Rotorama 20230803-ADAPTER3 Speedy Bee Adapter V3 User Manual

Speedy Bee Adapter 3
User Manual

20230803-ADAPTER3 Speedy Bee Adapter V3

1. Bluetooth/WiFi Status Light
2. Quick Charge Indicator
3. Input Voltage Indicator
4. Low Battery Indicator
5. input Voltage Value(Volt)
6. Charging Indicator
7. Charging Port (USB A)
8. PH2.0 Port(1-6S input)
9. XT60 Port(1-6S Input)
10. Type C Connector( to FC )
11. Micro USB Connector( to FC )

Power Input(⑧⑨)

• PH2.0(⑧) and XT60(⑨) both support 1-6S Lipoid battery input.
• Please ensure the input voltage is above 3.8V when using 1S Lipoid as the input power.
  For some quads(very few) may consume large current and can signicantly lower down the output voltage for powering the ight controller end.

Indicator Definition((①②③④)

1. Bluetooth/WiFi Status Light
   Blinking RED indicates the Adapter 3 has recognized the flight controller connection but has not connected to the app.
   Solid GREEN indicates the Adapter 3 has recognized the fight controller and also has connected to the app.
   &inking GREEN indicates the Adapter 3 has connected to the Bluetooth of a mobile device but has not recognized the flight controller

2. Quick Charge Indicator
   Solid GREEN indicates the Adapter 3 is now executing quick charge for a device.

3. Input Voltage Indicator
   Solid RED indicates the input battery level is lower than 40%(Voltage per cell < 3.79V)

4. Low Battery Indicator
   Blinking RED indicates the vokage of each cell of the battery is lower than the set threshold (the default threshold is 3.7V).

5. Charging Indicator
     Solider indicates the Adapter is now charging for a device and the charging power is lower than 6 Waltz,
   Solid GREEN indicates the Adapter is now charging for a device and the charging power is higher than 6 Waltz

Silicone Data Cable

• When you receive this product, please install the silicone data cable inside the package to the Adapter 3. The two ends of this data cable are Type C connector and Micro USB connector. Please choose the corresponding connector to connect to the light controller according to the type of the light controller’s USB interface.

NOTE 1 – Issue to power the Adapter 3 even if the data cable is connected to the main body on both ends.
NOTE 2 – Plug the cable back after use for better storage.

Physical Connection

App

Getting the app
Search ‘Speedy Bee’ on Google Play or App Store. Or download the Android .ap file on our website: https://www.speedybee.com/download

Parameter settings

• When you receive this product, please install the silicone data cable inside the package to the Adapter 3. The two ends of this data cable are Type C connector and Micro USB connector. Please choose the corresponding connector to connect to the light controller according to the type of the light controller’s USB interface.

View the charging status

• App > Click ‘Bluetooth’ button > Click the lighting icon on the device display page.

Black box data analyzing

• Click the left side sliding menu bar to enter this function.

Firmware Flashing for Flight Controller

• Click the left side sliding menu bar to enter this function.

References

• download

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>