd
31 Gilby Road, Mount Waverley, VIC 3149 Melbourne, Australia
Techtronic Industries N.Z. Limited
Unit C, 70 Business Parade South,
Highblock, Auckland 2013, New Zealand

RYOBI is a trade mark of Ryobi Limited, and is used under license

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>