LUXPRO TRICOLOR735 Waterproof LED Headlamp User Manual
- June 4, 2024
- LUXPRO
Table of Contents
USER MANUAL
TRICOLOR735
Waterproof LED Headlamp
Features
Durable ABS and rubberized compact design LPE optics
Dual button intuitive mode selection Non-slip adjustable headband IPX7
waterproof rating Batteries included (3 AAA)
Product Warranty
The LP735 has a Limited 1-Year Warranty Against Manufacturer’s Defects from
time of purchase.
For warranty claims please contact us by calling
801-553-8886 or sending an email to
info@simpleproducts.com
ANSI/PLATO FL1 STANDARD
ANSI/PLATO FL1 STANDARD
MODES|
LUMENS|
RUN TIME|
BEAM DISTANCE
High+| 355 lm| 2h 30m| 199m
High| 300 lm| 6h 30m| 101m
Medium| 165 lm| 15h 30m| 74m
White Flood| 22 lm| 18h| 13m
Operation Instructions
On/Off: Press and release the button on the right side of the headlamp to turn
it on and off.
High+ Mode: From any mode, press and hold the button on the left side of the
headlamp for 3 seconds to turn on High+ Mode. 
Cycle Modes: Press and release the button on the left side of the headlamp
repeatedly to cycle through modes (High+/High/Medium/White/Green). Pushing the
left
button after the headlamp has been turned off will recall the last mode used.
Strobe Mode: From any mode, press and hold the left button for 3 seconds
to switch to Strobe Mode.
Battery Replacement
The LP735 uses 3 AAA batteries.
To replace the batteries, first locate the two plastic tabs on the sides of
the headlamp. Gently push tabs outward using both thumbs to separate the
battery cover from the main headlamp housing. Remove the old batteries and
insert new batteries according to the (+/-) symbols in the battery tubes. For
best results, we recommend using brand new alkaline batteries that are the
same voltage and brand. 
To re-attach the battery cover, line the plastic tabs on the main housing up
to the battery cover taking note to match them in the proper orientation (the
LUX PRO logo on the battery cover should line up with the On/Off button on the
main housing). Gently press the two sides together until they click into
place. Check that the battery cover is secured by gently tugging on the
headlamp straps while holding the main housing firm. When the light is turned
on/off, the blue battery indicator lights
on the side of the headlamp will light up to indicate the battery
percentage.
If you know it will be a while between uses, we suggest removing the batteries from the headlamp and storing it in a dry, protected place.
luxpro.com
14725 S Porter Rockwell Blvd Ste C
Bluffdale, UT 84065
866.553.8886
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>