Anker Soundcore Premium Stereo Bluetooth Speaker A3143 User Manual
- June 13, 2024
- Soundcore
Table of Contents
Anker Soundcore Premium Stereo Bluetooth Speaker A3143
USER MANUAL
What’s Included
At a Glance
1. Power button
2. Battery indicator
3. Play/Pause button
4. Status Indicator
5. Volume buttons
6. 3.5mm Aux input
7. Micro USB charging port
Using Your Speaker
Turn on/ off
The speaker will automatically turn off after 70 minutes if no device is connected
Pair With Your Device
Rapidly flashing blue: Pairing mode
Steady blue: Connected to a device
NOTE:
- When turned on, the speaker will automatically connect to the last connected
- To pair a different device, first disable Bluetooth on the connected device or press CB to re-enter pairing mode. Then repeat the pairing steps.
- Having connection problems? Remove the speaker from your device’s Bluetooth history, ensure it is less than 3 feet away then try pairing again .
Connect via AUX
Steady Blue: AUX Mode
Warning: When using AUX mode, control audio playback via the connected device.
Charge Your Speaker
Flashing Red: Low Power
Steady Amber: Charging
OFF: Full Charge
Warnings: Use the included USB cable to charge your speaker and make sure it is fully charged
Controls
Un-Pair Connected device and re-enter pairing mode
Play/ pause
Volume up/ down
Volume up/ down
Volume up/ down
Specifications
| Input | 5 V 2== 1.5A |
|---|---|
| Audio output | 10 W × 2 |
| USB output | 5 V 2 A |
| Play time(varies by volume level and content) | 7-8 hours |
| Size | 210 x 60 x 60 mm; / 8.3 x 2.4 x 2.4 in |
| Weight | 621 g / 21.9 oz |
| Range | 10 m / 33 ft |
DOWNLOAD
Anker Soundcore Premium Stereo Bluetooth Speaker A3143 User Manual – [Download PDF]
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>