VAVA VA-SP008 480P Portable Smart Projector User Manual
- June 13, 2024
- Vava
Table of Contents
VA-SP008 480P Portable Smart Projector
Product Information
Manufacturer: Shenzhen Aspiron Technology
Company Limited
Address: 3rd Floor, Yiben Building, No.1063
Chaguang Road, Xili Street, Nanshan District, Shenzhen, Guangdong,
China
Model: VA-SP008 Portable Smart Projector
480P
User Manual: Included
Product Usage Instructions
Projector Introduction
The projector features a lens for auto-focus, heat dissipation
vents, HDMI and USB ports, an ON/OFF button, and various other
controls and indicators. It also has a standard screw hole for
mounting purposes.
Instruction of Remote Controller
The remote controller has a power button, direction navigation
keys, a menu key, and an OK key for confirming selections. It also
has a Bluetooth pairing mode and a mouse mode.
Turn on/off the projector
To turn on the projector, press and hold the right ON/OFF button
for 3 seconds. To turn it off, press and hold the power button for
1 second or use the power button on the remote control.
Focus adjustment
To adjust the focus manually, you can either press and hold the
focus button on the projector and use its left/right direction
arrows or press and hold the focus button on the remote control and
use its left/right direction keys.
Bluetooth remote control pairing
To pair the remote controller via Bluetooth, follow these
steps:
-
When the Bluetooth interface appears for the first time upon
turning on the device, press and hold the OK and Volume – buttons
on the remote controller for about 5 seconds. -
The remote controller indicator will flash quickly.
Please refer to the user manual for detailed instructions on
other functions and features of the projector.
Manufacturer: Shenzhen Aspiron Technology Company Limited Address: 3rd Floor,
Yiben Building, No.1063 Chaguang Road, Xili Street,
Nanshan District, Shenzhen,Guangdong,China 3FTQPOTJCMF1BSUZVAVA International
Inc. Address: 370 Lexington Ave, Suite 803 New York, NY 10017 Tel:
1-888-456-8468 Email: [email protected]
MADE IN CHINA
Model: VA-SP008 Portable Smart Projector 480P
User Manual
Please read the instruction carefully before operating the unit, the pictures
are for reference only
EN
Contents Projector Introduction
1.1 Packaging Overview
1.2 Projector Introduction
1.3 Instruction of Remote Controller Use the Projector
2.1 Turn on/off projector
2.2 Focus adjustment
2.3 Bluetooth remote control pairing
2.4 Connect to the Wi-Fi network
2.5 Home interface
2.6 Instruction of the top navigation bar
2.7 Mirror function
2.8-3.4 Other functions FCC STATEMENT
WEEE Compliance / Warranty
Product Specifications
01-03 01 02 03
04-18 04
04-05 06 07 08 09
10-13 14-18 19-20
21 22
Projector Introduction 1.1 Packaging Overview
Projector -01-
Adaptor
Model : VA-SP008 Portable Smart Projector 480P
User Manual
Please read the instruction carefully before operating the unit, the pictures
are for reference only
User Manual
Remote Controller
Projector Introduction 1.2 Projector Introduction
Lens of the projector
Long-press for auto-focus
Heat Dissipation vents
Focusing Camera Front View of the projector
HDMI Port Type-C (Charge)
IR receiving USB Port
ON/OFF
Back View of the projector
Top View of the projector
Right View of the projector
Standard Screw Hole
Reset Burn (Recovery)
Bottom View of the projector
Left View of the projector -02-
Projector Introduction
Use the Projector
1.3 Instruction of Remote Controller
Indicator light Power Button
Direction navigation key
Menu key
OK key (Confirm key) When entering characters, the keyboard can be called up
Bluetooth pairing mode Hold both “OK” and “Volume -” button five seconds to
start remote control pairing mode
Mouse mode Start: click mouse button Close: click navigation button
2.1 Turn on/off the projector Turn on Press and hold the right on/off button
for 3 seconds to turn on the device.
Turn off Press and hold the power button for 1 second to turn off the device
(Figure 1), or press and hold the power button on the remote control to power
off.
Home key Volume –
Return key Mouse
Volume + Focusing (Left and right direction keys to adjust focus)
Indicator light status Slow flash: unpaired mode
2.2 Focus adjustment 2.2.1 Manual focus (1) Press and hold the ” ” button of the projector for about 1 second to bring up the focus circle, and then press and hold the projector’s “left/right” direction arrow to focus manually; (2) Press and hold the” “button of the remote control for 1 second. After the focusing circle appears, press and hold the “Left/Right” direction key of the remote control to focus manually.
-03-
-04-
Use the Projector
2.2.2 Auto focus method (1) The distance between the projector and the wall is
about 0.5-1.5M, short press the ” ” button of the projector, the focus circle
will pop up and auto focus will be performed, and the focus circle disappears
after focusing; (2) Tilt the projector back and forth about 45 degrees, the
focusing ring will pop up, and auto focus will be activated and complete
itself. (3) Short press the ” ” button of the remote control, the focus ring
will pop up, and the auto focus will be activated and complete itself.
Use the Projector 2.3 Bluetooth remote control pairing
Pairing method:
1.When the Bluetooth interface appears for the first time as the device is turned on, press the “OK + Volume -”
button of the remote controller for about 5 seconds, the remote controller indicator flashes quickly, and the
remote controller enters automatic pairing mode.
2.Enter the “Settings-Bluetooth” interface through the “Direction/Confirm” button on the body, press the “OK +
Volume -“button of the remote controller for about 5 seconds. the remote control indicator flashes quickly. and
then click “Scan to find Device”, the remote controller enters automatic pairing mode.
-05-
-06-
Use the Projector
2.4 Connect to the Wi-Fi network Enter the system, Settings – -> NETWORK–>
select network and enter the password.
Use the Projector 2.5 Home Interface
-07Use the Projector 2.6 Instruction of the top navigation bar SEARCH HOME APPS VIDEO MUSIC SETTING WEATHER HDMI WIFI OPTION
-09-
Use the Projector 2.7.2 Mac device connection
1. The projector is connected to the internet: Click ” ” select and connect
to the same network as the projector; 2. Click ” ” and select “VA-
SP008-XXXXXX” to finish. -11-
Use the Projector
2.7 Mirror Function
According to the devices of the mirror function, open the corresponding
applications (Apple Screen Mirror / Android Mirror Apple wired Mirror), or you
can open the relevant applications in “Settings-Mirror” interface to start
Screen Mirror function.
2.7.1 Apple Mirror function iPhone device connection (1) Connect the device to
the network; (2) Enter iPhone connection operation, there are two methods for
iPhone Under Wi-Fi environment: Open the “Settings” of the mobile phone
–“Wireless LAN” Connect the mobile phone to the same network as the projector;
Without Wi-Fi environment: Open the “Settings” of the mobile phone —“Personal
Hot spot” Turn on the hot spot and connect the projector to the hot spot; (3)
Go back to the main interface of the phone, slide up to open the control
panel, and click Airplay; (4) Select “VA-SP008-XXXXX”, open “Mirror”, complete
-08-10-
Use the Projector
2.7.3 Android screen mirror function 1. Open the “Android Projection Screen”
application on the projector;
2. Connect the Android phone and the projector under the same Wi-Fi:
3. In the mobile phone “Settings” “NETWORK” “Wireless Screen projection”,
turn on the wireless projection function, and search for the device “VA-
SP008-XXXXXX” (random number), select connection;
4. Most Androids can be found in the “Shortcut Bar > Screen Sharing / Screen
mirroring/projection screen/WLAN/wireless display/multi-screen interaction”
Search the device under the menu and connect.
Wireless Screen projection
-12-
Use the Projector 2.7.4 Wired screen mirror function(iOS)
1. Please connect iPhone and projector as picture shows.
2. Please select “Trust” in the pop-up question of the phone.
iOS devices
Projector
Use the Projector 2.8 Description of external equipment How to connect a USB
flash drive
1. Insert the U disk into the USB port, open the “File Management”
application, and the device can be identified.
2. You can also go to “MY APPS” —> File Manager to check.
Tips: The first connection takes about 45 seconds, please be patient!
-13-
-14-
Use the Projector 2.9 Software upgrade Local upgrade
Copy the downloaded firmware update.zip file to the root directory of the USB
flash drive, and insert the USB flash drive (in FAT32 format); the system can
automatically recognize the upgrade package and follow the prompts to upgrade
(make sure the battery is sufficient when upgrading).
