Habitat y Jardin 1536_128809 Suspended Electric Heater Owner’s Manual

Habitat y Jardin 1536_128809 Suspended Electric Heater

Product Information

• Model: OS 1500
• Dimensions: 430×148.5×148.5mm
• Power Source: 220-240V AC
• Power Output: 1500W
• Weight: 2.36 kg

Product Usage Instructions

1. Facility:
   • Tools Needed: Level, Screwdriver, Power Drill and drill bits
   • Ensure that the supply cable is well mounted and does not come into contact with the reflector of the heater or trail into the heated area.
   • Keep a distance of at least 350mm between the heater and the ceiling.
   • Keep a distance of at least 500mm between the heater and its surrounding.
   • Keep a height of at least 2400 mm from the heater to the ground.
2. Function & Operation:
   • For OS1500, push the switch on the top of the heater to turn it on/off.
3. Troubleshooting:
   • Check if the power cord is plugged into an electrical outlet. If not, plug it in.
   • Check if electricity is reaching the main fuse.
   • Check if the switch on the heater is in the ON position.
4. Cleaning and Maintenance:
   • Regularly and carefully clean the external surfaces of the heater for efficient operation.
   • Store the heater in a cool, dry location when not in use to prevent dust and dirt build-up. Use the cardboard packaging for storage.
   • Always disconnect the heater from the electricity supply and allow it to cool before attempting to work on it.
   • If the heater has collected dust or dirt inside the unit or around the heating element, have it cleaned by a qualified service agent. Do not operate the heater in this condition.
   • Do not touch the heating element with bare fingers, as residue from your hand could affect its performance.
5. recycling:
   • At the end of the electrical product’s useful life, do not dispose of it with household waste. Please recycle it where facilities exist.
   • Check with your Local Authority or retailer for recycling advice in your country.

What’s In The Box

Warning
THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE,

We cannot be liable for any damages caused by failure to observe these instructions.

CAUTION: FOR OUTDOOR USE ONLY

IMPORTANT SAFETY INSTRUCTIONS

READ CAREFULLY-The infrared heater is designed for safe operation. Nevertheless, installation, maintenance and operation of the heater can be dangerous. Observing the following procedures will reduce the risk of fire, electric shock, injury to persons and keep installation time to a minimum. Save these instructions for future used.

1. Read all instruction before using this heater.
2. Remove the unit from its packaging and check to make sure it is in good condition before using.
3. Do not let children play with parts of package (such as plastic bags).
4. Check the household voltage to ensure it matches the heater’s rated specification.
5. Check the power cord and plug carefully before used, to make sure that they are not damaged.
6. Before unplugging the power cord, be sure to turn off the power, when energizing the unit, be sure your hands are dry to prevent from electric shock.
7. This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. If provided, use handles when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater and keep them away from the sides and rear.
8. Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
9. Do not use near or in the immediate vicinity of a bath or swimming pool or any source of liquid.
10. To protect against electric shock, do not immerse cord or plug in water or any other liquid.
11. Do not insert or allow foreign objects to enter any ventilation or exhaust opening, as this may cause an electric shock, fire, or damage to the heater.
12. Always unplug the heater when not in use.
13. Connect to properly grounded outlets only.
14. Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
15. Do not allow cord to overhang the countertop where it can be easily pulled by children.
16. Do not put fingers or foreign objects into the grill while in operation.
17. Do not leave the appliance unattended when in use.
18. This heater is not intended for use in bathrooms, laundry, and similar indoor locations, never located heater where it may fall into a bathtub or other water container.
19. No liability can be accepted for any damage caused by noncompliance with these instructions or any other improper use or mishandling.
20. This appliance is not intended for use by persons (including children) with reduces physical, sensory, or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. Children and vulnerable people should be supervised to ensure they do not play with the appliance.
21. Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
22. Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner. Disconnect power at service panel and have heater inspected by a reputable electrician before reusing. If the supply cord is damaged in any way, it must be replaced by the manufacturer or its service agent or a similarly qualified person to avoid a hazard.
23. Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.
24. To disconnect heater, turn controls to off, then remove plug from outlet.
25. To prevent overheating of this appliance, keep the air inlets and outlets clean and free of anything that may cause blockage. Check all inlets and outlets from time to time to ensure it is clear of any dirt or dust accumulation. DO NOT COVER.
26. A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable liquids are used or stored.
27. Parts of the heater may exceed 200℃, contact with the heating tube, reflector, or metal parts near the heating tube, may cause severe BURNS. To avoid burns, do not let bare skin touch hot surface.
28. NEVER place hands under the heating elements. ALWAYS allow heating element to cool at least 10 minutes before touching the heating tube or adjacent parts.
29. This product contains recyclable materials. Do not dispose this product as unsorted municipal waste. Please contact your local municipality for the nearest collection point.
30. Caution: mount with bottom of the heater at least 2.4 m above floor or ground.
31. Warning: Risk of fire – keep combustible material away from front of heater.

