Jackery JS-100C SolarSaga 100W Solar Panel User Guide

**Jackery JS-100C SolarSaga 100W Solar Panel User Guide

**

TECHNICAL PARAMETERS

SAFETY TIPS

• Do not bend or flex the folding solar panels.
• Do not place folding solar panels in shaded places, while tree shades, buildings, and any other obstructions to sunlight should be minimized.
• Do not soak the solar panels in water or other liquid.
• Do not clean the solar panel with water; please gently wipe it with a damp cloth.
• Do not use or store solar panels near open flames or flammable materials.
• Do not scratch the surface of solar panels with sharp objects.
• Prevent corrosive substances coming into contact with solar panels.
• Do not step on or place heavy objects on the solar panels.
• Do not disassemble the solar panels.
• The output circuit of the solar panels must be correctly connected to the equipment.
• Do not short-circuit the positive and negative poles of the panel.
• Ensure that there is no gap between the connector and the insulated connector as this may cause arcing or electrical shock.
• Check the connection status of each component carefully, including cables, wires and plugs.

How to use

Tip: The cable comes with an adapter that allows it to connect to any Jackery portable power station.

1. DC7909 connector: suitable for the DC input port of Jackery portable power station (diameter: 8.0 mm).
2. DC7909-DC8020 adapter: suitable for the DC input port of Jackery portable power station (diameter: 8.1 mm).

* DC7909 connector:

1. Open the zipper on the inside of the carrying case bag and take out the cable,
2. Connect the cable to the solar panel and the DC input port of the portable power station.

* DC7909-DC8020 Adapter:

When using the adapter

1. Open the zipper on the inside of the carrying case bag, take out the cable and connect it to the adapter,
2. Connect the cable directly to the solar panel and the DC input port of the portable power station.

When using the connector

1. Open the zipper on the inside of the carrying case bag, take out the cable and connect it to the adapter,
2. Connect the two connecting cables to the two holes of the connector respectively,
3. After connecting with two solar panels, connect the connector to the DC input port of the portable power station.

• To maximize the power generation, adjust the orientation of SolarSaga 100 throughout the day to ensure full exposure of the panel surface to direct sunlight.
• The solar panel connector may be optional or standard depending on the model of each portable power station. Please refer to the official website and user manual for more details.

Sun Angle Indicator

The carry handle has a sun angle indicator. When sunlight hits its surface, a shadow will appear at its bottom.

If the shadow falls on the white inner circle at its bottom, it means that the solar panel is facing directly towards sun and you can get optimal power generation; if not, it is suggested to adjust its angle until it does.

WARRANTY

The product is covered by a limited warranty from Jackery for the original purchaser that covers the product from defects in workmanship and materials for 24 months from the date of purchase ( damages from normal wear and tear, alteration, misuse, neglect, accident, service by anyone other than authorized service center, or act of God are not included ).

During the warranty period and upon verification of defects, this product will be replaced when returned with proper proof of purchase.

FREQUENTLY ASKED QUESTIONS

Q: What kind of battery can be charged by these solar modules?

1. Jackery Explorer series 2. Sealed lead-acid battery 3. Colloidal lead-acid batteries 4. The open lead-acid batteries

Q: How to clean the solar surface?

Dust and dirt on the surface should first be removed using a soft brush. Use a damp cloth to wipe the surface of the solar module to remove any remaining dust or dirt. Any guano or other adhesive should be removed as soon as possible from the solar surface to avoid a reduction in performance

Q: Are the foldable solar modules waterproof?

To Maximize the lifespan of the module, it should not get wet.

CONTACT US

For any inquiries or comments concerning our products, please send an email to hello.eu@jackery.com, and we will respond to you as soon aspossible. If there is any quality related issue with the product, you may request a replacement or refund by submitting a request form at www.jackery.com/support/.

CUSTOMER SERVICE

24-month limited warranty

Lifetime technical support

hello.eu@jackery.com

Manufacturer/Factory: Shenzhen Hello Tech Energy Co.,Ltd.

Jiaanda Science and technology industrial park, the east side of Huafan Road, Tongsheng Community, Dalang
Street, Longhua District, Shenzhen, Guangdong, China

References

• Jackery Best Solar Generator, Portable Power Station & Solar Panels

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>