Cylinda FT6274B Washing Machines User Manual

Cylinda FT6274B Washing Machines

Product Information

Product Usage Instructions

Safety Instructions

1. Intended Use
   Ensure the product is used for its intended purpose.

2. Safety of Children, Vulnerable Persons and Pets
   Take necessary safety precautions to protect children, vulnerable persons, and pets.

3. Electrical Safety
   Follow electrical safety guidelines while using the product.

4. Handling Safety
   Handle the product with care to avoid accidents or damage.

5. Installation Safety
   Follow the recommended installation procedures to ensure safety.

6. Operational Safety
   Operate the product safely by following the instructions provided.

7. Maintenance and Cleaning Safety
   Take necessary precautions while performing maintenance and cleaning tasks.

Important Instructions for Environment

1. Compliance with WEEE Directive
   Ensure compliance with the WEEE Directive for proper disposal of the product.

2. Package Information
   Refer to the package information for details about the product.

Technical Specifications

Refer to the user manual for detailed technical specifications of the product.

Installation

1. Appropriate Installation Location
   Select an appropriate location for installing the product.

2. Assembly of Bottom Panel Covers
   Follow the instructions provided to assemble the bottom panel covers.

3. Removing Transportation Safety Bolts
   Remove the transportation safety bolts before using the product.

4. Connecting to Water Supply
   Connect the product to the water supply as instructed.

5. Connecting the Drain Hose to the Drain
   Connect the drain hose to the drain outlet properly.

6. Adjusting the Stands
   Adjust the stands of the product for proper stability.

7. Electrical Connection
   Make the electrical connections according to the provided instructions.

8. Start Up
   Follow the startup procedure to initialize the product.

Preliminary Preparation

1. Sorting the Laundry
   Sort the laundry before loading it into the product.

2. Preparing Laundry for Washing
   Prepare the laundry for washing by following the provided instructions.

3. Tips for Energy and Water Saving
   Follow the tips provided to save energy and water while using the product.

4. Loading the Laundry
   Properly load the laundry into the product.

5. Correct Load Capacity Ensure the correct load capacity is not exceeded while loading
   the laundry.

6. Using Detergent and Softener
   Use the appropriate amount of detergent and softener as instructed.

7. Tips for Efficient Washing
   Follow the provided tips for efficient washing.

8. Displayed Programme Duration
   Refer to the display for information about the duration of the selected program.

Operating the Product

1. Control Panel
   Familiarize yourself with the control panel and its functions.

2. Symbols on the Display
   Understand the symbols displayed on the product’s display.

3. Programme and Consumption Table
   Refer to the programme and consumption table for information about different programs.

4. Programme Selection
   Select the desired program using the provided controls.

5. Programmes
   Choose from the available programs for washing.

6. Temperature Selection
   Select the desired temperature for washing.

7. Spin Speed Selection
   Select the desired spin speed for washing.

8. Auxiliary Function Selection
   Select auxiliary functions as required for the washing program.

9. End Time
   Set the desired end time for the washing program.

10. Starting the Programme
    Start the selected program to begin washing.

11. Loading Door Lock
    Ensure the loading door is properly locked before starting the program.

12. Changing the Selections After Programme has Started
    Make changes to program selections only if necessary and allowed.

13. Cancelling the Programme
    Cancel the running program if required.

14. End of Programme
    Wait for the end of the program before unloading the laundry.

Maintenance and Cleaning

1. Cleaning the Detergent Drawer
   Clean the detergent drawer regularly as instructed.

2. Cleaning the Loading Door and the Drum
   Clean the loading door and drum using the recommended methods.

3. Cleaning the Body and Control Panel
   Clean the body and control panel of the product appropriately.

4. Cleaning the Water Intake Filters
   Clean the water intake filters to ensure proper functioning of the product.

5. Draining Remaining Water and Cleaning the Pump Filter
   Drain any remaining water and clean the pump filter regularly.

Troubleshooting

Refer to the user manual for troubleshooting information in case of issues with the product.

DISCLAIMER / WARNING

Read the disclaimer and warning section carefully before using the product.

Please read this user manual first!

User manual
FT6274B

Please read this user manual first!
Dear Customer, Thank you for choosing Cylinda product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product. Follow all warnings and information in the user manual. Thus, you protect yourself and your product against possible dangers. Keep the user manual. If you hand over the product to someone else, provide the user manual as well. Warranty terms, usage and troubleshooting methods of your product are in user guide. Symbols and Definitions The following symbols are used in the user guide:
Danger that could result in death or injury. Important information or useful hints about usage. Read the user manual. Recyclable materials.
Hot surface warning. WARNING Danger that may result in property damage to the product or its environment.
EN / 3

Safety Instructions

This section includes the safety instructions necessary to prevent the risk of personal injury or material damage. Our company shall not be held responsible for damages that may occur if these instructions are not observed. · Installation and repair opera-
tions shall always be performed by Authorised Service. · Use original spare parts and accessories only. · Do not repair or replace any component of the product unless it is clearly specified in the user manual. · Do not modify the product.
1.1 Intended Use
· The product’s bench life is 10 years. During this period, original spare parts will be available to operate the appliance properly.
· This product has been designed for domestic use. It is not for commercial purposes or it should not be used out of its intended use.
· The product must only be used for washing and rinsing of laundry that are marked accordingly

· This appliance is intended to be used in household and similar applications. For example;
­ Personnel kitchens of stores, offices and other work environments;
­ Ranches,
­ By customers of hotels, motels and other accommodation facilities,
­ Bed and breakfasts, hostellike environments,
­ Common areas of apartment blocks or laundries.
1.2 Safety of Children, Vulnerable Persons and Pets
· This product may be used by children aged 8 years and older and persons with underdeveloped physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a the product safe way and the hazards involved.
· Children under the age of 3 should be kept away unless continuously supervised.

EN / 4

· Electrical products are dangerous for children and pets. Children or pets should not play with, climb on top or inside the product. Check inside the product before use.
· Use child lock to prevent children from intervening with the product.
· Do not forget to close the loading door when leaving the room where the product is located. Children and pets may get locked inside and drown.
· Children should not perform cleaning and user maintenance works without an adult’s supervision.
· Keep the packaging materials away from children. Risk of injury and suffocation.
· Keep all detergents and additives used for the product away from children’s reach.
· Cut the power cable and break and deactivate the locking mechanism of the loading door before disposing of the product for children’s safety.
1.3 Electrical Safety
· Product should be unplugged during installation, maintenance, cleaning and repair procedures.

· If the power cable is damaged, it must be replaced by the authorised service in order to avoid possible risks.
· Do not tuck the power cable under and behind the product. Do not place heavy objects on the power cable. Do not over bend, crush and touch the power cable to sources of heat.
· Do not use an extension cord, multi-plug or adaptor to operate your product.
· The plug shall be easily accessible. If this is not possible, a mechanism that meets the electrical legislation and that disconnects all terminals from the mains (fuse, switch, main switch, etc.) shall be available on the electrical installation.
· Do not touch the plug with wet hands.
· When unplugging the appliance, don’t hold the power cord, but the plug.
· Make sure the plug is not wet, dirty or dusty.
1.4 Handling Safety
· Unplug the product before moving, remove the water outlet and water main connections. Drain any water left inside the product.

EN / 5

· The product is heavy, do not move alone. Do not hold extruding parts such as the laundry loading door to lift and move the product. The upper tray should be tightly fixed for moving.
· Your product is heavy; it should be carried carefully by two people if a staircase is involved. It may cause injuries if your product falls on you. Do not hit and drop the product while carrying.
· Carry the product in an upright position.
· Make sure that the hoses as well as the power cable are not folded, pinched or crushed after the product is fitted into its place after installation or cleaning procedures.
1.5 Installation Safety
· Check the information on the manual and installation instructions to prepare the product for installation and make sure the electrical mains, clean water mains and water outlet are suitable. If not, call a qualified electrician and plumber to have them make the necessary arrangements. These operations are the responsibility of the customer.

· Check for any damage on the product before installing it. Do not have the product installed if it is damaged.
· Injuries may occur if hands are put into uncovered slots. Close the holes of the transportation safety bolts with plastic plugs.
· Do not install or leave the product at locations where it may be exposed to external environment conditions.
· Do not install the product at locations where the temperature drops below 0 ºC.
· Do not place the product on a carpet or similar surface. It would create fire hazard since it cannot receive air from underneath.
· Place the product on a level and hard surface and balance with the adjustable legs.
· Connect the product to a grounding plug protected by a fuse suitable to the current values on the type label. Make sure the grounding is carried out by an expert electrician. Do not use the product without suitable grounding to local/national regulations.
· Plug the product in a socket with voltage and frequency values suitable to those indicated on the type label.

