eBay D501-BSD 5 Inch Car Play Display User Manual

June 13, 2024
ebay

eBay D501-BSD 5 Inch Car Play Display User Manual
eBay D501-BSD 5 Inch Car Play Display

Product overview

D501-BSD collects vehicle image through Front/Back cameras, and transmits it to the smart monitor in real time. Driver can intuitively view the obstacles & pedestrians, reducing accidents, scratches, collisions, and collapses.

D501-BSD can also record 4k ultra-clear video, BSD pedestrian detection and waring in advance.
Product Overview

Product composition list

Name Graphic s        Instructions Nunber
The host ·inch HD display (854’480)/ touch 1 Bluet0Oth ANIFI/ audio Output
/41< HD video; Type-C interface power supply 1
The power cord Type-C power cord/ 7V•32V/3A current / integrated
cable/cigar lighter to take power 1
Pull back camera AHD FHD (1080Py4PIN BMW head Optional
Pull the headphone extension cord Pull back headphone cable /6m /2.5mm
headphone +4PIN BMW head/double shield/ with reverse cable Optional
Monitor base To support the display and fix it on the center console 1
SD card(optional) 32G Classl 0 SD card 1
Sucker The display can be sucked to the windshield of the car
Camera extension cord Rear view / I Om/BMW head/one male and one female /
dual shielding /4 cores 1

Product description

Project| Function
introduction
| Performance Indicators
---|---|---
System| Language| Simplified Chinese /TraditionaU Chinese /English/ Russian- Spanish /French /German /Japanese /Korean /Italian/Portuguese
Interface| Graphical menu operation
Mode of operation| Touch
Video recording| Recording video resolution| 4K ultra-clear picture recording, 3840’2160
Video display| Real-time display| 5-inch high-definition IPS screen, 854’480
The screen saver| Can be set to 1 minute/5 minutes/off
Reverse display| Reverse display| Automatically switches to the rear view
Astem line adjustment| Adjust the reversing line for various models
Smart Internet| Wifi| Supports Apple CarPlay. Android Auto. WiFi video
Bluetooth| Support Bluetooth music playback
Audio emission| Support local speaker playback, Carplay/Auto, FM. AUX
The video store| SD card| CLASSIO U1: 32GB minimum and 256GB maximum
Audio part| The microphone| Support microphone recording, menu can be set to tum off
Voice control| Support voice control, menu can be set to turn off
Power part| The power input| The step-down line supports a wide voltage range of 7-32V, and has car-grade anti-surge, anti-reverse connection and other power protection.
Power consumption| Two-way video| Less than 10W (screen display. 2-channel camera recording)
Other| Working temperature| -4-149°F
Camera mirroring| The camera supports mirror display, and the menu can be set

SD card specifications

The SD card can be used to store movies and music, which can be played after being inserted into the machine. Please choose a big brand SD card such as SanDisk, Kingston, Toshiba, Samsung. The speed certification must be able to reach at least Class 10,

Wiring Instructions

Wiring Instructions

Port Instructions
Type-C interface  Monitor power supply interface

The cigarette lighter takes power directly

Camera installation

Locate the drilling hole, find the appropriate installation position in the license plate attachment, mark it with a pen and then drill the appropriate size of the screw hole. Fix the camera to the rear of the car with screws, the reversing trigger wire (red thin wire) needs to be connected to the positive pole of the reversing light, and finally use the camera extension cable to connect to the monitor.

(This is not necessary if you choose the version without the reversing camera.)
Camera Installation

Interface specification

  1. Settings: Set various functions of the system
  2. Brightness button:
  3. Volume button: click to adjust the volume lick to adjust the screen brightness
  4. Camera shortcut button: click to view the camera screen 5 Camera button: Click to view the camera screen 6 Apple Car Play: iPhone-specific interface
  5. Audio output: Click to select the audio playback mode
  6. Android Auto: dedicated interface for Android phones

A. Apple CarPlay

As shown in the figure, click the [Apple Carp lay] button, and then select the [Apple Carp lay] option, first tum on the phone’s Wi-Fi and Bluetooth, as shown in the figure above. Bluetooth . will be turned on automatically and the name will be T86-XXXXXX. Once the Bluetooth connection s successful, Apple Carpal can be connected. (When the machine is powered on, it will try to automatically connect to the last connected phone)

(The Apple CarPlay option only supports Apple mobile phones, and it can be disconnected by turning off the WiFi button of the mobile phone)
Apple CarPlay 

B. Android Auto

As shown in the picture, click the [Android Auto] button, and then select the [Android Auto] option, first tur on the phone’s Wi-Fi and Bluetooth, as shown in the picture above. Bluetooth. will be turned on automatically and the name will be T86-XXXXXX. Once the Bluetooth is successfully connected, you can connect to Android Auto. (When the machine is powered on, it wil ry to automatically connect to the last connected phone)

(The wireless Android automatic option only supports Android phones, turn off the WiFi button to disconnect)
Android Auto

C. Bluetooth Music

Bluetooth Music

First select the [Bluetooth Music] option, and then turn on the Bluetooth of the mobile phone. Connect the Bluetooth T86-XXXXXX of the smart screen. After the connection is successful, you can start playing music.