SAVE THESE INSTRUCTIONS

Introduction

These robust and weatherproof heaters are designed for domestic and commercial heating applications outdoor areas.

Voltage(V AC)

|

220-240V AC

Wattage(W)| 1500W
Dimensions W×H×D(mm)| 425425250
Weight(KG)| 2.36

INSTALLATION

Tools Needed:

• Level
• Screwdriver
• Power Drill and drill bits

Important:
Ensure that the supply cable is well mounted and that it does not meet reflector of the heater or that does not trail into heated area.

1. This heater should be installed by a competent person, i.e. a qualified electrician.
2. Always disconnected the heater from the electricity supply and allow it to cool before installation.
3. This heater can be heat directly.
4. Keep the supply cord away from the body of the heater which will get hot during use.
5. Do not install the heater on an inflammable surface.
6. Observe the minimum safe distance between the heater body and the inflammable surfaces when mounted.
7. If the heater is to be used outside, a weatherproof outlet is recommended.

1. Keep 350 mm distance from the heater to the ceiling.
2. Keep at least a 500 mm distance between the heater and the surrounding.
3. Keep at least 2400 mm in height from the heater to the ground.

FUNCTION & OPERATION

FOR OS1500 PUSH SWITCH: turn on/off the switch on the top of the heater

Troubleshooting

1. Check if the power cord is plugged into an electrical outlet, if not, plug in.
2. Check if the electricity to the main fuse is working
3. Check to see if the switch on the heater to the ON position

CLEANING AND MAINTENANCE

Regular and careful cleaning helps your infrared heater operate efficiently for many trouble-free years. To clean your heater, follow steps below:

1. Unplug the power cord for your safety before cleaning your appliance.
2. Make sure the heater is cool before continuing.
3. To keep the heater clean, the outer shell maybe cleaned with a soft, damp cloth. You may use a mild detergent if necessary. After cleaning, dry the unit with a soft cloth. (CAUTION: DO NOT let liquids enter the heater).
4. DO NOT use alcohol, gasoline, abrasive powders, furniture polish or rough brushes to clean the heater. This may cause damage or deterioration to the surface of the heater.
5. DO NOT immerse the heater in water
6. Wait until the heater is completely dry before use.

Storage:
Store the heater in a cool, dry location when not in use to prevent dust and dirt build-up. Use packaging cartons to store.

ATTENTION:

1. Always disconnect the heater from the electricity supply and allow it to cool before attempting to work on it.
2. If the heater has collected dust or dirt inside the unit or around the heating element, have to unit cleaned by a qualified service agent. Do not operate the heater in this condition.
3. The only maintenance required is cleaning of the external surfaces of the heater.
4. Do not touch the heating element with bare fingers, as residue from your hand could affect the life of the lamp. If it is accidentally touched, remove the finger marks with a soft cloth moistened with mentholated spirit or alcohol.
5. Do not attempt to repair or adjust any electrical or mechanical functions on this heater.
6. The heater contains no user-serviceable parts. Should the product suffer damage or breakdown, it must be returned to the manufacturer or its service agent.
7. Damaged supply cords to be replaced by the manufacturer, service agent or similarly qualified person to avoid hazard.

RECYCLING

• At the end of the electrical products useful life it should not be disposed of with household waste.
• Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice in your country.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>