EN / 6

· Do not plug the product to loose, broken, dirty, greasy sockets or sockets that has come out their seats or sockets with a risk of water contact.
· Use the new hose set provided with the product. Do not re-use old hose sets. Do not make additions to the hoses.
· Connect the water inlet hose directly to the water tap. The pressure from the tap should be minimum 0.1 MPa (1 bar) and maximum 1MPa (10 bars). 10 to 80 litres of water should be running from the tap in a minute in order for the product to function properly. If the water pressure is above 1 MPa (10 Bars), a pressure-reducing valve should be fitted. The maximum allowed temperature is 25°C.
· Fit the end of the water discharge hose to the dirty water discharge drain, the sink or the bathtub.
· Place the power cable and houses in locations without risk of tripping.
· Do not install the product behind a door, a sliding door or at another location that will prevent the door from opening completely.

· If a drier is to be placed on the product, fix with a suitable connection apparatus obtained from the authorised service.
· There is a risk of contact with electrical pieces when the upper trays is removed. Do not dismantle the upper tray of the product.
· Place the product at least 1 cm away from the edges of furniture.
1.6 Operational Safety
· When you are using the appliances, use only detergents, softeners and supplements suitable for washing machines.
· Do not use chemical solvents on the product. These materials contain an explosion risk.
· Do not operate defective or damaged products. Unplug the product (or turn off the fuse it is connected to), turn off the water tap and call an authorised service.
· Do not place sources of ignition (burning candle, cigarettes, etc.) or sources of heat (irons, furnaces, ovens, etc.) on top of or near the product. Do not put inflammable/explosive materials near the product.
· Do not get on the product.

EN / 7

· Unplug the product and turn off the tap if you will not be using the product for long periods.
· Detergent/maintenance materials may splash out of the detergent drawer if it is opened while the machine is working Contact of the detergent with your skin and eyes is dangerous.
· Make sure pets do not climb inside the product. Check inside the product before use.
· Do not force open the locked loading door. The door will open once the washing is completed. If the door does not open, use the solutions for “loading door does not open” error in the Troubleshooting section.
· Do not wash elements contaminated with gasoline, kerosene, benzene, reducers, alcohol or other inflammable or explosive materials and industrial chemicals.
· Do not directly use dry cleaning detergent and do not wash, rinse or spin laundry contaminated with dry cleaning detergent.
· Do not place your hands into the rotating drum. Wait until the drum no longer rotates.

· Do not place your hand or a metal object under the washing machine.
· If washing laundry at high temperatures, the discharged washing water would burn your skin if in contact with your skin, for ex. when the discharge hose is connected to the tap. Do not touch the discharge water.
· Take the following precautions to prevent formation of biofilm and malodours:
­ Make sure the room where the washing machine is placed is well ventilated.
­ Wipe the door gasket and loading door glass with a dry and clean cloth at the end of the programme.
· The glass of the loading door will heat up when washing at high temperatures. Therefore, do not touch the loading door glass while washing, especially children.
1.7 Maintenance and Cleaning Safety
· Do not wash the product with pressure washers, by spraying vapour, water or pouring water.

EN / 8

· Do not use sharp or abrasive tools to clean the product. Do not use household cleaners, soap, detergent, gas, gasoline, thinner, alcohol, varnish, etc. while cleaning.
· Cleaning agents containing solvents might reek poisonous fumes( for ex. cleaning solvent. Do not use cleaning products containing solvents.

· There may be detergent residues in the detergent drawer when you open it for cleaning.
· Do not dismantle the filter of the discharge pump while the product is running.
· The temperature in the machine may rise up to 90ºC. Clean the filter after the water in the machine cools down in order to avoid risk of getting burnt.

2 Important Instructions for Environment

2.1 Compliance with WEEE Directive
This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE). This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling. Do not dispose of the waste product with normal domestic and other wastes at the end of its service life. Take it to the collection center for the recycling of electrical and electronic equipment. Please consult your local authorities to learn about these collection centers.

Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.

Compliance with RoHS Directive: The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive.
2.2 Package Information
Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment
EN / 9

3 Technical Specifications
Supplier’s name or commercial brand
Model name
Nominal Capacity (kg) Maximum spin speed (cycle/min) Built-In Height (cm) Width (cm) Depth (cm) Single Water inlet / Double Water inlet Electrical connection (V/Hz) Total current (A) Total power (W) Main model code

CYLINDA FT6274B 7178554500
7 1400 No 84,5
60 55 + / 230 V / 50 Hz 10 2200 1620
The model information as stored in the product database can be reached by entering following website and searching for your model identifier (*) found on energy label. https://eprel.ec.europa.eu/

EN / 10

Installation

Please read the “Safety Instructions” section first!
Your washing machine automatically detects the amount of laundry placed inside when selecting a program. While installing the product, before the first use, calibration should be done to ensure that the laundry amount is detected in the most accurate way. To do this, select the Drum Cleaning program and cancel the spin function. Start the program without laundry. Wait for the program to finish, which will take about 15 minutes. The program name may vary depending on the model. For the appropriate program selection, review the program descriptions section.
· Please contact the nearest Authorised Service for the installation of the appliance.
· Make sure that the installation and electrical connections of the product are performed by authorised service agent. Manufacturer shall not be held responsible for damages caused by operations performed by unauthorised persons.
· Preparation of the location and electrical, tap water and waste water installations at the place of installation is under customer’s responsibility.
· Make sure that the water inlet and discharge hoses as well as the power cable are not folded, pinched or crushed while pushing the product into its place after installation or cleaning procedures.
· Prior to installation, visually check if the product has any defects on it. Do not have the product installed if it is damaged. Damaged products cause risks for your safety.

4.1 Appropriate Installation Location
· Place the product on a hard and level floor. Do not place it onto a carpet with high pile or other similar surfaces. Placing on an improper floor shall cause noise and vibration problems.
· Total weight of the washing machine and the dryer -with full load- when they are placed on top of each other reaches to approx. 180 kilograms. Place the product on a solid and flat floor that has sufficient load carrying capacity.
· Do not place the product on the power cable.
· Do not install the product at places where temperature may fall below 0 ºC. Freezing might damage your product.
· Leave a minimum space of 1 cm between the product and the furniture.
· If you will install the product on a surface with steps, never place it close to the edge.
· Do not place the product on any platform. · Do not place heat sources such as
cooker, irons, ovens, heater etc. on the appliance and do not use them on the product.
4.2 Assembly of Bottom Panel Covers
With some models, the base parts of the products are completely closed. These products do not have plugs and covers.
· In order to increase the sound comfort of the product, attach cover A after removing the package foam.

EN / 11

Cover A

3. Attach the plastic covers supplied in the User Manual bag into the holes on the rear panel.

Tilt the machine back slightly. Rest the tabs of Cover A against the lower panel. Complete the assembly by rotating the cover. · Cover B and the Cap are optional. If avail-
able, attach cover B and the Cap. Cover B
Rest the tabs of Cover B against the lower panel. Complete the assembly by rotating the cover. Cap
Insert the cap by pushing it with your finger. 4.3 Removing Transportation Safety
Bolts 1. Loosen all transportation safety bolts
with an appropriate wrench until they turn freely. 2. Bend the inner part by pressing it at the grip areas and pull the part out.

NOTICE Remove the transportation safety bolts before operating the product. Otherwise, the product will get damaged.
NOTICE Keep the transportation safety bolts in a safe place to reuse when the product needs to be moved again in the future. Install the transportation safety bolts in reverse order of the disassembly procedure. Never move the product without the transportation safety bolts properly fixed in place.
4.4 Connecting to Water Supply
NOTICE Models with a single water inlet shall not be connected to the hot water tap. In such a case the laundry will get damaged or the product will switch to protection mode and will not operate. Do not use old or used water inlet hoses on a new product. It may cause water leakage from your machine and stain your laundry.
1. Tighten all hose nuts by hand. Never use a tool when tightening the nuts.
2. Open the taps completely after making the hose connection to check for water leaks at the connection points. If any leak occurs, turn off the tap and remove

EN / 12

the nut. Check the gasket and tighten the nut carefully again. In order to prevent the water leaks and resultant damages, keep the taps closed when you do not use the product.
4.5 Connecting the Drain Hose to the Drain
1. Attach the end of the drain hose directly to waste water drain, washbasin or bathtub.
Your house will be flooded if the water draining hose is dislocated during water draining. There is also a risk of burning due to the high washing temperatures. In order to prevent such situations and make sure that the product performs water intake and drain processes without any problem, fix the drain hose securely.
2. Connect the drain hose to a minimum height of 40 cm and a maximum height of 100 cm.
3. Installing the water draining hose at ground level or close to the floor (40 cm below) and then raising it makes water discharge difficult and the laundry may come out extremely wet. Thus, follow the heights provided in the figure.

