SoundCore Icon+ Portable Speaker A3123 User Manual
- June 13, 2024
- Soundcore
Table of Contents
SoundCore Icon + Portable Speaker A3123
USER MANUAL
Safety Precautions
- Avoid dropping.
- Do not disassemble.
- Don’t submerge in water.
- The product shall not be exposed to dripping or splash.
- Avoid extreme temperatures.
- The battery shall not be exposed to excessive heat such as sunshine, fire or the like.
- Do not use the device outdoors during thunderstorms.
- Use original or certified cables.
- Do not use any corrosive cleaner / oil to clean.
- Keep out of reach of children. It contains small parts which may be a choking hazard.
What’s Include
At a Glance
1. 3.5mm Audio Input Port
2. USB Type-C Port
3. Power Button
4. Bass Button
5. Volume – Button
6. Multi-Function
7. Volume + Button
8. Bluetooth Button
9. Bluetooth Indicator
10. Power Indicator
11. Bass Indicator
12. Button Carry Handle
Powering On/Off
Pairing
a. Normal mode
b. TWS Group Mode
With TWS (True Wireless Stereo) technology, you can pair your Soundcore Icon+ with another Soundcore Icon+ to enjoy stereo sound with separate left and right channels.
NOTE:
- When turned on, Soundcore Icon+ will automatically connect to the last connected device if available. If not, press the Bluetooth button to activate pairing mode.
- To pair a different device, press the Bluetooth button to re-enter pairing mode.
- Then repeat the pairing steps.
- To disconnect Soundcore Icon+ from your media device, press the Bluetooth button on the unit or disconnect “Soundcore Icon+” on your device.
- Having connection problems? Remove Soundcore Icon+ from your device’s Bluetooth history and ensure it’s less than 3 feet away. Then try pairing again. To get the best sound quality, make sure there is a clear line of sight between the connected device and your speaker.
Controls
AUX-In
Plugging in an audio cable will automatically switch to AUX mode, and Bluetooth mode will be turned off.
App Control
The Soundcore Icon+ speaker supports App control which allows you to adjust the EQ, view product information, and upgrade the firmware. Download the Soundcore App from the App Store or Google Play.
Charging Your Soundcore Icon+
Soundcore Icon+ does not support PD quick charging and can not charge other media devices.
Updating Soundcore Icon+’s Firmware
There are two methods to upgrade the firmware:
1. OTA online firmware upgrade through the Soundcore App.
2. Manually upgrade the firmware for Soundcore Icon+ through the USB Type-C
cable (go to https://www.soundcore.com/update-firmware to download the
firmware.)
Specifications
Specifications are subject to change without notice.
| Input: | 5 V 2 A |
|---|---|
| Power consumption: | 20W |
| Battery capacity: | Max 5200mAh |
| Charging time: | 4 hours |
| Playtime (varies by volume level and music content): | 12 hours |
| Size: | 229 ×72 × 68 mm / 9.0 × 2.8 ×2.7 inch |
| Weight (without packaging): | 685 g / 24.2 oz |
| Bluetooth version: | V5.0 |
| Bluetooth range: | 20 m / 66 ft |
DOWNLOAD
SoundCore Icon Plus Portable Speaker A3123 User Manual – [Download PDF]
SoundCore Icon Plus Portable Speaker A3123 QSG – [Download PDF]
A3123 Soundcore Icon+ Declaration of Conformity – [Download PDF]
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>