behringer SF300 Super Fuzz Pedal Reverb Instructions

behringer SF300 Super Fuzz Pedal Reverb

Product Information

• The BEHRINGER SUPER FUZZ SF300 is an effects pedal designed for electric guitars. It is specifically designed to recreate the famous fuzz tones of the ’60s and ’70s. This pedal does not have an on/off switch and is activated as soon as you insert the plug into the IN connector.
• The SERIAL NUMBER of the pedal can be found on the underside.
• For warranty terms, please refer to the BEHRINGER website.

Specifications

• In Connector Impedance: 1/4 TS 500 k
• Out Connector Impedance: 1/4 TS 1 k
• Power supply: 9 V, 100 mA regulated
• Power connector: BEHRINGER PSU-SB (2 mm DC jack, negative center)
• Battery: 9 V type 6LR61
• Power consumption: 30 mA
• Dimensions (H x W x D): approx. 54 mm (2 1/8) x 70 mm (2 3/4) x 123 mm (4 4/5)
• Weight: approx. 0.33 kg (0.73 lbs)
  BEHRINGER constantly strives to maintain high professional standards and may make modifications to existing products without prior notice. Therefore, specifications and appearance may differ from those listed or shown.

Product Usage Instructions

• To activate the BEHRINGER SUPER FUZZ SF300, follow these steps:
• 1. Insert the plug into the IN connector.
  2. The pedal is now on and ready to use.
• When the pedal is not in use, it is recommended to remove the plug from the IN connector to extend the battery life.
• Ensure that the pedal is not used near water or heat sources. Only use authorized attachments and accessories with the pedal. Do not attempt to service the product yourself if there is any damage to the power supply cord or plug. Contact qualified servicing personnel for repairs.

Thank you for showing your confidence in us by purchasing the BEHRINGER SUPER FUZZ SF300. This effects pedal is ideally suited for electric guitars and recreates the whole variety of famous fuzz tones of the ’60s and ’70s.

CONTROLS

1. The LEVEL control adjusts the output level.
2. The TREBLE control allows you to boost/cut the high-frequency range.
3. The BASS control allows you to boost/cut the low-frequency range.
4. The GAIN control adjusts the gain for more distorted sounds.
5. The MODE switch lets you choose between 3 effect modes.
6. FUZZ 1: Basic fuzz sound with emphasis on the midrange.
7. FUZZ 2: Full-bodied fuzz sound with scooped mids and sharp harmonics.
8. BOOST: The LEVEL control is inactive and the GAIN control adjusts the boost.
9. The ON/BATT LED illuminates when the effect is activated. It also serves as a battery level indicator.
10. Use the footswitch to activate/deactivate the effect.
11. Use this 1/4″ TS IN connector to plug in the instrument cable.
12. The 1/4″ TS OUT connector sends the signal to your amp.
    • Use the DC IN connection to plug in a 9 V power supply (not included).
    • The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery (not included), press the hinges with a ballpoint pen and remove the pedal cover. Be careful not to scratch the unit.
    • The SERIAL NUMBER is located at the underside.

WARRANTY

For our current warranty terms, please refer to our website at http://www.behringer.com.

SPECIFICATIONS

• In

  • Connector 1/4″ TS
  • Impedance 500 kΩ

• Out

  • Connector 1/4″ TS
  • Impedance 1 kΩ

• Power supply 9 V , 100 mA regulated
  BEHRINGER PSU-SB

  • USA/Canada 120 V~, 60 Hz
  • Europe/U.K./Australia 230 V~, 50 Hz
  • China 220 V~, 50 Hz
  • Korea 220 V~, 60 Hz
  • Japan 100 V~, 50/60 Hz

• Power connector 2 mm DC jack, negative center

• Battery 9 V type 6LR61

• Power consumption 30 mA

• Dimensions (H x W x D) approx. 54 mm (2 1/8″) x 70 mm (2 3/4″) x 123 mm (4 4/5″)

• Weight approx. 0.33 kg (0.73 lbs)
  BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may therefore differ from those listed or shown.

SAFETY INSTRUCTIONS

Do not use near water, or install near heat sources. Use only authorized attachments/accessories. Do not service product yourself. Contact our qualified servicing personnel for servicing or repairs, especially when power supply cord or plug is damaged.

ABOUT COMPANY

Technical specifications and appearance subject to change without notice. The information contained herein is correct at the time of printing. BEHRINGER accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. Colours and specification may vary slightly from product. Products are sold through our authorised dealers only. Distributors and dealers are not agents of BEHRINGER and have absolutely no authority to bind BEHRINGER by any express or implied undertaking or representation. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER International GmbH. BEHRINGER, the BEHRINGER logo and JUST LISTEN are trademarks of BEHRINGER. ALL RIGHTS RESERVED. © 2006 BEHRINGER International GmbH, Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Münchheide II, Germany. Tel. +49 2154 9206 0, Fax +49 2154 9206 490

References

• Behringer | Home
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>