4. To prevent the waste water to go back into the product again and to ensure easy drainage, do not immerse the end of the hose into the waste water or do not insert it into the drain for more than 15 cm. If it is too long, cut it short.
5. The end of the hose should not be bent, it should not be stepped on and the hose must not be pinched between the drain and the product. Otherwise, water discharge issues may emerge.
6. If the length of the hose is too short, use it by adding an original extension hose. The overall length of the hose shall not be longer than 3.2 m. To prevent water leaks, always secure the connection between the extension hose and the draining hose of the product with a suitable clamp so that it does not come off and cause leaks.
4.6 Adjusting the Stands
WARNING In order to ensure that the product operates more silently and vibration-free, it must stand level and balanced on its feet. Ensure that the product is balanced by adjusting the feet. Otherwise, the product may move from its place and cause crushing, noise and vibration problems. To avoid damaging the lock nuts, do not use any tools to loosen the nuts.
1. Loosen the lock nuts on the feet by hand.
2. Adjust the feet until the product stands level and balanced.
3. Tighten all lock nuts again by hand.

EN / 13

Electrical Connection
Connect the product to a grounded outlet protected by a 16 A fuse. Our company shall not be responsible for the damages that shall be incurred due to using the product without grounding according to local regulations. · Connection must comply with national
regulations. · The electrical connection cable infra-
structure of the product must be adequate and suitable for product requirements. It is recommended to use a residual current device. · Power cable plug must be within easy reach after installation. · If the current supply to the fuse or breaker in the house is less than 16 Amps, have a qualified electrician install a 16 amp supply. · The voltage specified in the “Technical specifications” section must be equal to your mains voltage. · Do not make connections via extension cables or multi-plugs. Overheating and burning may occur due to the connecting cable.
5 Preliminary Preparation
Please read the “Safety Instructions” section first!
5.1 Sorting the Laundry
· Sort laundry according to type of fabric, colour, and degree of soiling and allowable water temperature.
· Always observe the instructions given on the garment care labels.
5.2 Preparing Laundry for Washing
· Laundry items with metal attachments such as, underwiring, belt buckles or metal buttons will damage the product. Remove the metal pieces or wash such clothes by putting them in a laundry bag or pillow case.

Damaged power cables should be replaced by the authorised service in order to prevent possible danger.
4.8 Start Up Before starting to use the product make sure that the preparations described in section “Environmental instructions” and “Installation”. To prepare the product for washing laundry, perform first operation in Drum Cleaning programme. If this programme is not available in your product, apply the method which is described in section “Cleaning the loading door and the drum”.
Some water has remained in the product due to the quality control processes in the production. It is not harmful for the product.
· Take out all substances in the pockets such as coins, pens and paper clips, and turn pockets inside out and brush. Such objects may damage the product or cause noise problem.
· Put small size clothes such as infant’s socks and nylon stockings in a laundry bag or pillow case.
· Place curtains in without compressing them. Remove curtain attachment items. Curtain attachment items may cause pulling and tearing on the curtain.
· Fasten zippers, sew loose buttons and mend rips and tears.
· Wash “Machine washable” or “Hand washable” labelled products only with an appropriate programme.

EN / 14

· Do not wash colours and whites together. New, dark coloured cottons release a lot of dye. Wash them separately.
· Tough stains must be treated properly before washing.
· Wash trousers and delicate laundry turned inside out.
· Laundry that are subjected to materials such as flour, lime dust, milk powder, etc. intensely must be shaken off before placing into the product. Such dusts and powders on the laundry may build up on the inner parts of the product in time and can cause damage.

the programme is completed. Then you can open the loading door. If the door does not open, apply the solutions provided for “Loading door cannot be opened” error in the Troubleshooting section.
5.5 Correct Load Capacity
The maximum load capacity depends on the type of laundry, the degree of soiling and the desired washing programme. The product automatically adjusts the water amount according to the weight of the laundry put inside it.

5.3 Tips for Energy and Water Saving
Following information will help you use the product in an ecological and energy/waterefficient manner. · Operate the product in the highest load
capacity allowed for the programme you have selected, but do not overload. See “Programme and consumption table” · Observe the temperature instructions on the detergent packaging. · Wash slightly soiled laundry at low temperatures. · Use faster programmes for small quantities of lightly soiled laundry. · Do not use prewash and high temperatures for laundry that is not heavily soiled or stained. · If you plan to dry your laundry in a dryer, select the highest spin speed recommended during washing process. · Do not use more detergent than the recommended amount on the detergent packaging.

Follow the instructions in “Programme and consumption table”. When the appliances is overloaded product’s washing performance will drop. Moreover, noise and vibration problems may occur.
5.6 Using Detergent and Softener
WARNING Read the manufacturer instructions on the package while using detergents, softeners, starch, bleach and decolourants, anti-limescale and follow the dosage information provided. Use a measuring cup, if any.

5.4 Loading the Laundry

1. Open the loading door.

2. Put the laundry items into the product in a loose manner.

3. Push the loading door to close until you

hear a locking sound. Ensure that no items are caught in the door. The loading door is locked while a programme is running. The door lock will open once

The detergent drawer comprises of three compartments: (1) for prewash,

(2) for main washing,

EN / 15

(3) for softener,
( ) a syphon piece in the softener compartment,
( ) there is a liquid detergent apparatus for liquid detergent use in the main washing compartment.
Detergent, Softener and Other Cleaning Agents
· Add detergent and softener before starting the washing programme.
· Do not leave the detergent drawer open when the washing programme is on.
· If you are using a programme without pre-washing, do not put detergent in the pre-wash compartment (compartment no. “1”).
· If you are using a program with prewash, start the machine after adding powder detergent to the prewash and main wash compartments (compartments 1 and 2).
· Do not select a programme with prewashing if you are using a detergent pod or dispensing ball. Place the detergent pod or the dispensing ball directly among the laundry in the product.
· If you are using a liquid detergent, follow the directions under “Liquid detergent use” and do not forget to bring the liquid detergent apparatus to the correct position.
Choosing the Detergent type
Detergent type to be used depends on the washing programme, fabric type and colour. · Use different detergents for coloured and
white laundry. · Wash your delicate clothes only with spe-
cial detergents (liquid detergent, wool shampoo, etc.) intended solely for delicate clothes and at suggested programmes. · When washing dark coloured clothes and quilts, it is recommended to use liquid detergent. · Wash woollens at suggested programme with special detergent made specifically for woollens.

· Please review the programme descriptions part for suggested programme for different textiles.
· All recommendations about detergents are valid for selectable temperature range of programmes.
Only detergents, softeners and additives suitable for washing machines should be used. Do not use soap powder.
Adjusting the Detergent Amount
The amount of detergent depends on the amount of laundry, how soiled they are and the water hardness. · Do not exceed the recommended dosage
values on the detergent packaging in order to eliminate excessive foam and poor rinsing problems, to save money and protect the environment. · Use less amounts of detergent for fewer or less soiled laundry. Using Softeners
Put the softener in the softener compartment of the detergent drawer. · Do not exceed the (>max<) level sign in
the softener compartment. · If the softener is not fluid, dilute with wa-
ter before placing in the softener compartment.
WARNING Do not use liquid detergents or other materials with cleaning properties unless they are intended for use in washing machines for softening the laundry.
Using Liquid Detergents
If the Product Has a Liquid Detergent Apparatus
· Press and rotate the apparatus at where it is shown when you want to use liquid detergents. The part falling below will serve as a barrier for liquid detergent.

EN / 16

· Clean with water at its place or by removing from its place when it is necessary. Do not forget to place the apparatus in the main washing compartment (compartment no. “2”) after cleaning.
· The apparatus should be up if you will use a powder detergent. The fan that you would see in this position will mix the powder detergent and help it to dissolve.
Use of Gel and Tablet Detergents · If the detergent is fluid and there is no li-
quid detergent compartment in your product, place the gel detergent in the main washing detergent compartment in first water intake. If your product has a liquid detergent compartment, fill the compartment with detergent before starting the programme. · If the gel detergent is not fluid or is in a capsule liquid tablet, place directly inside the drum before washing. · Put the tablet detergent in the main washing compartment (compartment no. “2”) or directly inside the drum before washing. Using Starch · Put in the liquid starch, powder starch or fabric dye in the softener compartment. · Do not use softener and starch in the same washing programme simultaneously.

· Wipe the inside of the product with a damp and clean cloth after using starch.
Using Anti-Limescale
· When necessary, only use anti-limescale produced for washing machines.
Using Bleach and Decolourants
· Select a programme with pre-washing and add bleach at the start of pre- washing. Do not put detergent in the pre-wash compartment. As an alternative application, select a programme with additional rinsing and add the bleach while the product is receiving water to the detergent compartment in the first rinsing step.
· Do not mix and use bleach and detergent together.
· As bleach may cause skin irritation use only small amounts (1/2 tea cups – approximately 50 ml and rinse the laundry well.
· Do not pour bleach directly onto the laundry.
· Do not use bleach for coloured clothes. · Select a programme with low temperat-
ure washing while using oxygen-based decolourants. · Oxygen-based decolourants can be used together with detergents. However, if it does not have the same viscosity as the detergent, first place the detergent in compartment no. “2” in the detergent drawer and wait for the product to rinse away the detergent during water intake. Add the decolourant to the same compartment while the machine continues taking in water.

5.7 Tips for Efficient Washing

Clothes

Light Colours and Whites

Colours

Black/Dark Col- Delicates/Wool-

ours

lens/Silks

(Recommended temperat- (Recommended temper-

ure range based on soil ature range based on

level: 40-90 °C)

soil level: cool -40 °C)

(Recommended temperature range based on soil level: cool -40 °C)

(Recommended temperature range based on soil level: cool -30 °C)

EN / 17

Soiling Level

It may be necessary to Powder and liquid deter-

pre-treat the stains or per- gents recommended for

form prewash.

colours can be used at

Powder and liquid deter-

gents recommended for Heavily Soiled whites can be used at

(difficult stains such as grass, coffee, fruits and blood.)

dosages recommended for heavily soiled clothes. It is recommended to use powder detergents to clean clay and soil stains

dosages recommended for heavily soiled clothes. It is recommended to use powder detergents to clean clay and soil stains and the stains that are sensitive to bleaches. Detergents

Liquid detergents suitable for colours and black/dark colours can be used at doses recommended for heavily soiled clothes.

Prefer liquid detergents produced for delicate clothes. Woollen and silk clothes must be washed with special woollen detergents.

which do not contain de-

and the stains that are colourant should be

sensitive to bleaches.

used.

Normally Soiled

Powder and liquid detergents recommended for

(For example, whites can be used at stains caused dosages recommended by body on col- for normally soiled lars and cuffs) clothes.

Powder and liquid detergents recommended for colours can be used at dosages recommended for normally soiled clothes. Detergents which do not contain decolourant should be used.

Liquid detergents suitable for colours and black/dark colours can be used at doses recommended for moderately soiled clothes.

Prefer liquid detergents produced for delicate clothes. Woollen and silk clothes must be washed with special woollen detergents.

Lightly Soiled

Powder and liquid detergents recommended for

(No visible stains exist.)

whites can be used at dosages recommended for lightly soiled clothes.

Powder and liquid detergents recommended for colours can be used at dosages recommended for lightly soiled clothes. Detergents which do not contain decolourant should be used.

Liquid detergents suitable for colours and black/dark colours can be used at doses recommended for lightly soiled clothes.

Prefer liquid detergents produced for delicate clothes. Woollen and silk clothes must be washed with special woollen detergents.

5.8 Displayed Programme Duration
You can view the programme duration on the display of your machine while selecting a programme. Depending on the amount of laundry you have loaded into your machine, foaming, unbalanced load conditions, fluctuations in power supply, water pressure and programme settings, the programme duration is automatically adjusted while the programme is running.

SPECIAL CASE: At programme start of Cottons and Cotton Eco programmes, display shows the duration of half load. It is the most common use case. After programme starts, in 20-25 minutes actual load is detected by the machine. And if the detected load is higher than half load; washing programme will be adjusted accordingly and programme duration increased automatically. You can follow this change on the display.

6 Operating the Product

Please read the “Safety Instructions” section first!

EN / 18

6.1 Control Panel

23

4

1

11 10 9 8 7 6 5

1 Programme Selection Button 3 Spin Level Indicator Lights 5 Start/Pause Button 7 Auxiliary Function Button 3 9 Auxiliary Function Button 1 11 Temperature Setting Button

2 Temperature Level Indicator Lights 4 Display 6 End Time Setting Button 8 Auxiliary Function Button 2 10 Spin Speed Adjustment Button

EN / 19

6.2 Symbols on the Display

1

2

3

4

5

6

14 13 12 11 10 9 8

7

1 Temperature Indicator 3 Duration information 5 Programme follow-up indicator 7 Delayed Start Enabled Indicator 9 Child Lock Enabled symbol 11 Auxiliary Function Indicators 1 13 Rinse Hold Indicator
The visuals used for machine description in this section are schematic and may not match exactly with the features of your machine.

2 Spin Speed Indicator 4 Door lock is engaged symbol 6 No Water indicator 8 Auxiliary Function Indicators 3 10 Auxiliary Function Indicators 2 12 No spin indicator 14 Cold Water indicator

EN / 20

6.3 Programme and Consumption Table

Auxiliary functions

Temperature °C Maximum load
(kg) Water consumption (lt) Energy consumption (kWh) Max RPM Skrynkelfritt Tidspar/Intensiv Extra sköljning Ånga Förtvätt

Program

Temperature °C

90 7 95 2,30 1400 · · · · ·

Bomull

60 7 95 1,70 1400 · · · · ·

40 7 94 1,05 1400 · · · · ·

40*** 7 57 0,695 1400

Eco 40-60

40*** 3,5 43 0,475 1400

40*** 2 31 0,295 1400

Syntet

60 3 70 1,35 1200 · · · · · 40 3 68 0,85 1200 · · · · ·

90 7 66 2,10 1400 · · · ·

Snabbtvätt/Expresstvätt 14 min 60 7 66 1,20 1400 · · · ·

30 7 66 0,20 1400 · · · ·

Snabbtvätt/Expresstvätt 14 min + Tidspar/Intensiv

30

2

40 0,15 1400 · · · ·

Ylle/Handtvätt

40 1,5 55 0,50 1200

·

Sport

40 3,5 55 0,50 1200

·

Mixat

40 3,5 85 0,90 800 · ·

··

Trumrengöring

90 – 76 2,33 600

Grovtvätt/Fläckar

60 3,5 82 1,55 1400

·

·

Dunplagg

60 2 89 1,31 800

··

Skjortor/Blusar

60 3 70 1,40 800 · · · * ·

Intensiv/Hygien+

90 7 125 2,80 1400

**

Ånga/Uppfräschning

–

1 1,5 0,11

–

· : Selectable.

• : Automatically selected, cannot be cancelled.
  *** : Eco 40-60 programme is a test programme according to 40 ° C temperature selection, EU regulation EU / 2019/2014 and EN 60456: 2016 / A11: 2020 standard.
  – : See the programme description for maximum load.

Cold – 90 Cold – 90 Cold – 90
40-60 40-60 40-60 Cold – 60 Cold – 60 Cold – 90 Cold – 90 Cold – 90
Cold – 90
Cold – 40 Cold – 40 Cold – 40
90 30-60 Cold – 60 Cold – 60 20-90
–

EN / 21

Please read Installation section of the manual before first use. The auxiliary functions in the table may vary according to the model of your machine. Water and energy consumption may vary subject to the changes in water pressure, water hardness and temperature, ambient temperature, type and amount of laundry, selection of auxiliary functions and spin speed, and changes in electric voltage. Selection patterns for auxiliary functions can be changed by the manufacturer company. New selection patterns can be added or removed. The spin speed of your machine may vary according to the programme; this spin speed cannot exceed the max. spin speed of your machine. The amount of noise and humidity varies according to the spin speed; when the higher spin speed is selected during the spinning phase, the laundry contains less moisture but higher noise occurs at the end of the programme.

You can see the washing duration on the display of your machine while selecting a programme. Depending on the amount of laundry you have loaded into your machine, there may be a difference of 1-1.5 hours between the duration shown on the display and the actual duration of the wash cycle. Duration will be automatically updated soon after the washing starts. Always select the lowest appropriate temperature. The most efficient programmes in terms of energy consumption are generally those that wash at low temperatures for a long time.

Consumption values (EN)

Temperature Selection °C

Tightening Speed (rpm)

Capacity (kg)

Program duration (h:min)

Energy con- Water con-

sumption sumption

(kWh/

(litres/

cycle)

cycle)

Laundry temperature (°C)

40

1400

7

03:27

0,695

57

30

Eco 40-60

40

1400

3,5

02:41

0,475

43

26

40

1400

2

02:41

0,295

31

23

20

1400

7

03:30

0,580

94

20

Bomull

60

1400

7

03:30

1,700

95

60

Syntet

40

1200

3

02:15

0,850

68

40

Snabbtvätt/

Expresstvätt

30

1400

7

00:28

0,200

66

23

14 min

The consumption values given for programs other than the Echo 40-60 program are indicative only.

% Of remaining humidity (%)
53 53 55,9 53,9 53,9 40
62

EN / 22

6.4 Programme Selection
1. Determine the programme suitable for the type, quantity and soiling level of the laundry in accordance with “Programme and consumption table”.
Programmes are limited with the highest spin speed appropriate for that particular type of fabric. When selecting a programme, always consider the type of fabric, colour, degree of soiling and permissible water temperature.
2. Select the desired programme with the Programme Selection knob.
6.5 Programmes
· Eco 40-60 In the ECO 40-60 program, you can wash normally dirty cotton laundry, which is indicated to be washed together at 40°C or 60°C. This programme is the standard test programme according to EU environmentally responsible design and energy labelling legislation. Although this program takes longer to wash than other washing programs, it is more efficient in terms of energy and water consumption. The actual water temperature may differ from the specified wash temperature. When doing laundry in smaller quantities (for example, ½ of capacity or less), the duration of the program stages may be automatically shortened. In this case, energy and water consumption are further reduced. · Bomull Your durable cotton clothes (sheets, linen, towels, bathrobes, underwear, etc.) you can wash it in this program. When the quick wash function button is pressed, the program time is significantly shorter, but ef-

fective wash performance is ensured by intensive wash movements. If the quick wash function is not selected, effective wash and rinse performance is provided for your very dirty laundry.
· Syntet
T-shirt, blouse, synthetic/cotton mixed fabrics, etc. you can wash your clothes in this program. Pressing the quick wash function button significantly shortens the program time and provides effective washing performance for your non-dirty laundry. If the quick wash function is not selected, effective wash and rinse performance is provided for your very dirty laundry.
· Ylle/Handtvätt
Use this program to wash your wool/delicate clothes. Choose the appropriate temperature for the label of your laundry. Your clothes are washed with very delicate movements so that they do not get damaged.
· Intensiv/Hygien+
Applying a steam step at the beginning of the program makes it easy for dirt to soften. This program includes intensive and long washing time and high- temperature anti-allergy and hygienic laundry (baby clothes, linens, linens, underwear, etc.) use it for the wearer. A high level of hygiene is ensured by steam application before the program, long-term heating and additional rinsing steps.
· Dunplagg
Your hairy coats, vests, jackets, etc. with the “machine washable” label on them use this program to wash. Special clamping profiles allow the water to reach the air gaps between the hairs.
· Centrifugering/Tömning
Use this program to remove water from the garment/inside the machine.
· Sköljprogram
Use when you want to rinse or collage separately.

EN / 23

· Ånga/Uppfräschning
Use this program to reduce wrinkles and reduce ironing times on your small, unstained cotton, synthetic or mixed laundry.
This is not a washing program. In this program, you can use detergent, bleach, stain remover, etc. do not add chemicals.
· Skjortor/Blusar
Use this program to wash your cotton, synthetic and synthetic shirts. This program allows the laundry to wrinkle less. Steam is applied at the end of the program to aid the crease reduction function. The steam and special tightening profile applied at the end of the program reduce wrinkles on your shirts. When the quick wash function is selected, the Pre-treatment algorithm is used. · Apply the pre-treatment chemical directly
on the laundry or add the detergent to the machine from the powder detergent compartment with the detergent. In this way, you can achieve the performance you get in a normal wash in a much shorter time. Your shirts will last longer. If you are going to use the time delay function on your machine, do not use the pre-wash chemical. The pre-wash chemical can flow over your laundry, causing stains to form on your laundry. ** It is recommended that you do not wash your shirts with more than 6 shirts to minimize the wrinkle level with this program. at the end of washing when washing at capacities higher than 6 units; differences in the level of wrinkle and the amount of moisture above the shirts can be seen. · Snabbtvätt/Expresstvätt 14 min
Use this program to wash your cotton clothes with very little dirt and spotless in a short time. With the quick wash function selected, the program time can be reduced to up to 14 minutes. If the quick wash function is selected, a maximum of 2 (two) kg of laundry must be washed.

· Trumrengöring
Use regularly (every 1-2 months) to clean the boiler and ensure proper hygiene. Run the program when the machine is completely empty. For better results, use a powder descaler (boiler cleaning agent) suitable for washing machines with the powder detergent function selected. After the program has ended, leave the loading door open to allow the inside of the machine to dry.
This is not a washing program. This is a maintenance program. Do not run this program with anything inside the machine. When you try to start, the machine automatically detects that there is a load inside, you can end the program or continue the program depending on your machine model. Active cleaning will not occur if the program continues.
· Mixat
You can wash your cotton and synthetic clothes on this program without separating them.
· Sport
Use this program to wash outdoor/sports clothing containing a cotton/synthetic mixture and waterproof covers such as Goretex. This program allows you to wash your clothes gently thanks to special rotational movements.
· Grovtvätt/Fläckar
Your machine has a special stain program that ensures the most effective removal of different types of stains. In this program, wash your non- colourful, durable cotton clothes, and never wash delicate and colourful clothes and clothes. Always check the clothing label of the laundry before washing (high temperature cotton shirt, pants, shorts, t-shirt suitable for long periods of washing; baby clothes, pajamas, food apron, tablecloth, sheets, linen, pillow-

EN / 24

case, bath-beach towel, dining towel; socks, cotton underwear, etc. clothes are recommended). In the automatic stain program, you can wash for the 24 types of stain shown below, grouped into three different groups that can be selected with the “fast/intense” setting key. Depending on the selected stain group, a special program is run that has changed the water suppression time, wash rhythm, wash and rinse time. You can find the following groups of stains that can be selected with the “fast/intense” setting key: When “busy” is selected; Sweat, collar dirt, food, mayonnaise, salad dressing, make-up, machine oil, baby food. When “fast/intense” is not selected; Blood, chocolate, pudding, grass, mud, eggs, butter, curry. When “fast” is selected. Tea, coffee, juice, ketchup, red wine, coke, jam, coal
1. Select the stain program.
2. Locate the stain you want to remove from the groups above and select the appropriate group using the Quick/ dense auxiliary function selection button.
3. Read the label on the garment carefully and make sure that the appropriate temperature and tightening speed are selected.
6.6 Temperature Selection
Whenever a new programme is selected, the recommended temperature for the programme appears on the temperature indicator. It is possible that the recommended

temperature value is not the maximum temperature that can be selected for the current programme. Press the Temperature Adjustment button to change the temperature. Temperature decreases gradually.
No change can be made in programmes where temperature adjustment is not allowed.
You can also change the temperature after the washing starts. This change can be made if the only washing steps allow it.
If you scroll to cold wash option and press Temperature Adjustment button again, the recommended maximum temperature for the selected programme appears on the display. Press the Temperature Adjustment button again to decrease the temperature.
6.7 Spin Speed Selection
Whenever a new programme is selected, the recommended spin speed of the selected programme is displayed on the Spin Speed indicator. It is possible that the recommended spin speed value is not the maximum spin speed that can be selected for the current programme. Press the Spin Speed Adjustment button to change the spin speed. Spin speed decreases gradually. Then, depending on the model of the
product, “Rinse Hold ” and “No Spin ” options appear on the display. If you are not going to unload your laundry immediately after the programme completes, you can use Rinse Hold function in order to prevent them from getting wrinkled when there is no water in the machine.

