PHILIPS 3DP Series Pendants Original Series Instruction Manual
- June 4, 2024
- Philips
Table of Contents
3DP Series Pendants Original Series
Instruction Manual
3DP Series Pendants Original Series
Read and Understand these instructions before proceeding.
This fixture is intended for installation in accordance with the National
Electrical Code and Local Regulations. To assure full compliance with local
codes and regulations, check with your local electrical inspector before
installation. To prevent electrical shock, turn off electricity at the fuse
box before proceeding. Allow mixture to cool before handling.
Retain these instructions for maintenance reference.
Pendant Surface-Mounted Canopy (PS)
**** THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE
APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND
OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
In the luminaire, only LED-based lamps shall be used.
In case a track mounting system is used, please follow the instructions
included in the adapter kit box.
Clean with a dry cloth
ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE DEVICES
© 2020 Signify Holding.
All rights reserved. This document may be subject to change. No representation
or warranty as to the accuracy or
completeness of the information included herein is given and liability for any
action in reliance thereon is disclaimed.
All trademarks are owned by Signify Holding or the representative owners.
Signify North America Corporation
200 Franklin Square Drive.
Sommerset. NJ 08873
Telephone 855-486-2216| Signify Canada
Ltd.
281 Hillmouth Road
Markham. ON. Canada L6C 2S3
Telephone : 800-668-9008
---|---
Signify Holding.
The Netherlands
Printed in The United States of America
Data subject to change without notice
Keep for future reference:
www.philips.com/lighting
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>