LuxenHome WHAP1781 6 Foot Pencil Slim Artificial Pink Christmas Tree Instruction Manual

LuxenHome WHAP1781 6 Foot Pencil Slim Artificial Pink Christmas Tree

Product Information

Item #: WHAP1781

Product Name: 6Ft Pencil Slim Artificial Pink Christmas Tree

This product is a 6-foot tall pencil slim artificial pink Christmas tree designed for indoor display only. It comes with three sections – the tree top (A), tree middle (B), and tree bottom (C). The tree stand is included for easy assembly. The tree may utilize light sets that are marked for indoor and outdoor use, but the tree itself should only be used indoors. The packaging includes all necessary parts to assemble the tree.

Product Usage Instructions

Before You Start:

• Decide on an appropriate location for your product.
• Read the assembly and instruction procedure carefully.
• Retain the instructions for future use and save the carton for storing your tree.

Assembly and Instruction Procedure (no tools required for assembly):

Note: Remove all packaging (i.e., cardboard or plastic) before beginning.

Assemble Tree Stand:

• Pull apart the legs of the stand to form an X shape.
• Lock the stand in position with the single eye bolt inside the metal tab.
• Screw three eye bolts through the hole on the inside metal tab.

Assemble the Tree:

• Insert the bottom section (C) of the tree into the assembled stand.
• Ensure the tree pole is firmly inserted into the stand and turn the screws to secure it.
• Stand the tree upright and straighten it by adjusting the tree stand screws.
• Tighten the screws to secure the bottom tree section.
• Insert the middle section (B) into the bottom section (C).
• Lastly, insert the tree top (A) into the middle section (B).

Shape the Tree:

• Start shaping the branches from the bottom of the tree to the top.
• Begin with the tree tips farthest away from the center pole.
• Reshape branches as needed and upsweep the branch tips for a uniform look.

Note: Once you have shaped the tree, step back to look for any gaps and make further adjustments if necessary.

Troubleshooting:

• If the tree is not straight, try adjusting the screws in the tree stand while it is in a vertical position.
• If adjusting the screws does not resolve the issue, please contact customer service for assistance. Do not disassemble the tree on your own.

Important Safety Information:

• Keep the tree away from open flames or heat sources.
• Ensure the tree is stable enough to hold upright.
• Do not install near pools, fountains, tubs, sinks, or areas of standing water where the tree may fall or blow into.
• This product is for decoration use only and should not be used by children as a toy. Keep out of reach of small children.

Instruction Manual
Please save this manual for future reference

Thank you for purchasing this LuxenHöme product. This product has been manufactured with the highest standards of safety and quality.

PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.
Unpack all parts from Styrofoam and bubble wrap inside the carton to ensure there are no missing or damaged parts. If any parts are missing or damaged, do not attempt to assemble or use the product.

CARTON CONTENTS

Before You Start

1. Decide on an appropriate location for your product, please read assembly and Instruction procedure carefully.
   Note: This tree may utilize light sets that are marked for indoor and outdoor use, but the artificial tree is for indoor display only.

2. Retain the instructions for future use and save the carton for storing your tree.

Assembly and Instruction Procedure

(no tools required for assembly):

Remove all packaging (i.e., cardboard or plastic) before beginning.

1. Assemble Tree Stand:
   First step is to assemble the metal stand for the tree. Pull apart the legs of the stand so that they have an “X” shape. Lock the stand in position with the single eye bolt inside the metal tab.
   Screw three eye bolts through the hole on the inside metal tab.

2. Assemble the Tree:
   Carefully insert the bottom of the tree section (C) into the assembled stand. Make sure the tree pole is firmlyinserted into the stand and turn the screws, so they touch the tree “trunk”. Stand the tree upright and straighten by adjusting the tree stand screws in or out. Once the bottom tree section is straight, tighten the screws tosecure it.
   Insert the middle section (B) into the bottom section (C). And lastly, insert the tree top (A) into the middle section (B).

3. Shape the Tree:
   Begin to shape the branches from the bottom of the tree to the top. Start with the tree tips farthest away from the center pole.
   After shaping the tree, step back to look for any gaps. Reshape branches as needed. You can upsweep the branch tips for uniform look. Once you have the tree the way you want it, you can start decorating!

Warnings:

1. Risk of Fire and Electric Shock – please follow instructions and warnings on string lights if adding lights to trees.
2. Do not place near fireplaces, candles, outdoor heaters, or other similar sources of heat. This item is not flame retardant.
3. Do not install near pools, fountains, tubs, sinks, or other areas of standing water that the tree may fall or blow into.
4. Make sure final assembly stable enough to hold the tree upright.
5. This product is for decoration use only. Not to be used by children as a toy. Keep out of reach of small children.

Troubleshooting:

1. Tree is not straight: Try adjusting the screws in the tree stand to adjust the tree. It is better if the tree is in the vertical position when adjusting.
   Note: If this does not resolve the issue with the tree, please do not disassemble the tree yet. Please contact customer service for assistance.

Storage:

1. Remove all decorations.
2. Starting from the top, carefully unassembled the tree sections. Press the tree tips back up against the pole.
3. Place the branch sections back into the carton, putting the longest one on the bottom.
4. Store the product in a cool, dry location protected from sunlight where the temperature does not exceed 35˚C (95˚F).

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>