EN / 25

This function holds the laundry in the final rinsing water. If you want to spin your laundry after the Rinse Hold function:
1. Adjust the Spin Speed.
2. Press Start / Pause. The programme will resume. Machine drains the water and spins the laundry.
If you want to drain the water at the end of the programme without spinning, use No Spin function.
No change can be made in programmes where spin speed adjustment is not allowed.
You can change the spin speed after the washing starts if the washing steps allow it. Changes cannot be made if the steps do not allow it. Rinse Hold
If you are not going to unload your clothes immediately after the programme completes, you can use rinse hold function to keep your laundry in the final rinsing water in order to prevent them from getting wrinkled when there is no water in the machine. Press Start/Pause button after this process if you want to drain the water without spinning your laundry. Programme will resume and complete after draining the water. If you want to spin the laundry held in water, adjust the Spin Speed and press Start/ Pause button. The programme will resume. Water is drained, laundry is spun and the programme is completed.
6.8 Auxiliary Function Selection

Select the desired auxiliary functions before starting the programme. Whenever a programme is selected, icons of the auxiliary function symbol that is selected together with it illuminates.
When an auxiliary function button that cannot be selected with the current programme is pressed, the washing machine will make a warning sound. Some functions cannot be selected together. If a second auxiliary function conflicting with the first one is selected before starting the machine, the function selected first will be cancelled and the second auxiliary function selection will remain active. An auxiliary function that is not compatible with the programme cannot be selected (See “Programme and consumption table”) Some programmes have auxiliary functions that must be operated simultaneously. Those functions cannot be cancelled.
6.8.1 Auxiliary Functions
· Förtvätt
Pre-washing is only necessary for very dirty laundry. You save energy, water, detergent and time if you do not use a Pre-wash. · Tidspar/Intensiv
With this function, you can shorten or increase the program duration. Depending on the program selection, there may be differences in time increases and decreases. In the event that the fast or HEAVY leash does not burn, the appropriate program time for your normal dirty laundry is shown. Depending on the program selection, the Intensive feature may be automatically selected. In this case, it will be burning heavily on the board. When washing very dirty clothes, you can use the intensive choice to get a better washing performance.

EN / 26

You can reduce the time for your low-soiled laundry by pressing the fast/intense button on select programs. Once you press the button, the led will turn off and you will reach the appropriate program time for your normal dirty laundry. When you press the same button a second time, it will burn quickly, reducing the time slightly and showing the minimum program time, suitable for your undersoiled laundry. Selecting this function can shorten the duration of the respective programs by up to 50%. Thanks to optimized wash steps, high mechanical mobility and optimum water consumption, high wash performance is achieved despite the shorter duration. · Ånga
This function helps reduce wrinkles, reduce ironing times and soften and remove dirt from your cotton, synthetic and mixed laundry. *Under conditions where the steam function is applied at the end of the program, your clothes may be warmer at the end of the washing. This is expected within the program operating conditions.
do not use liquid detergents when you activate the steam function unless you have a liquid container or liquid detergent dosing capability. There is a risk of stain on the laundry.
6.8.2 Functions/Programmes Selected by Pressing the Function Keys for 3 Seconds
· Skrynkelfritt
Pressing and holding the corresponding auxiliary function button for 3 seconds will select this function and the program tracking light of the corresponding step will illuminate. When this function is selected, the drum rotates for up to 8 hours to prevent the laundry from wrinkling at the end of the program. During this 8-hour period, you can cancel the program and take off your clothes at any time. Press the function se-

lection key or the machine on/off key to cancel the function. The program tracking light stays on until the function is cancelled or the step is complete. If the function is not cancelled, it remains active during subsequent wash cycles.
· Extra sköljning
This function can be selected by pressing and holding the corresponding auxiliary function button for 3 seconds. This function allows the machine to perform another rinse in addition to the rinsing after the main wash. Thus, sensitive skin (baby skin, allergic skin, etc.) you can reduce the risk of being affected by the very small amount of detergent that can stay in the laundry.
· Barnlås
Using the child Lock feature, you can prevent children from tampering with the machine. This way, you can prevent changes to an ongoing program.
With the child Lock engaged, you can switch the machine on and off with the on/off button. When you start the machine again, the program resumes where it left off. If the buttons are pressed while child Lock is active, the audible warning sounds. If the buttons are pressed five times in a row, the buzzer cancels.
To activate child lock:
Press and hold the corresponding auxiliary function button for 3 seconds. When the “3-2-1” countdown on the display has ended, the child Lock icon appears on the display. When this warning appears, you can release auxiliary function button 3. To deactivate the child lock:
Press and hold the corresponding auxiliary function button for 3 seconds. The child Lock icon disappears when the “3-2-1” countdown on the screen ends.

EN / 27

6.9 End Time
Time display
When the end time function is selected, the remaining time until the programme starts is shown in hours such as 1h, 2h, and the remaining time to complete the programme after your programme starts is shown in hours and minutes as in the 01:30 example.
Programme duration may differ from the values in section “Programme and consumption table” depending on the water pressure, water hardness and temperature, ambient temperature, amount and the type of laundry, auxiliary functions selected and the changes at the mains voltage. After a certain period of time after the end time function is activated, the machine goes into standby mode and some LEDs on the screen turn off. If there is any user input, the LEDs will turn on again.
With the End Time function, the end time of the programme may be set up to 24 hours. After pressing End Time button, the programme’s estimated ending time is displayed. If the End Time is set, End Time indicator is illuminated.

If you want to cancel End Time function, press On/Off button to turn off and on the machine.
When you have activated the End Time function, do not add liquid detergent in the powder detergent compartment no 2. There is the risk of staining of the clothes
1. Open the loading door, place the laundry and put detergent, etc.
2. Select the washing programme, temperature, spin speed and, if required, the auxiliary functions.
3. Set the End Time of your choice by pressing the End Time button. End Time indicator lights.
4. Press Start / Pause. Time countdown starts.
Additional laundry can be added into the machine during the End Time countdown. At the end of the countdown, End Time indicator turns off, washing cycle starts and the time of the selected programme appears on the display.
6.10 Starting the Programme
1. Press Start / Pause button to start the programme.

In order for the End Time function is activated and the programme is completed at the end of the specified time, you must press Start/Pause button after adjusting the time.

2. The Start / Pause button’s light which was off before starts to illuminate steadily now, indicating that the programme has started.
3. Loading door is locked. The door lock symbol appears on the display after the loading door is locked.

EN / 28

4. Programme follow-up indicator lights on the display will show the current programme step.
6.11 Loading Door Lock There is a locking system on the loading door of the machine that prevents opening of the loading door in cases when the water level is unsuitable. “Door Locked” symbol appears on the display when the loading door is locked.
Opening the loading door in case of power failure:
In case of power failure, you can use the loading door emergency handle under the pump filter cap to open the loading door manually.
To avoid any water overflow before opening the loading door, make sure there is no water left inside the machine.
1. Turn off and unplug the appliance. 2. Open the pump filter lid.

6.12 Changing the Selections After Programme has Started
Adding laundry after the programme has started: If the water level in the machine is suitable when you press Start/Pause button, the door lock will be deactivated and the door will open, allowing you to add garments. The door lock icon on the display goes off when the door lock is deactivated. After adding garments, close the door and press Start/Pause button once again to resume the washing cycle.
If the water level in the machine is not suitable when you press Start/Pause button, the door lock cannot be deactivated and the door lock icon on the display remains on.

3. Pull down the loading door emergency handle with a tool and release. Then open the loading door.
4. If the loading door does not open then repeat the previous step.

If the temperature of the water inside the machine is above 50°C, you cannot deactivate the door lock for safety reasons, even if the water level is suitable.
Switching the machine to pause mode:
Press the Start/Pause button to switch the machine to pause mode. Pause symbol will flash on the display.

EN / 29

Changing the programme selection after programme has started: The programme change is allowed when the current programme is running unless the Child Lock is enabled. This action will cancel the current programme.
The selected programme starts anew.
Changing the auxiliary function, speed and temperature: Depending on the step the programme has reached, you can cancel or activate the auxiliary functions. See “Auxiliary function selection” You can also change the speed and temperature settings. See `’Spin speed selection” and “Temperature selection”.
The loading door will not open if the water temperature in the machine is high or the water level is above the loading door baseline.
7 Maintenance and Cleaning

6.13 Cancelling the Programme
The programme is cancelled when programme selection knob is turned to a different programme or machine is turned off and on again using the programme selection knob.
If you turn the programme selection knob when the Child Lock is enabled, the programme will not be cancelled. You should cancel the Child Lock first. If you want to open the loading door after you have cancelled the programme but if it is not possible to open the loading door since the water level in the machine is above the loading door baseline, then turn the Programme Selection knob to Pump+Spin programme and drain the water in the machine.
6.14 End of Programme
End symbol appears on the display when the programme is completed. If you do not press any button for 10 minutes, the machine will switch to OFF mode. Display and all indicators are turned off. Completed programme steps will be displayed if you press On/Off button.

