Anker Soundcore Pro+ Portable Speaker A3142 User Manual
- June 13, 2024
- Soundcore
Table of Contents
Anker Soundcore Pro+ Portable Speaker A3142
USER MANUAL
Product Number A رقم المنتج 3142
Bluetooth Speaker / SoundCore Pro+
51005000893 V04
Safety Instructions
1. Avoid dropping.
2. Do not disassemble.
3. Do not submerge in water.
4. Avoid extreme temperatures.
5. Use original or certified cables
6. Ensure there is enough free space around the speaker for ventilation.
7. Do not use the device outdoors during thunderstorms.
8. Ensure the protective flap is sealed before exposing SoundCore to liquids,
do not charge near water.
9. Do not use any corrosive cleaner/oil to clean.
What’s Included
At a Glance
Charge Your SoundCore
Charge USB Devices
Turn on / off
Bluetooth Pairing
Rapidly flashing blue: Pairing mode
Steady blue: Connected to a device
Un-pair connected device and reenter pairing mode
Warning: When turned on, SoundCore will automatically connect to the last connected device if available. If not, SoundCore will enter pairing mode.
NFC Pairing
To break connection, tap again the NFC device onto SoundCore’s NFC detection area.
Connect via AUX
- SoundLine AUX cable sold separately
WARNING: When using AUX mode, Bluetooth connection will break.
Controls
Specifications
Specifications are subject to change without notice
| Input | 5 V 2 A |
|---|---|
| Audio output | 12.5 W × 2 |
| USB output | 5 V 2 A |
| Impedance | 4 Ω |
| Driver (full range) | 2 x 1.75” |
| Driver (tweeter) | 2 x 1” |
| Battery capacity | 8000 mAh |
| Waterproof rating | IPX4 |
| Bluetooth version | V4.2 |
| Charging time | 4-6 hours |
| Play time(varies by volume level and content) | 18 hours |
| Size | 204 x 72 x 69 mm; / 8 x 2.8 x 2.7 in |
| Range | 20 m / 66 ft |
| Frequency response | 65 Hz – 20 KHz |
| Weight | 760 g / 26.8 oz |
DOWNLOAD
Anker Soundcore Pro+ Portable Speaker A3142 User Manual – [Download PDF]
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>