Gladiator GarageWorks GALG362DPG Hammered Granite Silver Tread Instruction Manual
- June 13, 2024
- Gladiator GarageWorks
Table of Contents
Gladiator GarageWorks GALG362DPG Hammered Granite Silver Tread
Product Specifications
- Model Options: GALG362DPG – Hammered Granite / Silver Tread, GALG362DPR – Hammered Granite / Red Tread, GALG362DPW – Hammered White / Gray Slate
- Modelo Options: GALG362DPG – Granito Martillado/Plateado Huella, GALG362DPR – Granito Martillado/Rojo Huella, GALG362DPW – Blanco Martillado / Pizarra Gris
- Product Name: PREMIER WELDED – 84 TALL CABINET
- Maximum Weight Limit: 400 lbs (181 kg) for each shelf, not to exceed 2000 lbs (907 kg) for the cabinet
- Hanging Rod Weight Limit: 50 lbs (23 kg)
- Dimensions: 24″ (61 cm) x 36″ (91.4 cm) x 84″ (213.4 cm)
Product Usage Instructions
Cabinet Safety
Your safety and the safety of others are crucial. Always read and follow
all safety messages provided in the manual and on the appliance. The safety
alert symbol indicates potential hazards that can cause harm or injury. Pay
attention to all safety messages.
Dimensions
The dimensions of the cabinet are as follows: A: 24″ (61 cm), B: 36″ (91.4
cm), C: 84″ (213.4 cm).
Parts Supplied
The parts supplied include M6 x 16 mm hex bolts (20) and leveling legs (4).
Assembly Instructions
- Tools Needed: 10 mm Wrench (Included)
- Parts for Cabinet: Corner bracket (4), Front kickplate (1), Side kickplate (2), Hanging Rod (1), Full-width shelves (4), Leveling leg (4), Key (2), M6 x 16 mm hex bolt (20)
- Install the leveling legs and corner brackets ensuring to follow weight guidelines.
- Unpack the cabinet carefully and verify contents.
- Assemble the cabinet according to the provided instructions using the required tools.
Cabinet Use Requirements
- Intended for use in a garage.
- Follow weight limits: Maximum weight limit is 400 lbs (181 kg) for each shelf, not to exceed 2000 lbs (907 kg) for the cabinet. Hanging rod not to exceed 50 lbs (23 kg).
Frequently Asked Questions (FAQ)
-
Q: Can I exceed the maximum weight limit for the cabinet?
A: No, it is essential to adhere to the specified weight limits for each shelf and the overall cabinet to prevent damage or injury. -
Q: What tools are needed for assembly?
A: You will require a 10 mm wrench which is included in the package. -
Q: Can I assemble the cabinet alone?
A: It is recommended to have two or more people present during assembly to prevent any injuries due to excessive weight.
Model:
GALG362DPG – Hammered Granite / Silver Tread GALG362DPR – Hammered Granite /
Red Tread GALG362DPW – Hammered White / Gray Slate
PREMIER WELDED – 84″ TALL CABINET
Assembly Instructions
CABINET SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and
others.
All safety messages will follow the safety alert symbol and either the word
“DANGER” or “WARNING.” These words mean:
DANGER
You can be killed or seriously injured if you don’t immediately follow
instructions.
WARNING
You can be killed or seriously injured if you don’t follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.
DIMENSIONS
| Callouts | Dimensions |
|---|---|
| A | 24″ (61 cm) |
| B | 36″ (91.4 cm) |
| C | 84″ (213.4 cm) |
PARTS SUPPLIED
| Callouts | Description | Quantity |
|---|---|---|
| F1 | M6 x 16 mm hex bolts | 20 |
| F2 | Leveling Legs | 4 |
ASSEMBLY INSTRUCTIONS
Tools and Parts
Gather the required tools and parts before starting installation. Tools
Needed:
- 10 mm Wrench (Included)
Parts for Cabinet
- Corner bracket (4)
- Front kickplate (1)
- Side kickplate (2)
- Hanging Rod (1)
- Full-width shelves (4)
- Leveling leg (4)
- Key (2)
- M6 x 16 mm hex bolt (20)
Cabinet Use Requirements
- Intended for use in a garage.
- Maximum weight limit is 400 lbs (181 kg) for each shelf, not to exceed 2000 lbs (907 kg) for the cabinet.
- Hanging rod not to exceed 50 lbs (23 kg).
Unpack the Cabinet
- Remove the keys from the cabinet.
- Open the cabinet door.
- Remove and verify the contents. See “Parts for Cabinet” for your model.
- Dispose or recycle all packaging materials.
NOTE : Keep the outer carton layer. It is needed to cushion the cabinet during leveling leg and corner bracket assembly.
Install the Leveling Legs and Corner Brackets
WARNING
Excessive Weight Hazard
Use two or more people to move, assemble or install cabinet.
Failure to do so can result in back or other injury.
-
Close and lock the cabinet doors.
-
Using two or more people, place the cabinet on its back using the outer carton layer to cushion the cabinet.
-
Insert 4 hex bolts (F1) through each corner bracket and into the cabinet. Do not tighten the hex bolts completely if adding the optional kickplates.
NOTE : If adding the optional kickplates, do not completely tighten the hex bolts until all 3 kickplates are in place. -
Install the leveling legs (F2) to the corner brackets.
NOTE: If you need to open the cabinet doors during installation of leveling legs and corner bracket assembly, open them slowly and do not put any weight on the open doors. This avoids damage to the hinges.
Install the Kickplates (Optional)
NOTE: Kickplate installation is optional on the 84″ Tall Cabinet.
-
Position the front & side kickplates to the corner brackets and align kickplate end holes with the holes in corner brackets.
-
Insert the four hex bolts (F1) through kickplate end holes into corner brackets.
NOTE : The side kickplates will be on top of the front kickplate flanges. -
Completely tighten all corner bracket hex bolts.
-
Return the cabinet to its upright position. Unlock door.
Install the Hanging Rod
The cabinet has pre-installed closet rails on the side panels which are suitable for a hanging rod.
- Unlock and open the cabinet doors.
- Place the hanging rod into the closet rail openings and slide down and into position.
Adjust Shelves
-
Remove the shelf clips from their shipping position on the sides of the cabinet. Working from the inside of the cabinet and using a blunt tool, push out the white plastic shelf clips.
-
Discard the clips.
-
Lift up on the underside of the shelf until the shelf tabs are free of the cabinet slots.
-
Tilt the shelf up to reposition it within the cabinet or to remove it from the cabinet.
NOTE : Plan your shelf heights and install shelves starting from the bottom. The shelves are supported by the metal tabs on side walls of the cabinet. -
Determine the placement of the shelves.
-
Tilt the shelf so that one end is higher than the other
-
Insert the shelf into the cabinet so that the higher end is directly above the desired slots and push the shelf down in place behind the side slots.
-
Raise the lower end so it is directly above the desired slots and push the shelf down.
NOTE : A shelf must be located in the center position for the cabinet lock to function correctly. Make sure the shelf tabs are in place behind all the slots, as shown. -
Repeat this process for the remaining shelves.
Level the Cabinet
- Place the cabinet in the desired location.
- Level the cabinet by adjusting the leveling legs.
Adjust Doors
The cabinets are designed with adjustable doors.
- Check to see whether the doors need adjusting. It is more often the left door that will need to be aligned.
- Using a Phillips screwdriver, loosen all screws attaching the hinge to the cabinet.
- Adjust door to the desired height.
- Tighten the screws.
WEIGHT CAPACITY
ACCESSORIES
To order accessories, call
1-866-342-4089 and ask for the
accessory part number listed below or contact your authorized Gladiator® brand
dealer. In Canada, call 1-800-807-6777.
Mounting Bracket Kit – Allows the cabinet to be mounted on
Gladiator® GearWall® panels or GearTrack® channels.
Order Part # GABK301PRS
WARRANTY
For warranty information
In the U.S.A. call 1-866-342-4089 or
visit our website at
www.gladiatorgarageworks.com
In Canada call 1-800-807-6777 or visit
our website at
www.gladiatorgarageworks.ca