maono WH30 Wireless Neckband Headphones User Manual

June 13, 2024
maono

GLOBAL BEST SELLING INTERNET MICROPHONE

maono WH30 Wireless Neckband Headphones
User Manual
Dual-mode Wireless Monitor Headphone

|
---|---
http://weixin.qq.com/r/REMhOejEvrXBraxa9xZW| To get technical support, please scan the OR code
https://www.maono.com/pages/wh30-manauls-drivers

Product picture

Earphone

maono WH30 Wireless Neckband Headphones - Earphone

Transmitted

maono WH30 Wireless Neckband Headphones - Transmitte

Earphone and Transmitter Buttons Functions

Device Button Functions and Operations
1-n monitoring mode Bluetooth Mode
Earphone Power Button [ ] Long hold 3s to turn on/off

on/off
Volume [+]| Click to increase volume step by step Long hold to increase volume continuously, release to stop| Click to increase volume step by step.
Long hold to increase volume continuously, release to stop.  Double click to play next song.
Double click to hang up phone while on the phone.
Volume [—]| Click to decrease volume step by step Long hold to decrease volume continuously release to stop| Click to increase volume step by step.
Long hold to increase volume continuously, release to stop.  Double click to play previous song.
Double click to hang up phone while on the phone.
[M] Button| Long hold 3 seconds to start pairing| Single click to pause/play, answer/hang up call. Hold 3 seconds to stop Bluetooth connection.
[M] Button and Volume [+]| Hold 1-N monitoring/Bluetooth mode for 3s to switch| Hold 1-N monitoring/Bluetooth mode for 3s to switch
USB-C Charging Port| For charging and software update| For charging and software update
Transmitter| USB-C Charging Port| For charging and software update
Power Button [ ]| Long hold 3s to turn on/off| Long hold 3s to turn on/off
Audio Plug| 3.5mm TRRS plug

Wireless monitoring earphone user guide
Long hold the power button for 3 seconds to turn it on/off. Monitoring mode on, the LED indicator turns solid green. Bluetooth mode on, the LED indicator turns blue. Earphone off, LED Indicator turns off.
Wireless monitoring earphone and transmitter paring guide
The product support one-transmitter connected to multi-receivers. Please decide whether to buy extra earphones according to actual needs. The transmitter and earphone is paired out of factory, they will get paired automatically after powers on. If they don’t get paired automatically, please follows these steps to get them paired.

  1. Press” on the transmitter to turn it on.
  2. After it powers on, please double click” “to wait for pairing, green LED flash fast.
  3. Press” on the earphone to turn it on.
  4. After it powers on, please hold [M] button for 3 seconds to pair the transmitter and earphone. green LED flash fast. After transmitter detected the earphone and connect to it, please single click” to finish pairing. LED light will be solid green after pairing. Warm Notes: Please refer to 2,4 to get the transmitter paired with extra earphones.
  5. After the first successful pairing, the following pairing will be automatic.
    Note: Pairing time depends on user& operation speed.

maono WH30 Wireless Neckband Headphones - Charing

Wireless monitoring earphone and transmitter parameter

Earphone battery capacity| 120mAh| Charging time| 2.5 hours| Wireless technology| 2.4GHz low-latency audio transmission
---|---|---|---|---|---
Transmitter batter capacity| 400mAh| Working hours| 8 hours| Transmission range| 30-50 meters
Battery power| 3.7V| Charging| Solid red LED indicator| Frequency range| 2.4GHz-2.48GHz
Charger power| 5V| Fully charged| Solid green LED indicator| Low battery| Blinking red lights

** Company: Qing UG (haftungsbeschrankt)
Address: Undinestr. 7,12203 Berlin Germany
Tell: 004917662179550
E-mail: pmdheinrich@gmail.com
Company: CET PRODUCT SERVICE LTD.
Address: Chase Business Centre, 39-41
Chase Side, London N14 5BP United Kingdom
Email: info.cetservice@gmail.com
TEL: +447419325266
Technical support:**
support@maono.com
www.maono.com
Final clause: Information and data contained in this manual are subject to change without notice in advance.
We frequently update product firmware to improve user experiences and performance.
The status display and operations may be slightly different among different firmware versions.
For latest user manuals, please access on https://www.maono.com.

Made in China

Documents / Resources

| maono WH30 Wireless Neckband Headphones [pdf] User Manual
WH30 Wireless Neckband Headphones, WH30, Wireless Neckband Headphones, Neckband Headphones
---|---
| MAONO WH30 Wireless Neckband Headphones [pdf] User Manual
WH30 Wireless Neckband Headphones, WH30, Wireless Neckband Headphones, Neckband Headphones, Headphones

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals