Shure GLX-D Dual Band Frequency Manager Specifications and Datasheet
- June 13, 2024
- Shure
Table of Contents
Shure GLX-D Dual Band Frequency Manager
Rock-solid RF performance for multiple system installations
Groundbreaking GLX-D® Advanced Digital Wireless systems enable exceptional digital audio clarity, intelligent rechargeability and seamless operation—available in rack mount receiver system configurations for use with GLX-D Advanced Frequency Managers and accessories for small-to-medium installations.
PRODUCT HIGHLIGHTS
Automatic Frequency Management
2.4 GHZ frequency band
Operate up to 9 compatible systems in typical setting, up to 11 maximum under
ideal conditions
Legendary Shure audio quality and rugged construction
System Specifications
Compatibility| Operate up to 9 compatible systems in typical setting, up to 11
maximum under ideal conditions
---|---
System Operating Range| Indoors: Up to 100 feet (30 m) typical, with a maximum
of 200 feet (60 m) under ideal conditions
Outdoors: Up to 65 feet (20 m) typical, with a maximum of 165 feet (50 m)
under ideal conditions
Transmit Mode| Shure Propietary Digital
Audio Frequency Response| 20 Hz – 20 kHz Note: Dependent on microphone type
Dynamic Range| 120 dB, A-weighted
Latency| Groups 1 and A:
4.0 ms
| Groups 2, 3, 4 and B:
7.3 ms
RF Sensitivity| -88 dBm, typical|
Total Harmonic Distortion| 0.2%, typical|
RF Output Power| 10 mW E.I.R.P. max
Operating Temperature Range| -18°C (0°F) to 57°C (135°F) Note: Battery
characteristics may limit this range.
Storage Temperature Range| -29°C (-20°F) to 74°C (165°F)
Polarity| Positive pressure on microphone diaphragm (or positive voltage
applied to tip of WA302 phone plug) produces
positive voltage on pin 2 (with respect to pin 3 of low-impedance output) and the tip of the high impedance 1/4-inch output.
Battery Life| Up to 16 hours|
| NOTE: All Specifications are subject to change. Performance may vary
depending on country regulations and operating environment.
Optional Accessories and Replacement Parts
PA805Z2- RSMA| Passive Directional Antenna 2.4 GHz| PS60|
Power Supply (UA846Z2)| UA802- RSMA| 0.6 m (2 ft.) Reverse SMA Cable
---|---|---|---|---|---
UA8- 2.4GHZ| 1/2 Wave Antenna, 45 deg. (2.4 GHz)| PS43| Power
Supply (GLXD4R)| UA806- RSMA| 1.8 m (6 ft.) Reverse SMA Cable
UA505- RSMA| Wall Mount for PA805-RSMA or UA8-2.4 GHz| SB902|
Lithium Ion Rechargeable Battery| UA825- RSMA| 7.6 m (25 ft.)
Reverse SMA Cable
UA221- RSMA| Reverse SMA Passive Antenna Splitter| SBC10-
USB| Micro-USB Battery Charger| UA850- RSMA| 15.2 m (50 ft.)
Reverse SMA Cable
95A32436| Reverse SMA Bulkhead Adapters| SBC10- 902|
Standalone Single Battery Charger| UA8100- RSMA| 30.4 m (100 ft.)
Reverse SMA Cable
| | SBC- CAR| Car Battery Charger| |
Component Specifications
GLX-D Advanced Passive Directional Antenna (PA805Z2-RSMA)
The GLX-D Advanced Passive Directional Antenna (PA805Z2-RSMA ) is considered a key part of any GLX-D Advanced Digital Wireless installation. These antennas both improve reception of GLX-D transmitter signals and minimize interference from any 2.4GHz sources near receivers with appropriate installed placement.
GLX-D Advanced Passive Directional Antenna (PA805Z2-RSMA)
Frequency Range
<2:1 Voltage Standing Wave Ration (VSWR)
| 2050 to 2700 MHz
---|---
Antenna Gain
@ 2.45 GHz, typical
| 8 dBi
3 dB Horizontal Beam Width| 100 degrees
Efficiency
@2.45 GHz, typical
| 89%
Impedance| 50 Ω
Polarization| Linear
Front-to-back ratio
@2.45 GHz, typical
| 24 dB
Connector Type| Reverse SMA
Dimensions| 105 × 164 × 27.5 mm (4.1 × 6.5 × 1.1 in.) H × W × D
Net Weight| 2.5 oz. (70 g)
GLX-D Advanced Frequency Manager (UA846Z2)
Power Requirements| 15 VDC| |
---|---|---|---
DC Output| 15 VDC (×6)| |
Output Current
Combined total from all DC outputs
| 3.8 A, maximum| |
Operating Temperature Range| −18 °C to 63 °C (0 °F to 145 °F)|
Dimensions| 45 × 483 × 192 mm (1.8 × 19 × 7.6 in) H × W × D|
Net Weight| 1.63 kg (3.6 lbs)| |
RF Input
| | ****
RF Output
|
Connector Type| Reverse SMA| Connector Type| Reverse SMA
RF Frequency Range| 2400 to 2483.5 MHz| RF Frequency Range| 2400 to 2483.5 MHz
Receiver Port Isolation| 35 dB, typical| Output Intercept Point (OIP3)| 48
dBm, typical
Impedance| 50 Ω| Impedance| 50 Ω
Maximum Antenna Input Power| −10 dBm| Reverse Isolation
Output to Input
| 35 dB, typical
Maximum Receiver Port Input Power| +15 dBm| Gain
Input to any output port
| −3 to 0 dB
GLXD4R Rack Mount Receiver
| Dimensions | 42 × 197 × 163 mm (1.7 × 7.8 × 6.4 in.) H × W × D |
|---|---|
| Weight | 907.2 g (32 oz.) without batteries |
| Housing | Steel |
| Power Requirements | 14 to 18 VDC (tip positive with respect to ring), 550 mA |
| Spurious Rejection | >35 dB, typical |
| Gain Adjustment Range | −18 to 42 dB in 1 dB steps |
