maono MBS-400 Multimedia Monitor Speaker User Manual
- June 13, 2024
- maono
Table of Contents
maono MBS-400 Multimedia Monitor Speaker
Speaker Introduction
Maono MBS-400 is a 2.0 Multimedia Monitor System with Bluetooth.
Both the active and passive speakers are powered by a 4-inch woofer paired
with a l -in1ch dome tweeter to deliver pure and natural sound. USB-C digital
input, Bluetooth 5.3, RCA, and 1 / 4″ inch inputs are supported for your
convenience.
Product and Accessories
Active speaker X 1
Passive speaker X 1
Power cable X 1
1 /8″to stereo RCA cable X 1
Speaker -to -speaker cable X 1
User manual X 1
Controls and Interfaces
Connection and Usage
-
Connect the Passive speaker to the Active speaker via connection cable. Please ensure the cable is connected to corresponding color interface.
-
Connect the dual RCA jacks to primary speaker audio input.
Please ensure the jack is connected to corresponding color interface. Connect the other end of cable to power. -
Turn on power.
-
Play music.
Bluetooth connection
- Turn on the device.
- Click Bluetooth button, search and find Bluetooth signal named MBS-400 Multimedia to pair. I (If the speaker is not connected within 30 seconds, Bluetooth indicator light will enter energy saving mode. If the speaker Blue tooth signal is not found and connected, the blue indicator light will slowly blink. To enter pairing mode again, please hold Bluetooth for 3 seconds.)
- After Blue tooth connection, please play songs via music APP.
FAQ
•What should I do if only one speaker works?
First of all, please check whether the connection between the speakers is
OK. Next, try to connect speakers to another devices to check if there the
speaker works. If it works, please check the audio device. If it still doesn’t
work, please contact after-sales customer service.
•What should I do If both speakers doesn’t work?
- Please check whether the power plug is inserted properly and the power switch is turned on.
- Please check whether the audio source and connection cable are OK.
- Please check whether the audio signal output is OK.
- Please check whether the volume of the speaker or audio source has been adjusted to the minimum.
- Please disconnect the speaker power and restart it.
Precaution
- Please do not use the speaker near water, and do not immerse the speaker in any liquid or drip any liquid onto the speaker.
- It is strictly forbidden to place any utensils filled with water, such as vases; Or place open flames of any kind, such as lit candles.
- Please do not block the opening of the speaker, and do not stuff objects into the vents or slots of the speaker, please leave enough space around the speakers for good ventilation (recommend 5CM and above).
- Please do not place near any heat sources (such as radiators, heating equipment, stoves or other heat equipment, including amplifiers).
- There is danger of electricity in this speaker, please do not open the back cover to avoid electric shock and affect the warranty.
- Make sure the power cord is not stepped on or pinched, especially at the power cord plug and the device on the connection point.
- Be sure to connect the speaker to the low-level audio output jack of your computer or audio device.
- In the event of a thunderstorm, for safety, please unplug the power cord from the power outlet, and shut down the computer.
- When not in use for a long time, please unplug the power cord of this device from the power outlet.
- No matter the equipment is damaged for any reason, it must be repaired by professional maintenance personnel in time (such as damaged plug, liquid spilled or objects dropped into the device, the device has been exposed to rain or moisture, does not work or has been dropped).
- Before wiping the speaker with a dry cloth, please disconnect the speaker’s audio cable from the computer, unplug and unplug the power cord from the electrical outlet.
- Please adjust the speaker to a suitable volume to avoid damage to hearing and equipment.
- This product uses the power plug as the disconnecting device. When using it, the plug should be in easily disconnected position.
Customer Support
Company: Qing UG (haftungsbeschrankt)
Address: Undinestr. 7,12203 Berlin Germany
Tell: 004917662179550
E-mail : pmdheinrich@gmail.com
Company: CET PRODUCT SERVICE LTD.
Address: Chase Business Center, 39-41 Chase Side, London N14 5BP United
Kingdom
Tell:+ 447419325266
E-mail : info.cetservice@gmail.com
Final Clause: Information and data contained in this manual are subjected to change without notice in advance.
Technical support
Support@maono.com
www.maono.com