CUGGL 6983183 Extending Metal Wall Gate Instruction Manual
- June 13, 2024
- cuggl
Table of Contents
CUGGL EXTENDING METAL WALL GATE
care & instruction manual
IMPORTANT
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
IMPORTANT! READ AND FOLLOW THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE
REFERENCE
Introduction
Please read the instructions thoroughly to ensure proper installation.
Please immediately inspect your safety gate upon receipt. If you see any
damage, or additional parts are required for this gate, do not assemble gate
and please go to back page of the instruction booklet for website or Consumer
Relations Representative information. We recommend that you carry out the
installation away from young children as some of the smaller components may
present a choking hazard when loose.
Important Information
Please check the gate on a regular basis to ensure gate and parts are all in
proper working order.
If the gate is used at the bottom of the stairs, please place towards the
front of the lowest tread.
If the safety barrier is used at the top of the stairs, it should not be
positioned below the top level.
Ensure the gate is attached between two clean and solid surfaces.
Ensure appropriate fixings are used for drywall, wood, brick, etc. If wall
plugs are provided with the gate and do not secure to the wall satisfactorily,
consult with a hardwarestore for your proper wall plug application. If
additional parts are required for this gate, please go to back page of the
instruction booklet for website or Customer Care Team information.
Disclaimer
Any safety gate which has been subjected to misuse, abuse, abnormal use,
excessive wear and tear, improper assembly, negligence, environmental
exposure, alteration or accident, or has had its serial number altered or
removed invalidates any and all claims against the manufacturer. Any damage to
property during installation of your safety gate is the sole responsibility of
the end user.
WARNING!
- WARNING– Never use with a child able to climb over or dislodge the gate or enclosure.
- WARNING– Do not use the safety barrier if any components are damaged or missing.
- WARNING– Incorrect installation can be dangerous.
- WARNING– The safety barrier must not be fitted across windows.
- WARNING–Always check that the barrier is properly closed.
- WARNING–To avoid the danger of death or serious injury never stack one barrier above another in an opening.
- Check that the safety barrier is correctly closed. It is manual closing system.
- To prevent serious injury or death, securely install gate or enclosure. And use according to manufacturer’s instructions.
- Safety barrier should be checked regularly to ensure it is secure and functioning in accordance with these instructions.
- Additional or replacement parts should only be obtained from the manufacturer or distributor.
- Adjust to fit opening between 60cm and 97cm.
- Do not allow older children to climb on or over the gate as this can result in an accident.
- Safety barrier is suitable for use with children up to 24 months of age.
- This product will not necessarily prevent all accidents. Never leave child unattended.
- This safety barrier complies with EN1930:2011.
- This safety barrier is for indoor domestic use only.
- To clean: Use mild soap and wipe with a damp cloth.
- Adult assembly required.
- Install according to manufacturer’s instructions.
A Guide to Wall Mounting & Fixing
Important note:
If plastic wall plugs (rawl plugs) are supplied with your product, e.g.:
- these are only suitable for use in masonry walls.
If you are in any doubt about the correct wall plugs for your wall, seek
professional advice.
Failure of the product due to using the incorrect fixings is the
responsibility of the installer.
Important: when drilling into walls always check that there are no hidden
wires or pipes etc.
Make sure that the screws and wall plugs being used are suitable for
supporting your unit. Consult a qualified tradesperson if you are unsure.
Hints:
- General rule: LN always use a larger screw and wall plug if you are not sure.
- Ensure you use the recommended drill bit to match the wall plug and hole size.
- Ensure you drill the hole horizontally; do not force the drill or enlarge the hole.
- Take extra care when drilling high walls, ceilings and ceramic tiles. Ensure wall plugs are inserted beyond the thickness of the ceramic tiles to avoid the tiles splitting or cracking.
- Ensure wall plugs are well fitted and are a tight fit in the drilled hole.
Types of walls
You can use one of the following types of wall plug if your walls are made of
brick, breeze block, concrete, stone or wood.
No.1 “General Purpose” wall plug
Generally aerated blocks should not be used to support heavy loads, use a
specialist fitting in this case. For light loads, general purpose wall plugs
can be used.
No.2 “Plasterboard” wall plug
For use when attaching light loads onto plasterboard partitions.
No.3 “Cavity Fixing” wall plug
For use with plasterboard partitions or hollow wooden doors.
No.4 “Cavity Fixing – Heavy Duty” wall plug
For use when fitting or supporting heavy loads such as shelving, wall cabinets
and coat racks.
No.5 “Hammer Fixing” wall plug
For use with walls stuck with plasterboard. The hammer fixing allows it to be
fixed to the wall rather than the plasterboard. Always check the fixing is
secure to the retaining wall.
No.6 “Shield Anchor” wall plug – heavy loads
For use with heavier loads such as TV and HiFi speakers and satellite dishes etc.
Care & Maintenance
Safety: always check the fitting and location to ensure your safety in
and around the home.
Fitting: from time to time check the fitting to ensure the wall plugs or
screws do not become loose.
If you need help or have any question, call the Argos Aftersales Helpline:
0345 640 2020
Cut the installation template following the dotted line.
Stick the longer one (G) in one side of wall and shorter one (H) to the
directly opposite wall.
The dotted line should be full attached the floor and make sure the template
stand in vertical.
Then mark the position of the holes.
Drill 5 mm hole for the 6 marked positions,
then put wall plugs (A), and use screw (B) to fix component (C) and (F).
Adjust the gate width to fit the door width by bolts (K) and (L).
Caution: please refer to page 9 to make correct length adjustment.
Put on the gate on (C) and (F), th en use screw (B) to fix component (D).
One-handed use, press down the button and lift the gate for two way opening.
Use the tools provided to adjust bolt k to get smooth lock and unlock
operation.
Caution: Check the lock function before each use!
Customer care
Your child’s safety is your responsibility
If you have a problem with this product or require replacement parts, please
contact your nearest Argos store or telephone the Argos Customer
Care Team on 0345 640 2020
Alternatively write to:
Customer Care Team
Produced in (China) for Argos Limited and Sainsbury’s Supermarkets Ltd,
London EC1N 2HT, UK. Argos (N.I.) Ltd and Sainsbury’s (NI) Ltd,
Forestside Shopping Centre, Upper Galwally, Belfast, BT8 6FX, UK.
TEL 0345 640 2020
www.argos.co.uk/cuggl
Cat.No.:6983183
V11 2023-08-29
Documents / Resources
|
CUGGL 6983183 Extending Metal Wall
Gate
[pdf] Instruction Manual
6983183, 6983183 Extending Metal Wall Gate, Extending Metal Wall Gate, Metal
Wall Gate, Wall Gate
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>