Online upgrade In the “SETTING Update-Online Upgrade” interface, search for
the new version upgrade.
3.0 Adjust Brightness There are three brightness modes of “Energy
Saving/Normal/Highlight” for selection under the interface of Settings-Image-
Brightness Mode.
-15-
Use the Projector 3.1 How to connect HDMI
After inserting he HDMI device into the HDMI interface, open the HDMI switch
icon and click to confirm; or after connecting the HDMI device, enter the
“SETTING-INPUT SOURCE – HDMI Connection” interface and confirm to open.
-16-
Use the Projector 3.2 System Settings
Reset the system in “SETTING Update-Restore Factory”. System reset will clear
the local data and local files in your device and restore it to the state when
the device was shipped. Please use this function with caution.
3.3 How to charge Connect the power adapter to the Type-C charging port. The
power indicator light is steady red, which means it is charging. The blue
power indicator light is on, indicating that the charging is complete.
-17-
FCC STATEMENT
FCC Statement This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference. (2) This device must accept any interference received, including
interference that may cause undesired operation. (3) Changes or modifications
not expressly approved by the party responsible for compliance could void the
user’s
authority to operate the equipment. NOTE This equipment has been tested and
found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in particular installation. lf this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures: -19-
Use the Projector
3.4 Introduction of other functions 3.4.1 Screen display abnormal situation
handling method (1) When the screen shows the trapezoid, you can perform
horizontal calibration under the “SETTING-IMAGE
SETTING-Keystone Correction” interface; or turn off the “Automatic Keystone
Correction” to perform custom corrections, which can solve the problem of
image errors. (2) When the auto focus of the screen is not clear, place the
machine horizontally about 1-2 meters away from the wall, and in the “Auto
Focus” interface, select “Al Mode” for “Al Auto Focus Machine Learning”. lt
can solve the problem of unclear auto focus of the machine.
3.4.2 How to connect Bluetooth speakers (1) Enter settings—Bluetooth. (2) Turn
on the Bluetooth speaker and enable the Bluetooth pairing mode (for pairing
mode, please check the Bluetooth speaker manual). (3) Click “Scan for device”
on the interface of the micro projector. (4) Then the available Bluetooth
speaker name will be displayed in the available devices (5) Click Connect to
display the Bluetooth speaker shows “Connected” on the projector to complete.
-18-
Reorient or relocate the receiving antenna. – Increase the separation between
the equipment and receiver. Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected. – Consult the dealer
or an experienced radio/TV technician for help.
5IJTFRVJQNFOUDBOCFVTFEPOMZJONPCJMFFYQPTVSFDPOEJUJPOT
‘PS$BOBEB0QFSBUJPOPGUIJTEFWJDFJTSFTUSJDUFEUPJOEPPSVTFPOMZ .)[
1PVSMF$BOBEB-
FGPODUJPOOFNFOUEFDFUBQQBSFJMFTUMJNJUÏËVOFVUJMJTBUJPOFOJOUÏSJFVSVOJRVFNFOU .)[
For USA: The frequency stability of all transmission frequencies of U-NII-1,
U-NII 2A, U-NII 2C and U-NII-3 meets the requirements of 47 CFR FCC
Part15.407(g), and the manufacturer declares that their transmission is
maintained at Band U-NII-1, U-NII 2A, U-NII 2C and U-NII-3. For Canada: The
frequency stability of all transmission frequencies of U-NII-1, U-NII 2A,
U-NII 2C and U-NII-3 meets the 47 CFR FCC Part15.407(g) requirements, and the
manufacturer states that their transmissions remain within the U-NII-1, U-NII
2A, U-NII 2C and U-NII-3 bands. Pour le Canada : La stabilité de fréquence de
toutes les fréquences de transmission de U-NII-1, U-NII 2A, U-NII 2C et
U-NII-3 est conforme aux exigences 47 CFR FCC Part15.407(g), et le fabricant
déclare que leurs transmissions restent dans les bandes U-NII-1, U-NII 2A,
U-NII 2C et U-NII-3.
Warning The device has been evaluated to meet general RF exposure requirements
RF Exposure Information: This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance 20cm between the radiator and
your body.
-20-