SK biopharmaceuticals Co Ltd SKBPSAGL01KR Zero Glasses Wearable Device Instruction Manual
- June 13, 2024
- SK biopharmaceuticals Co Ltd
Table of Contents
SK Biopharmaceuticals Co Ltd SKBPSAGL01KR Zero Glasses Wearable Device
Zero Glasses Product Overview
Zero Glasses is a wearable device for measuring multiple biosignals. It is connected to a smartphone or tablet PC wirelessly and can measure 4-channel EEG, 1-channel ECG, and 1-channel angular velocity using the dedicated APP.
Product Specifications
- Charging Voltage and current: 5Vdc 300mA
- Operating Voltage: 3.7Vdc
- Operation Temp.: 10 ~ 40 degrees Celsius
- Frequency: 2402 ~ 2480 MHz
- Size:
- Device: 159.4 155.6 47.7 mm
- Cradle: 161.7 63.3 60.3 mm
- Weight:
- Device: 49 g
- Cradle: 219 g
Product Usage Instructions
- Attach the electrode to the device.
- Turn on the switch on the right side of the device. The Blue LED will blink if the device is turned on.
- Open the ‘ST BLE Demo’ application on the smartphone.
- Select the ‘EEGS1V1’ option and click the ‘CONNECT’ button.
- Slide the ‘P2P Notify’ slider, and the received data will be displayed. If the application works properly, the characters will scroll on the screen.
- Scrolling may be interrupted by temporary disconnection caused by external shock, but scrolling will be restored soon, and this is considered normal operation.
- Exit the application to end the test.
FCC STATEMENT
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. To reduce interference, you can try the following
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment. This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.
**Overview
**
Zero Glasses is a wearable device for measuring multiple biosignals. It is connected to a smartphone or tablet PC by wireless and can measure 4-channel EEG, 1-channel ECG, and 1-channel angular velocity using the dedicated APP.
Signal processing module
Integrated signal processing board: EEG module, ECG module, Gyroscope sensor
Appearance
Specification
| Charging Voltage and current | 5Vdc 300mA |
|---|---|
| Operating Voltage | 3.7Vdc |
| Operation Temp. | 10 ~ 40℃ |
| Frequency | 2402 ~ 2480 MHz |
| Size | Device |
| Cradle | 161.7 63.3 60.3 mm |
| Weight | Device |
| Cradle | 219 g |
Operation
- Attach the electrode to the device.
- Turn on the switch on the right side device. If the device turns on, the Blue LED blinks.
- Open the ‘ST BLE application on the smartphone.
- Select the ‘EEGS1V1’, and click the ‘CONNECT ’ button.
- Slide the ‘P2P Notify’ slider, and the received data will display. If the application works properly, the characters are scrolled on the screen as shown below.
- Scrolling may be interrupted by temporary disconnection caused by external shock, but scrolling is restored soon, and this is a normal operation.
- Exit the application for the end test.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>