Danfoss AB Solenoid Coil Installation Guide
- June 4, 2024
- Danfoss
Table of Contents
ENGINEERING TOMORROW
042R9019
Installation guide
Solenoid coil
Type AB, AM, AC, AK, AL, AP, BB, BA, BC, and BD
| Type of control | 1 |
|---|---|
| Class of protection | Class I |
| Ambient temperature | See Tambient on coil |
| Voltage variation Voltage tolerances | For voltage variation, see print on coil |
For voltage tolerances see datasheet, when ordering the coil
Humidity| Only none-conductive pollution occurs except that occasionally a
temporary conductivity caused by condensation is to be expected.
Ball pressure test| 200 °C (392 °F) in accordance to IEC 60695-10-2
Impulse withstand voltage| Spade
Plug
Plug| 4.0 kV at altitude <4000 m (13123 ft)
4.0 kV at altitude <2000 m (6561 ft)
3.1 kV 2000 m<altitude<4000 m (6561<altitude<13123 ft)
Overvoltage category| III
Degree of protection IPxx Pollution degree PDX| Enclosure rating according to
IEC standard 60529 (See illustration for details A-B) Pollution degree
according to EN60664-1 (See illustration for details A-B)
Installation| Integrated control
Incorporated control
Independently mounted control (IP65/1P67)
Suitable cable, Conductor size for plug| Ø6.6 — 011 mm (Ø0.26 — Ø0.43 in)
0.75 — 1.5 mm2(21 — 15 AWG flexible cord)
Suitable cable for cable plug| See datasheet when ordering the coil
Cable conductor size| 3 x 0.75 mm2 (3 x 0.001 in2)
Plugs can be removed/mounted| 10 times
Surface temperature| Independently mounted controls must be inaccessible in
normal use if the surface temperature on the control > 85°C
- Only qualified personnel is allowed to install or maintain this product
- Disconnect the power when dismounting the coil
- Avoid direct exposure to alkaline conditions, use in neutral conditions is recommended
- Ensure that the O-ring is in place on the valve
- If the coil is used as independently mounted control, the end-user shall use a plastic cable gland with strain relief
Visit www.products.danfoss.com for further technical data
© Danfoss | Climate Solutions | 2021.12
AN353730866505en-000301
Info for UK customers only: Danfoss Ltd., 22 Wycombe End, HP9 1NB, GB
References
- Danfoss Global Product Store | Homepage
- Danfoss Spain Product Store | Homepage
- Danfoss France Product Store | Homepage