Soundcore Select Portable Speaker A3106 User Manual

: June 13, 2024
: Soundcore

Soundcore Select Portable Speaker A3106

USER MANUAL

Product Number A3106 &,JI r!J
Bluetooth Speaker/ SoundCore Select
57005007709 V02

Safety Instructions

1. Avoid dropping
2. Do not disassemble.
3. Do not submerge in water
4. Avoid extreme temperatures.
5. Use original or certified cables
6. Do not use any corrosive cleaner/oil to clean
7. Do not use the device outdoors during thunderstorms.

What’s In The Box

What's In The Box

At a Glance

Charge Your SoundCore

Charge

Turn on/ off

Bluetooth Pairing

NOTE: When turned on, SoundCore will automatically connect to the last connected device if available. If not, SoundC□re will enter pairing mode.

NFC Pairing

Note: To break connection, tap again the NFC device onto SoundCore’s NFC detection area

Connect via AUX

SoundLine AUX cable sold separately

Note: To return to Bluetooth mode, remove the AUX cable from your SoundCore.

Controls

Specifications

Specifications are subject to change without notice.

Input	5 V == 2 A
Battery capacity	5200 mAh
Audio output power	6 W x 2
Charging time Appr.	4 hours
Playtime (varies by volume level and music content)	Up to 24 hours
Waterproof level	IPX7
Bluetooth version	5
Bluetooth range	20 m / 66 ft
Size	168x 47 x 56 mm/

Notice

This product complies with the radio interference requirements of the European Community.

CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS

This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.

Declaration of Conformity

CE

This product complies with the radio interference requirements of the European Community. Hereby, Anker Technology Declaration of Conformity the EU declaration of conformity is available at the following internet address: anker.com/support

Maximum output power: O.OdBm
Frequency band: 2.4G band (2.4000GHz-2.4835GHz)

IC NOTICE TO CANADIAN USERS

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. This device complies with RSS-247 of Industry Canada, Operation is subject to the condition that this device does not cause harmful interference. This Class B digital apparatus complies with Canadian ICES-003 (Cet appareil numerique de la Classe B conforme a normal NMB-003 du Canada).

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio / TV technician for help.

RF Warning Statement

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Anker Technology Co., Limited
Room 7318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hongkong

Bluetooth

The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Anker Technology Co., Limited is under license.
Other trademarks and trade names are those of their respective owners.