Wingtech Group ODP-R133 Bluetooth Tablet User Guide
- June 13, 2024
- Wingtech Group
Table of Contents
Wingtech Group ODP-R133 Bluetooth Tablet
Product Information
Product Name: ODP-R133
Package Contents
- The items supplied with the device may vary by region.
Safety Information
- Please read all safety information before using the device to ensure safe and proper use.
- For more safety information, you can access the safety information menu in the Settings app.
Correct Disposal
- The product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste.
- The batteries in this product should not be disposed of with other household waste.
Package contents
- Device
- USB cable
- Ejection pin
- Quick start guide
The
items supplied with the device and their
To turn on the device, press and hold the Side key for a few seconds.
The
charger should remain close to the electric socket and easily accessible while
charging.
If your device is frozen and unresponsive, press and hold the Side key and the Volume Down key simultaneously for more than 7 seconds to restart it.
- It is recommended not to use fixed graphics on part or all of the touchscreen for extended periods. Doing so may result in afterimages (screen burn-in) or ghosting.
To prevent possible hearing damage when using a headset, do not listen to sound at high volume for long periods.
Depending on the region, you can view the regulatory information on the device. To view the information, launch the Settings app.
FCC Notice
The device may cause TV or radio interference if The device may cause TV or
radio interference if used in close used in close proximity to receiving
equipment .proximity to receiving equipment. The FCC can require you to The
FCC can require you to stop using thestop using the mobile device if such
mobile device if such
interference cannot be eliminated interference cannot be eliminated..
Information about the RF exposure from FCC
In August 1996, the Federal Communications Commission
(FCC) of the United States, with its action in Report and Order FCC 96-326,
adopted an updated safety standard for human exposure to radio frequency (RF)
electromagnetic energy emitted by FCC regulated transmitters. Those guidelines
are consistent with the safety standard previously set by both international
and U.S. standards. The design of this tablet complies with FCC guidelines and
these international standards.
Body effects For body operation, this device has been tested and meets FCC RF exposure guidelines when used with any accessory that contains no metal and which provides a minimum separation distance of 0 mm between this device and the body of the user. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. Use of other accessories may not ensure compliance with FCC RF exposure guidelines.
Class B Compliance under article 15 of the FCCC lass B Compliance under article 15 of the FCC This device This device complies with Part 15 of the FCC complies with Part 15 of the FCC Rules. Operation is subject to Rules. Operation is subject to the condition that the condition that this device does not cause harmful this device does not cause harmful interference. I interference. Operation is subject to the following two Operation is subject to the following two conditions: This device may not cause harmful conditions:
- This device may not cause harmful interference, interference, and
- This device must accept any interference received, interference received, including interference that including interference that may cause undesired operation. may cause undesired operation.
Caution
The user is cautioned that changes or The user is cautioned that changes or
modifications not modifications not expressly approved by the expressly
approved by the party responsible for compliance party responsible for
compliance could void the could void the user’s authority to operate the
equipment. user’s authority to operate the equipment.
Some content may differ from your device depending on the region, service provider, or software version, and is subject to change without prior notice.
Correct disposal
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste.
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste.
Safety information
Read all safety information before using the device to ensure safe and proper use. You can view more safety information in the safety information menu of the Settings app.
Warning
Your device contains magnets, which may affect medical devices, such as
pacemakers or implantable cardioverter defibrillators. If you are using any of
these medical devices, keep your device a safe distance from them and consult
with your physician before you use the device
Follow the warnings below to prevent incidents, such as fires or explosions, injuries, or damage to the device
- Do not expose the device to physical impact or damage.
- Prevent the multipurpose jack and battery terminals from coming into contact with foreign materials such as metal, liquids, or dust.
- • If any part of the device, such as the glass or acrylic body, is broken, smokes, or emits a burning odor, stop using the device immediately.
- Do not turn on or use the device when the battery compartment is exposed.
- Do not disassemble or reuse the battery.
- Do not allow children or animals to chew or suck the device.
- The device can be used in locations with an ambient temperature of 0 °C to C. You can store the device at an ambient temperature
°C. Using or storing the device outside of the recommended temperature ranges may damage the device or reduce the battery’s lifespan.
- Do not use your device in a hot environment or near fire.
- Comply with all safety warnings and regulations regarding mobile device usage while operating a vehicle.
Specific Absorption Rate (SAR) certification information
Your device conforms to U.S. Federal Communications Commission (FCC) standards
that limit human exposure to radio frequency (RF) energy emitted by radio and
telecommunications equipment. These standards prevent the sale of mobile
devices that exceed a maximum exposure level (known as the Specific Absorption
Rate, or SAR) of 1.6 W/kg.
In normal use, the actual SAR is likely to be much lower, as the device has
been designed to emit only the RF energy necessary to transmit a signal to the
nearest base station. By automatically emitting lower levels when possible,
your device reduces your overall exposure to RF energy.
This device complies with part 15 of the FCC Rules. Operation i s subject to the following two conditions
- This device may not cause harmful interference.
- this device must accept a ny interference received, including interference that may cause undesired operation.
The FCC has granted an Equipment Authorization for this mode l device based on the compliance of all reported SAR levels with the FCC RF exposure guidelines. Some devices are required to receive approval from the FCC. If your device required FCC approval, you can view the FCC certification by opening Settings About phone Status.
Note
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>