Please read the “Safety Instructions” section first!
Service life of your product extends and frequently experienced problems will be reduced if it is cleaned at regular intervals.
7.1 Cleaning the Detergent Drawer
Clean the detergent drawer at regular intervals (once every 4 to 5 wash) as mentioned below to prevent accumulation of powder detergent.

Clean the syphon if excess amounts of water and fabric softener mixture remains in the softener compartment.

EN / 30

1. Press the marked part of the syphon within the softener compartment and then pull the drawer towards yourself to take it out.
2. Lift and remove the syphon from behind as shown.
3. Rinse drawer and syphon in the sink with plenty of warm water. Use gloves or suitable brush to prevent contact of residues in the drawer with your skin.
4. Firmly fit the syphon and the drawer back after cleaning.
7.2 Cleaning the Loading Door and the Drum
For products with drum cleaning programme, please see the Operating the product section.
Repeat Drum Cleaning process in every 2 months. NOTICE: Use an anti-limescale suitable for the washing machines.

We recommend you to wipe the door gasket with a dry and clean cloth at the end of the programme. This will remove residues on the door gasket in your machine and prevent formation of malodours.
7.3 Cleaning the Body and Control Panel
Wipe the body of the product with soapy water or non-corrosive mild gel detergents as necessary, and dry with a soft cloth. Use only a soft and damp cloth to clean the control panel. Do not use cleaning products that contain bleach
7.4 Cleaning the Water Intake Filters
There is a filter at the end of each water intake valve at the rear of the product and also at the end of each water intake hose where they are connected to the tap. These filters prevent foreign substances and dirt in the water to enter the product. Filters should be cleaned if they are dirty.

After every washing make sure that no foreign substance is left in the product.
If the holes on the door gasket shown in the figure is blocked, open the holes using a toothpick.
Foreign metal substances will cause rust stains in the drum. Clean the stains on the drum surface by using cleaning agents for stainless steel.
Never use steel wool or wire wool. These will damage the painted, chrome coated and plastic surfaces.

1. Close the taps.
2. Remove the nuts of the water intake hoses to access the filters on the water intake valves and clean them with an appropriate brush. If the filters are too dirty, remove them from their places with a pliers and clean in this way.
3. Take out the filters on the flat ends of the water intake hoses together with the gaskets and clean thoroughly under running water.
4. Replace the gaskets and filters carefully and tighten their nuts by hand.

EN / 31

7.5 Draining Remaining Water and Cleaning the Pump Filter
The filter system in your product prevents solid items such as buttons, coins and fabric fibres clogging the pump impeller during draining of washing water. Thus, the water will be drained without any problem and the service life of the pump will extend. If the product fails to drain water inside it, the pump filter is clogged. Filter must be cleaned whenever it is clogged or in every 3 months. Water must be drained off first to clean the pump filter. In addition, prior to transporting the product (e.g., when moving to another house) water should be drained completely.

2. Open the filter cover.
3. Follow the below procedures in order to drain water.
If the product has an emergency water draining hose, in order to drain the water:

NOTICE: Foreign substances left in the pump filter may damage your product or may cause noise problem. In regions where freezing is possible, the tap must be closed, system hose must be removed and the water inside the product must be drained when the product is not in use. After each use, turn off the tap to which the mains hose is connected.
In order to clean the dirty filter and drain the water:
1. Unplug the product to cut off the supply power.
Temperature of the water inside the product may rise up to 90 ºC. To avoid the risk of scalding, clean the filter after the water inside the product is cooled down.
8 Troubleshooting

· Pull the emergency draining hose out of its seat.
· Place the end of the hose in a large container. Drain the water into the container by pulling out the plug at the end of the hose. When the container is filled, close the end of the hose with the plug. Drain all water by repeating the procedure specified above after draining the container.
· When the water drain is finished, close the end with the plug again and fix the hose in its place.
· Unscrew the pump filter.
1. Clean any residues inside the filter as well as fibres, if any, around the pump impeller region.
2. Replace the filter.
3. If the filter cap is composed of two pieces, close the filter cap by pressing on the tab. If it is one piece, seat the tabs in the lower part into their places first, and then press the upper part to close.

Please read the “Safety Instructions” section first!

EN / 32

Programmes do not start after the loading door is closed.
· Start / Pause / Cancel button is not pressed. >>> Press Start / Pause / Cancel button.
· It may be difficult to close the loading door in case of excessive loading.

Reduce the amount of laundry and make sure that the loading door is closed properly.
Programme cannot be started or selected.
· The product has switched to self-protection mode due to a supply problem (line voltage, water pressure, etc.). >>> Depending on the product model, select another program by turning the Program Selection button or pressing and holding the On/Off button for 3 seconds to cancel the program. Previous programme will be cancelled. See Cancelling the Programme [} 30] Water inside the product.
· Some water has remained in the product due to the quality control processes in the production. >>> This is not a failure; water is not harmful to the product.
The product does not take water in.
· Tap is turned off. >>> Turn on the taps. · Water inlet hose is bent. >>> Flatten the
hose. · Water inlet filter is clogged. >>> Clean the
filter. · Loading door is not closed. >>> Close the
door.
The product does not drain water.
· Water drain hose is clogged or twisted. >>> Clean or flatten the hose.
· Pump filter is clogged. >>> Clean the pump filter.
Product vibrates or makes noise.
· Product is standing unbalanced. >>> Adjust the stands to balance the product.
· A hard substance has entered into the pump filter. >>> Clean the pump filter.

· Transportation safety bolts are not removed. >>> Remove the transportation safety bolts.
· Laundry quantity in the product is too little. >>> Add more laundry to the product.
· Excessive laundry is loaded in the product. >>> Take out some of the laundry from the product or distribute the load by hand to balance it homogeneously in the product.
· Product is leaning on a rigid item. >>> Make sure that the product is not leaning on anything.
There is water leaking from the bottom of the product.
· Water drain hose is clogged or twisted. >>> Clean or flatten the hose.
· Pump filter is clogged. >>> Clean the pump filter.
Product stopped shortly after the programme started.
· Machine has stopped temporarily due to low voltage. >>> Product will resume running when the voltage restores to the normal level.
Product directly drains the water it takes in.
· Draining hose is not at adequate height. >>> Connect the water draining hose as described in the user manual.
No water can be seen in the product during washing.
· Water is inside the invisible part of the product. >>> This is not a failure.
Loading door cannot be opened.
· Loading door lock is activated because of the water level in the product.

Drain the water by running the Pump or Spin programme.
· Product is heating up the water or it is at the spinning cycle. >>> Wait until the programme completes.
· Loading door may be stuck because of the pressure it is subjected to. >>> Grab the handle and push and pull the loading door to release and open it.

EN / 33

· If there is no power, loading door of the product will not open. >>> To open the loading door, open the pump filter cap and pull down the emergency handle positioned at the rear side of the said cap. See Loading Door Lock [} 29] Washing takes longer than specified in the user manual. ()
· Water pressure is low. >>> Product waits until taking in adequate amount of water to prevent poor washing quality due to the decreased amount of water. Therefore, the washing time extends.
· Voltage is low. >>> Washing time is prolonged to avoid poor washing results when the supply voltage is low.
· Input temperature of water is low. >>> Required time to heat up the water extends in cold seasons. Also, washing time can be lengthened to avoid poor washing results.
· Number of rinses and/or amount of rinsing water have increased. >>> Product increases the amount of rinsing water when good rinsing is needed and adds an extra rinsing step if necessary.
· Excessive foam has occurred and automatic foam absorption system has been activated due to too much detergent usage. >>> Use recommended amount of detergent.
Programme duration does not countdown. (On models with display) ()
· Timer may stop during water intake. >>> Timer indicator will not countdown until the product takes in adequate amount of water. The product will wait until there is sufficient amount of water to avoid poor washing results due to lack of water. Timer indicator will resume countdown after this.
· Timer may stop during heating step. >>> Timer indicator will not countdown until the product reaches the selected temperature.

· Timer may stop during spinning step. >>> Automatic unbalanced load detection system is activated due to the unbalanced distribution of the laundry in the product.
Programme duration does not countdown. ()
· There is unbalanced load in the product. >>> Automatic unbalanced load detection system is activated due to the unbalanced distribution of the laundry in the product.
Product does not switch to spinning step. ()
· There is unbalanced load in the product. >>> Automatic unbalanced load detection system is activated due to the unbalanced distribution of the laundry in the product.
· The product will not spin if water is not drained completely. >>> Check the filter and the draining hose.
· Excessive foam has occurred and automatic foam absorption system has been activated due to too much detergent usage. >>> Use recommended amount of detergent.
Washing performance is poor: Laundry turns gray. (**)
· Insufficient amount of detergent has been used over a long period of time.

