JBL EON ONE PRO Professional Loudspeakers User Guide

BATTERY POWERED | ONE HAND CARRY
BLUETOOTH AUDIO | LEGENDARY JBL SOUND
QUICKSTART GUIDE

LISTENING CONFIGURATIONS

CHARGE THE UNIT

1. Confirm the Power Switch (J) is in the OFF position.
2. Connect the power cord to the Power Receptacle on the rear of the speaker.
3. The Battery Level Meter (L) will illuminate, indicating the unit is charging.
4. The unit is charged when the Battery Level Meter (L) is fully illuminated when powered on or off.

PLUG IN THE INPUTS

1. Turn the Channel Volume Controls (F) and Master Volume Control (N) all the way to the left before connecting any inputs.
2. Connect your device(s) via the input jacks provided.
3. If CH1 – CH4 inputs are being used, select MIC or LINE via the Mic/Line Button (E).
4. If connecting instruments directly to inputs 3 – 4, engage the Hi-Z button (Q).

POWER ON THE UNIT

1. Flip on the Power Switch (J); the Power LED (K) and the Power LED on the front of the speaker will illuminate.

BLUETOOTH AUDIO

This device supports Bluetooth audio streaming.
To connect your device:

1. Turn on Bluetooth on your source device.
2. Press the Bluetooth Pair Button (O).
3. Find JBL EON ONE PRO on your device and select.

SET OUTPUT LEVEL

1.  Set the Channel Volume Controls (F) to12 o’clock.
2. Slowly turn the Master Volume Control (N) to the right until the desired volume is reached.
3. Fine tune the Channel Volume Controls (F) for the desired mix balance.
4. Enjoy your audio!

Please visit http://www.jblpro.com/Microsite-EONONE-pro for complete documentation.
JBL Professional 8500 Balboa Blvd. Northridge, CA 91329 USA
© 2017 Harman International Industries, Incorporated
EON ONE PRO Quickstart Guide Rev A

References

• EON ONE | JBL Professional Loudspeakers | English (US)

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>