| Phantom Power Protection | Yes |
Audio Output
| |
Configuration| XLR Output| Balanced
6.35 mm (1/4″) output| Impedance balanced
Impedance| XLR Output| 100 Ω
6.35 mm (1/4″) output| 100 Ω (50 Ω, Unbalanced)
Full-Scale Output| XLR| LINE setting= +18 dBV, MIC setting= −12 dBV
6.35 mm (1/4″)| +12 dBV
Pin Assignments| XLR Output| 1=ground, 2=hot, 3=cold
6.35 mm (1/4″) connector| Tip=audio, Ring=no audio, Sleeve=ground
Mic/Line Switch| 30 dB Pad|
Receiver Antenna Input| |
Impedance| 50 Ω|
Antenna Type| ½ Wave Sleeve Dipole|
Maximum Input Level| −20 dBm|
GLXD1 Bodypack Transmitter
Dimensions| 90.4 x 64.5 x 22.9 mm (3.56 x 2.54 x 0.90 in.), H x W x D (without
antenna)
---|---
Power Requirements| 3.7 V Rechargeable Li-Ion
Housing| Cast Metal, Black Powdercoat
Input Impedance| 900 kΩ
RF Output Power| 10 mW E.I.R.P. max
Transmitter Input|
Connector| 4-Pin male mini connector (TA4M)
Configuration| Unbalanced
Maximum Input Level
(1 kHz at 1% THD)
| −8.4 dBV (7.5 Vp-p)
Antenna Type| Internal Monopole
Pin Assignments
TA4M
| 1: Ground (cable shield) 2: + 5 V Bias
3: Audio
4: Tied through active load to ground (On instrument adapter cable, pin 4 floats)
GLXD2 Handheld Transmitter
Dimensions| | | |
---|---|---|---|---
**| Model| A| B| C**
SM58| 51 mm, 2.0 in.| 252 mm, 9.9 in.| 37 mm, 1.5 in.
BETA 58| 51 mm, 2.0 in.| 252 mm, 9.9 in.| 37 mm, 1.5 in.
SM86| 49 mm, 1.9 in.| 252 mm, 9.9 in.| 37 mm, 1.5 in.
BETA87A| 51 mm, 2.0 in.| 252 mm, 9.9 in.| 37 mm, 1.5 in.
Weight| |
| SM58| 267 g (9.4 oz.) without batteries|
| BETA 58| 221 g (7.8 oz.) without batteries|
| SM86| 275 g (9.1 oz.) without batteries|
| BETA87A| 264 g (9.3 oz.) without batteries|
| | |
Housing| Molded Plastic|
Power Requirements| 3.7 V Rechargeable Li-Ion|
RF Output Power| 10 mW E.I.R.P. max|
Maximum Input Level| 145 dB SPL|
FREQUENTLY ASKED QUESTIONS
What is the Shure GLX-D Dual Band Frequency Manager?
The Shure GLX-D Dual Band Frequency Manager is a wireless microphone system accessory that helps optimize and manage frequencies for GLX-D wireless systems in congested RF environments.
What does the GLX-D Dual Band Frequency Manager do?
It efficiently scans and selects the best available frequencies to ensure interference-free operation of GLX-D wireless microphones.
Is the GLX-D Dual Band Frequency Manager compatible with other Shure wireless systems?
No, it is specifically designed for use with Shure GLX-D wireless systems.
How many GLX-D wireless systems can the Frequency Manager support?
The GLX-D Dual Band Frequency Manager can support up to nine compatible GLX-D wireless systems.
Does the Frequency Manager operate in both the 2.4GHz and UHF bands?
Yes, it operates in both the 2.4GHz and UHF bands, allowing for flexible frequency management.
Is the Frequency Manager rack-mountable for professional installations?
Yes, it is rack-mountable, making it suitable for integration into professional audio setups.
How does the Frequency Manager avoid interference in crowded RF environments?
It scans for clean frequencies and automatically selects the best available channels to avoid interference from other wireless devices.
Can I use the Frequency Manager with multiple antennas for enhanced reception?
Yes, you can connect multiple antennas to the Frequency Manager to improve reception and coverage.
Does it include software for monitoring and control of the wireless systems?
The Frequency Manager may include software for advanced monitoring and control of connected GLX-D wireless systems.
What is the range of the GLX-D Dual Band Frequency Manager?
The range of the Frequency Manager can vary depending on the environmental conditions, but it typically covers a considerable area.
Does it support frequency coordination for multiple Frequency Managers in the same setup?
Yes, you can coordinate frequencies between multiple Frequency Managers for larger and more complex wireless setups.
Is there a built-in display for monitoring frequencies and settings?
Yes, it includes a built-in display for monitoring and configuring settings.
How do I connect the Frequency Manager to my GLX-D wireless systems?
You connect the Frequency Manager to your GLX-D wireless systems using appropriate audio and antenna cables.
Can I use the Frequency Manager for live sound reinforcement and broadcasting?
Yes, it is suitable for live sound reinforcement, broadcasting, and other professional audio applications.
Does the Frequency Manager require any special setup or calibration?
It may require initial setup and calibration to optimize its performance, which is typically outlined in the user manual.
VIDEO – PRODUCT OVERVIEW
DOWNLOAD THE PDF LINK:Shure GLX-D Dual Band Frequency Manager Specifications and Datasheet
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>