Use the recommended amount of detergent appropriate for water hardness and the laundry.
· Washing has been made at low temperatures for a long time. >>> Select the proper temperature for the laundry to be washed.
· Insufficient amount of detergent is used with hard water. >>> Using insufficient amount of detergent with hard water causes the soil to stick on the cloth and this turns the cloth into gray in time. It is difficult to eliminate graying once it happens. Use the recommended amount of detergent appropriate for water hardness and the laundry.

EN / 34

· Excessive amount of detergent is used. >>> Use the recommended amount of detergent appropriate for water hardness and the laundry.
Washing performance is poor: Stains persist or the laundry is not whitened. ()
· Insufficient amount of detergent is used. >>> Use the recommended amount of detergent appropriate for water hardness and the laundry.
· Excessive laundry is loaded in. >>> Do not load the product in excess. Load with amounts recommended in the “Programme and consumption table”.
· Wrong programme and temperature were selected. >>> Select the proper programme and temperature for the laundry to be washed.
· Wrong type of detergent is used. >>> Use original detergent appropriate for the product.
· Excessive amount of detergent is used. >>> Put the detergent in the correct compartment. Do not mix the bleaching agent and the detergent with each other.
Washing performance is poor: Oily stains appeared on the laundry. ()
· Regular drum cleaning is not applied. >>> Clean the drum regularly. For this procedure, see Cleaning the Loading Door and the Drum [} 31] Washing performance is poor: Clothes smell unpleasantly. ()
· Odours and bacteria layers are formed on the drum as a result of continuous washing at lower temperatures and/or in short programmes. >>> Leave the detergent drawer as well as the loading door of the product ajar after each washing. Thus, a humid environment favourable for bacteria cannot occur in the machine
Colour of the clothes faded. ()
· Excessive laundry was loaded in. >>> Do not load the product in excess.

· Detergent in use is damp. >>> Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures.
· A higher temperature was selected. >>> Select the proper programme and temperature according to the type and soiling degree of the laundry.
Washing machine does not rinse well.
· The amount, brand and storage conditions of the detergent used are inappropriate. >>> Use a detergent appropriate for the washing machine and your laundry. Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures.
· Detergent was put in the wrong compartment. >>> If detergent is put in the prewash compartment although prewash cycle is not selected, the product can take this detergent during rinsing or softener step. Put the detergent in the correct compartment.
· Pump filter is clogged. >>> Check the filter.
· Draining hose is folded. >>> Check the drain hose.
Laundry became stiff after washing. (**)
· Insufficient amount of detergent is used. >>> Using insufficient amount of detergent for the water hardness can cause the laundry to become stiff in time. Use appropriate amount of detergent according to the water hardness.
· Detergent was put in the wrong compartment. >>> If detergent is put in the prewash compartment although prewash cycle is not selected, the product can take this detergent during rinsing or softener step. Put the detergent in the correct compartment.
· Detergent was mixed with the softener. >>> Do not mix the softener with detergent. Wash and clean the drawer with hot water.

EN / 35

Laundry does not smell like the softener. ()
· Detergent was put in the wrong compartment. >>> If detergent is put in the prewash compartment although prewash cycle is not selected product, the can take this detergent during rinsing or softener step. Wash and clean the drawer with hot water. Put the detergent in the correct compartment.
· Detergent was mixed with the softener. >>> Do not mix the softener with detergent. Wash and clean the drawer with hot water.
Detergent residue in the detergent drawer. ()
· Detergent was put in wet drawer. >>> Dry the detergent drawer before putting in detergent.
· Detergent has gotten damp. >>> Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures.
· Water pressure is low. >>> Check the water pressure.
· The detergent in the main wash compartment got wet while taking in the prewash water. Holes of the detergent compartment are blocked. >>> Check the holes and clean if they are clogged.
· There is a problem with the detergent drawer valves. >>> Call the Authorised Service Agent.
· Detergent was mixed with the softener. >>> Do not mix the softener with detergent. Wash and clean the drawer with hot water.
· Regular drum cleaning is not applied. >>> Clean the drum regularly. For this procedure, see Cleaning the Loading Door and the Drum [} 31] Too much foam forms inside the product. (**)
· Improper detergents for the washing machine is used. >>> Use detergents appropriate for the washing machine.

· Excessive amount of detergent is used. >>> Use only sufficient amount of detergent.
· Detergent was stored under improper conditions. >>> Store detergent in a closed and dry location. Do not store in excessively hot places.
· Some meshed laundry such as tulle may foam too much because of their texture. >>> Use smaller amounts of detergent for this type of item.
· Detergent was put in the wrong compartment. >>> Make sure you place the detergent in the appropriate compartment.
· Softener is being taken early by the product. >>> There may be problem in the valves or in the detergent drawer. Call the Authorised Service Agent.
Foam is overflowing from the detergent drawer.
· Too much detergent is used. >>> Mix 1 tablespoonful softener and ½ l water and pour into the main wash compartment of the detergent drawer. >>> Put detergent into the product suitable for the programmes and maximum loads indicated in the “Programme and consumption table”. When you use additional chemicals (stain removers, bleaches and etc.), reduce the amount of detergent.
Laundry remains wet at the end of the programme. ()
· Excessive foam has occurred and automatic foam absorption system has been activated due to too much detergent usage. >>> Use recommended amount of detergent.
() The product does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the product and to its surrounding environment. Laundry should be rearranged and respun.
(**) Regular drum cleaning is not applied. Clean the drum regularly. See Cleaning the Loading Door and the Drum [} 31]

EN / 36

If you cannot eliminate the problem although you follow the instructions in this section, consult your dealer or the Authorised Service Agent. Never try to repair a nonfunctional product yourself.

9 DISCLAIMER / WARNING
Some (simple) failures can be adequately handled by the end-user without any safety issue or unsafe use arising, provided that they are carried out within the limits and in accordance with the following instructions (see the “Self- Repair” section).
Therefore, unless otherwise authorized in the “Self-Repair” section below, repairs shall be addressed to registered professional repairers in order to avoid safety issues. A registered professional repairer is a professional repairer that has been granted access to the instructions and spare parts list of this product by the manufacturer according to the methods described in legislative acts pursuant to Directive 2009/125/ EC. However, only the service agent (i.e. authorized professional repairers) that you can reach through the phone number given in the user manual/warranty card or through your authorized dealer may provide service under the guarantee terms. Therefore, please be advised that repairs by professional repairers (who are not authorized by Cylinda ) shall void the guarantee.
Self-Repair
Self-repair can be done by the end-user with regard to the following spare parts: door, door hinge and seals, other seals, door locking assembly and plastic peripherals such as detergent dispensers (an updated list is also available in www.cylinda.se/support as of 1st of March 2021)
Moreover, to ensure product safety and to prevent risk of serious injury, the mentioned self-repair shall be done following the instructions in the user manual for self-repair

or which are available in www.cylinda.se/ support For your safety, unplug the product before attempting any self-repair.
Repair and repair attempts by end-users for parts not included in such list and/or not following the instructions in the user manuals for self-repair or which are available in www.cylinda.se/support , might give raise to safety issues not attributable to www.cylinda.se/support , and will void the warranty of the product.
Therefore, it is highly recommended that end-users refrain from the attempt to carry out repairs falling outside the mentioned list of spare parts, contacting in such cases authorized professional repairers or registered professional repairers. On the contrary, such attempts by end-users may cause safety issues and damage the product and subsequently cause fire, flood, electrocution and serious personal injury to occur.
By way of example, but not limited to, the following repairs must be addressed to authorized professional repairers or registered professional repairers: motor, pump assembly, main board, motor board, display board, heaters etc.
The manufacturer/seller cannot be held liable in any case where end-users do not comply with the above
The spare part availability of the washing machine or washer-dryer that you purchased is 10 years. During this period, original spare parts will be available to operate the washing machine or washer-dryer properly.

EN / 37

Service
Nationwide service in Sweden Visit www.cylinda.se Call 0771-25 25 00
Declare
Model code Serial number Purchase date Problem description Name and address Phone number
Contact us
www.cylinda.se
2820531294/ EN / 15/07/2023 09:56

Elektroskandia Sverige AB, Cylinda, 191 83 Sollentua

References

• Prisvärda svenska vitvaror- Cylinda - En enklare vardag
• Prisvärda svenska vitvaror- Cylinda - En enklare vardag
• Support och hjälp - bruksanvisningar, service och garantier - Cylinda

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>