ALLEN HEATH XONE-96 Audio Firmware User Manual
- June 13, 2024
- ALLEN HEATH
Table of Contents
XONE-96 Audio Firmware
v1.0.2 MAINTENANCE RELEASE
XONE:96 AUDIO FIRMWARE v1.0.2
This maintenance release implements reconfiguration of the DAC codec for your
XONE:96 This bundle includes v1.0.2 Audio Firmware for Windows PC
**PLEASE FOLLOW INSTRUCTIONS FOR INSTALLATION CAREFULLY
**
Xone Product XONE:96
Audio Firmware v1.0.2 PC
Device Drivers v4330
[Xone96AudioFirmware1.0.2.bin]
| Operating System: | Compatible | Support Active |
|---|---|---|
| Microsoft Windows10 | ||
| Microsoft Windows8 | ||
| Microsoft Windows7 |
see p.3 for software changelog
Installing XONE:96 Audio Firmware
! IMPORTANT: Ensure current ASIO* compatible allen-
heath.com/media/X96_SRN_4330_1.pdf on the host PC
! Ensure you download & install the correct Device Software for your operating
system;
- Go to www.allen-heath.com/ahproducts/xone96
- Click PC DEVICE SOFTWARE
- Download the ‘current’ Audio Firmware bundle: X96_AFW102_PC.zip
- Move the X96_AFW102_PC.zip to your system desktop and extract the Audio Firmware file; Xone96AudioFirmware1.0.2.bin Connect the PC to the mixer’s USB 1 port and power the Xone:96 ON
! IMPORTANT: the host must connect to the USB 1 port during
installation.
If the PC is connected to USB 2 the installer application will not find the
Xone:96
Check that the mixer is correctly connected and visible via the PC’s Sound
dialogue;
Search > Sound (Control Panel) to open the dialogue
And that the Xone:96 mixer is not
selected for sound playback and recording during the install.
XONE:96 AUDIO FIRMWARE v1.0.2
PLEASE FOLLOW INSTALL & UPDATE INSTRUCTIONS CAREFULLY
Xone Product XONE:96
Audio Firmware v1.0.2 PC
Device Driver v4330
[Xone96AudioFirmware1.0.2.bin] Installing XONE:96 Audio Firmware continued…
Close all Audio and MIDI applications before running the install.
Browse to the install directory of the Device Driver;
– the default is:
(C):\Program Files\Allen & Heath\XONE USB Driver\XONE 96\W10_x64 Select the
Xone96Dfu.exe application.
Click Open to run the installer
The Audio Firmware currently installed is displayed next to Current Firmware:
If Current Firmware displays v1.0.2;
– the XONE:96 is up to date
! – you do not need to run the install.
Click EXIT to close the application.
Power-cycle the Xone:96 mixer (turn OFF/ ON) before further use.
If Current Firmware displays v1.0.0;
Click the Browse tab in the installer application
and navigate to the desktop
Select the Xone96AudioFirmware1.0.2.bin file and click Open
Click the Start tab to install the new Audio Firmware
Installation takes a few seconds during which various messages are displayed.
After the installation is complete, click EXIT to close the installer
application.
Power-cycle the Xone:96 mixer (turn OFF/ ON) before further use
The Audio Firmware update is now complete.
Software Changelog
Xone Product : XONE:96
Audio Firmware v1.0.2
Operating System: MS Windows [PC] [Xone96AudioFirmware1.0.2.bin] v1.0.2
Audio Firmware maintenance update implementing DAC codec reconfiguration
XONE96-25 FIXED: de-emphasis filter status @ 44.1kHz / 48kHz sample rates
If you experience a problem during installation, please contact A&H Product
Support: http://support.allen-heath.com
X96 WDSRN_ Issue 1
X96_AFW102_PC 11/18
- ASIO is a trademark and software of Steinberg Media Technologies GmbH
References
- Product Support - Allen & Heath
- Xone:96 - Allen & Heath
- Log in with Atlassian account
- Manual-Hub.com – Free PDF manuals!