The buttons correspond to
*Previous Song”, “Play/Pause” and “Next Song” respectively

Click the lyrics button [ ] to display the lyrics
Click the volume button [ ] to adjust the volume

D. WiFi video
Wi-Fi Video 

As shown in the figure above, fist scan the QR code to download the corresponding APP.

After downloading, open the APP, and follow the APP prompts to connect to the WIFI of the machine. WIFI name: T86-XXXXXX, password as shown on the machine.

(Turn off the mobile phone Wi-Fi key to disconnect)

E. Dvr

As shown in the figure, the main page will not display the camera image, you need to click the DeVry button to view the camera image. After inserting the card, the system automatically enters the recording mode.
Recording Mode

| Start recording and click Close recording again.
---|---
| Lock the video for a few minutes and the data will not be deleted.
| Click to take a photo with one click.
| Click to return to the main interface
| Click to quickly return to the mobile Internet interface
| Turn recording sound on or off.

F. Al Motion Detection

Al Motion Detection blind spot detection technology, through vehicle-mounted intelligent terminals, Al Motion Detection cameras, vehicle-mounted displays, sound and light alarms and other equipment, when reversing, image data collection and intelligent identification of pedestrians behind the vehicle are performed, and then an early warning is issued to the driver.
Motion Detection 

You can choose to tumen off/on the Al Motion Detection function in the setting menu bar, turn offend the warning sound of the Al Motion Detection function, and adjust the sensitivity of the Al Motion Detection function.

Pedestrian detection is only displayed when the vehicle is in reverse and a pedestrian is detected.

G. Audio output

As shown in the figure, click the [Audio Output] button to enter the audio output selection interface.
Audio output 

[Speaker] : The sound will be played from the speaker of the smart screen.
Smart Screen

[Carplay/Auto] : Select s mode, and then connect t [Apple CarPlay] or [Android Auto] 0 Gast the screen, you can use the phone’s Bluetooth (o directly connect o the orginal car’s Bluetooth. Afer the connection is successiul,all Sounds from the device willbe transitted to the original car speakers via Bluetooth

After selecting this mode, the volume icon will change o the Bluetooth transmission icon [ ]. and the volume cannot be adjusted on this device, S0 the volume must be adjusted on the original car.
Bluetooth Transmission

[FM]: After selecting this mode, the FM transmission mode will be timed on by default. For example, if the device’s FM transmit band is tuned to FM 106.0 MHz (any unoccupied channel can be used), the car radio will also tune its receive band to the same FM 106.0 Hz. After the connection is successful, al the sounds of the device will be transmitted to the original An opt car speakers through FM transmission.

Afar saucing tis made has volume on vlog change o an FM transmission on [ ] and the volume cannot be adjusted on this device, so the Volume M 5o adjusted on he opine car

(Not using the original power cord may result in deterioration of the FM transmission signal or loss of function.)
Deterioration

[AUX] : After selecting this mode, the AUX output mode will be turned on = (e by default. Use the AUX sound source cable to connect the smart screen to ‘the original car. After the connection is successful, all the sounds of the device will be transmitted to the original car speakers through the AUX sound source cable for playback.

After selecting this mode, the volume icon will change o the AUX output icon [ ] and the volume cannot be adjusted on this device, 50 the volume must be adjusted on the original car.

H. Setting

As showing the figure, click the [Settings] button on the home page to enter the 5 N setting Interface.
Setting Interface
Setting Interface

Icon Specification
[Playback] Please refer to the instructions below the form.
Click [Record resolution] to enter the setting of video resolution:

720P11080P/2.5K/4K
| Click [Split time] to enter the video division time setting: Video segmentation time is optional:
2 minutes / 3 minutes / 5 minutes.
| The system defaults to 3 minutes.
[Al Motion Detection] Please refer to the instructions below the form.
| Click [Microphone] to enter the settings: You can choose to turn it off or on.
| Click on [Camera Format] to enter the settings: You can choose 720P/720N/1080P/1080N
Button Icon| Click [Language] to enter the settings: Language can
| be set: Simplified Chinese / Traditional Chinese / English / Russian / Spanish/ French 1 German /Japanese / Korean /Italian /Portuguese
Button Icon| [Time lapse video] Please refer to the instructions below the form.
Button Icon| Click [Date & time] to input settings: Individual settings: Year / month 1 day 1 hour / minute / second / time format
Button Icon| Click on [Collision Sensitivity] to enter the settings: You can choose high/medium/low/off
When the sensitivity is turned on and the vehicle collides, the machine will automatically lock the video being recorded to ensure that it will not be overwritten or deleted by the loop recording.
Button Icon| [Reverse setting] Please refer to the instructions below the form.
Click [Screen Saver] to enter the settings:
the screen saver can be set to: off /1 minute / 5 minutes
After setting 1 minute or 5 minutes, the screen will automatically turn off if there is no operation for the corresponding time. After entering the screen saver, press the power button to turn on the screen.
Button Icon| Click [Voice Control] to enter the settings:
Voice control commands include: show front camera / show rear camera /tumor display /tum off display /show all cameras After opening the option, in the main interface, say the corresponding command entry, and the system will perform the corresponding operation.
| Click [Driving Position] to enter the settings:
You can choose left or right rudder, the shortcut menu bar in Apple
Car Play Select left rudder to be on the left, select right rudder to be on the right
Click [Screen rotation] to enter the settings:
After opening, the content on the screen will be rotated 180°
Button Icon| Click [Storage Info] to enter the settings:
| You can see the memory information of the memory card
| Click [Format] to enter the settings:
This option will format all data information of the inserted U disk. It is recommended to manually format the SD card when inserting it for the first time to ensure that the card has sufficient capacity
Note: It is recommended that users manually format the SD card regularly
Button Icon| Click [Factory reset] to enter the settings: With a factory reset, you return all settings to their original state.
| Click [Firmware Version] to enter the menu:
This option is available in the current base version for easy confirmation.

