JRGK WS-858 Wireless Bluetooth Karaoke Handheld Microphone User Guide

JRGK WS-858 Wireless Bluetooth Karaoke Handheld Microphone

Structure diagram

Product interface description

Instructions for use Bluetooth wireless karaoke

1. Long press the power button to turn it on, and the blue light is on (normal)
2. Teeth connection: turn on the Bluetooth scan of the mobile phone, search to858, and then pair the connection. After the connection, you can hear the prompt sound that the phone’s karaoke is issued and the teeth have been connected ( Note: Please enter 0000 if the password is required in the pairing process)
3. Adjust the volume of playing songs, and adjust the MIC volume and reverb to match In position, start a karaoke
   Note: After connecting with the mobile phone once, 858K Gobo has a memory function, after turning on the machine Can automatically connect the last connected mobile phone, if you need to disconnect, you can disconnect the Bluetooth setting of the mobile phone. If you only want to listen to music, please set it Turn the microphone to minimum volume

Routine conditions and treatment

• The fault phenomenon
• The charging indicator is off
• The microphone is dead
• The microphone has no reverberation effect
• There is a cacophony of singing
• The tone is broken during Bluetooth playback
• Bluetooth sound is small or silent
• Bluetooth failed to connect
• Bluetooth playback music distortion
• Bluetooth failed to connect, iPhone singing bar and other software
• Duets don’t pair
• The cause of the problem
• The battery is low or the charging cable is not properly connected
• Whether the device is turned on or the audio volume is not turned on
• The reverb switch is not properly set
• Environmental noise, cell phone signal interference, karaoke software Settings problems
• The is too far, and the mabile phone and microphone have obstructed both distances
• Turn down the volume of your phone, or the volume of your source music files
• The Bluetooth distance is too far and there are obstacles. Another mobile phone has been connected
• The volume is too high and the battery is low
• Apple 10S does not support Bluetooth output
• Whether a Bluetooth device is connected
• Elimination method
• Charging check connector or charging cabie
• Turn on or adjust the accompaniment volume
• Adjust reverb volume to appropriate position
• Use it in a quiet place, WIden the distance from the phone, and adjust the sound of karaoke software
• Stay close to the phone and avoid obstacles
• Turn up the volume of mobile media, download oud music, and adjust the volume of music to the right position
• Close to the phone avoid obstacles, disconnect the connected phone
• Turn down the volume of media on your phone and charge the battery
• The proposal uses the whole nation K soon ing the software such as try
• Turn off the device’s Bluetooth and pair it up

Charging instructions

1. when the battery voltage is too low, the product will automatically shut down
2. Use the USB charging cable of the accessory., connect the USB port of the standard phone charger to charge At this time, the red light below the show is charging
3. Normal charging 3-8 hours, charging finished, the red light automatically off
4. Normal continuous use time :2.5-5 hours

Product technical parameters

• pick-up: capacitor type
• Output power :3″5W
• Frequency range: 100HZ-10khz
• Maximum loud pressure level :>90dB1 KHZ THD<1%
• Reverb mode: Echo sound reverberation
• The power supply mode: Built-in polymer lithium battery
• Battery capacity:800 mah
• Charging power supply:DC5V

After-sales service description

Dear users, thank you very much for using our products, in order to ensure In your interest, the distributor and the company shall be responsible for the repair and replacement of the products Return (hereinafter referred to as: Sanbao) Responsibilities and obligations, please read the following items:
Product warranty card” is our company to provide free after-sales service
during the warranty period of its products
Necessary proof of service:

1. According to the principle of Who sells who is responsible for three guarantees”, if the product has quality problems, the” Product warranty card and dealer contact, by the dealer to provide services to customers, I public The company will provide service support to dealers;
2. The following situations do not enjoy the three-guarantee service:
3.  Exceeding the period of three guarantees
4. Damage caused by failure to use, maintain or keep the product in accordance with the instructions
5. damage not caused by disassembly by the repairman who undertakes three packs
6. No Product Warranty Card
7. The content on the Product Warranty Card is inconsistent with the product’s physical identification or altered
8. Damage caused by force majeure
9. artificially broken or damaged
10. The company reserves the right of interpreting of the above matters

Product warranty card

Product Model:
Purchase Date:
Agent:
Invoice Date:
Customer name
Zipcode:

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interterence in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.

RF Exposure Information
The device has been evaluated to meet the general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>