sensata KP2 NA Smart Witness User Guide

: June 9, 2024
: Sensata

Table of Contents

Installations Instructions
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**sensata KP2 NA Smart Witness User Guide

**

Installations Instructions

Standard Kit (w/Optional OBDII Data Adapter Cable)

Product Overawe

A. KP2 Camera, Mounting Bracket and Attached Bracket Power Cable
B. 3M™ Adhesive Tape
C. Alcohol Pads
D. Clips
E. Torx® Wrench
F. Optional: OBDII Data Adapter Cable (Connects to A) – Sold Separately

Review the package contents.
Scan the QR code inside the box for a detailed installation video, spec sheet and user guide.
Watch the installation video. Refer to proper camera installation guidelines **here.

**

Use wipe to clean the window. Allow time to dry. To determine compliant device placement, check local regulations.
Remove backing. Press evenly to ensure the mounting bracket’s adhesive is flush against the glass. Hold to window for 30 seconds.
Remove adhesive and apply cable clips to windshield. Slide the bracket power cable into clips.
Tuck cable behind weather stripping, and push stripping in to secure it.
At the end of the bracket cable (A), connect the terminal to the smaller end of the adapter cable (F).
Plug the end of the OBDII adapter cable into your vehicle’s OBDII port.
Turn on your vehicle. Check that both blue and green lights remain on after 5 minutes. If not, an error occurred.
Scan the QR code above, and download the iOS or Android KP2 installation app
. Open the KP2 installation app, and scan the IMEI code on the box’s label.
. Follow the device configuration prompts to complete the installation app.
Ensure the IMEI code in the app matches your device’s IMEI. If there isn’t a match, tap No and contact Smart Witness Support. If there’s a match, tap Yes to continue.
. Read the instructions to understand more about your vehicle’s “Horizon” and “Hood” lines.
Tap Show Me How for a brief video walk-through of the device attachment process
Select your KP2 camera configuration. Choose the driver’s side of the vehicle. Tap Next to set your vehicle’s “Horizon” and “Hood” lines.
If you adjust either camera, tap Refresh Images to update road- and driver-facing camera images. Use the arrows to adjust your vehicle’s “Horizon” and “Hood” lines. Ensure your “Hood” line is in the bottom one-fourth of your image. Scroll down and tap Next to save the “Horizon” and “Hood” lines.
. Choose preferences for in-cabin alerts, an alert’s volume level or activation of different ADAS and DSM events.
If you’re unaware of a setting’s function, tap the info icon to learn more. Pay close attention to Camera Height. Enter an even interval value (e.g., 190 cm), not an odd interval value (e.g., 205 cm, 213 cm).
After you’ve made changes and activated the appropriate features, tap Confirm to save your configuration.
On the home screen, you’ll see a success message validating your saved configuration.