Play back

As showman the figure, lock [Playback] stings of enter the video playback efface.
Playback 

You can click any to play back the video and play the video on the right,

Button Icon

  • [Loop record] Looping video captured by the camera.
  • [Photos] Click to view the pictures taken by the one-click photo function.
  • [Look] Click the video saved after locking.

Click the [Delete] button to delete the material
Glick to adjust volume.

J. AT Motion Detection

‘The Al Motion Detection function needs to be connected to the reversing signal ine before it can be used. Click [Confirm] to enter the setting.
Motion Detection 

Reversing Alarm can be selected: Close /Open Alarm sound can be selected: Ciose /Open Alert sensitivity can be selected: Low/MiddielHigh
Motion Detection 

K. Time lapse video

In the settings, click the “time lapse video” option, you can choose “off”, 12 hours”, 24 hours” (default off). After selecting the monitoring time for 12 hours or 24 hours, when the car is turned off (ACC is disconnected), the system will turn off the screen after a five-second countdown to reduce power consumption and enter monitoring.

The system cannot do anything at this point unless the car is re-ignitioned (ACC .powered). Manually touch the screen to light up the screen display, the system will prompt “parking monitoring, shut down later”

In the settings, if the “time-lapse video” function is selected to “off”, after the car is tured off (ACC is disconnected), the system will enter the normal shutdown process,and will not enter the parking monitoring function;

“Time-lapse video” is continuous shooting at the speed of one frame per second, taking up very little space. But then it will play at 30 frames per second, so there will be a 30 times faster visual effect.

Note: And this function needs to be connected to a normal power supply in order to use it normally!

L. Reverse setting

Click [Reverse setting] to enter the settings:
Reverse Setting 

There are two options for the status of the reverse lane: Off /on
Off: The reverse assist line will not be tumed on at any time
On: Reversing auxiliary lines will appear when reversing

There are two options for rear mirroring: Off fon
Off: the rear road camera picture is normal
On: mirror image display of rear camera

Click [Calibration] to enter the reverse line setting interface
Calibration

Park the car in the middle of the parking space, manually drag. [ ] and adjust the position of the reverse auxiliary line up, down, left, and right, so that the reverse. auxiliary line and the parking line are flush with the ground.

Click the [ ] button to move the initial position of the reverse auxiliary line left and right

After adjusting the auxiliary line for reversing, click [Confirm] to confirm,

Troubleshooting

Item Problem Solution
1 Unable to start (D501-BSDsupports 7V-32V car use high voltage can not be
used)
  1. Check whether the DC head of the cigarette lighter power cord is damaged or aging.
  2. Check whether the fuse of the power plug is disconnected or burned.

2| No touch phenomenon|

  1. Touch is invalid during power-on, wait for normal power-on before operation.
  2. Check whether the touch is damaged, do not touch the screen with sharp objects, it is easy to scratch and damage.

3| The rear view camera has no image|

  1. Buy the manufacturer’s matching rear-view camera before it can be used.
  2. Whether the AVIN interface is inserted to the bottom.
  3. Check if the camera format matches

4| Machine heat, jam phenomenon| Avoid direct sunlight or exposure sunlight during use. The normal operating temperature of D501-BSD is-4-149°F After disconnecting the power supply, the temperature ofD501-BSD will be lower than 149°F handwork normally.
5| Carpal cannot connect|

  1.  The first connection takes a little longer.
  2. Only iPhone supports  Carpal.
  3. Check that the Wi-Fi and Bluetooth functions of the mobile phone are normal.
  4. Enter Settings  General -Carley vehicle, delete all records and reconnect
  5. Restart the iPhone and reconnect it.

6| Android Auto cannot connect|

  1. Only Android phones are supported
  2. Update Auto and related applications on mobile phones to the latest version
  3. Do not enable VPN on the mobile phone
  4. Check that the WiFi and Bluetooth functions of the mobile phone are normal. Restart the
  5. Android phone and connect it again.

7| The Bluetooth music|

  1. Please set the screen casting mode to Bluetooth music. Other modes do not support Bluetooth music.

Reminder: Please ensure that there is no obstruction between the mobile phone and the device, and the Wi-Fi / Bluetooth signal communication is smooth, otherwise the product functions cannot be used smoothly.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals