Soundcore 3 Portable Speaker A3117 User Manual
- June 13, 2024
- Soundcore
Table of Contents
Soundcore 3 Portable Speaker A3117
USER MANUAL
At a Glance
1. Power LED
2. Power button
3. Volume down button
4. Multi-function button
5. Volume up button
6. Bluetooth/PartyCast button
7. Bluetooth/PartyCast LED
8. USB-C charging port
Charging
- Fully dry off the USB port before charging.
- Use the provided USB-C cable to prevent any damage.
- Fully charge this speaker before the first use to prolong the lifespan of the built-in battery.
- Disconnect this speaker from the charger when fully charged. Do not charge for extended periods.
Powering On/Off
This speaker will power off automatically 30 minutes after no audio input or button inactivity.
Using your Soundcore 3
Bluetooth Mode
With this speaker, you can enjoy music through your Bluetooth-enabled devices.
-
Dual Bluetooth Connection: This speaker can pair up to 2 mobile devices via Bluetooth. To pair with another device, press the Bluetooth button to re-enter Bluetooth pairing mode.
-
This speaker can only play music on one mobile device at a time. To play from another connected device, pause the currently active device first.
-
Each time you power on your Soundcore speaker, it will automatically connect to your last connected device if available within the Bluetooth range. f not, press the Bluetooth button to enter Bluetooth pairing mode.
PartyCast Mode
You can wirelessly connect up to 100 identical Soundcore 3 speakers together.
- Press and hold the Bluetooth button for 2 seconds on the Soundcore 3 that’s currently connected to your device as the primary speaker.
- Repeat Step 1 on the other Soundcore 3 you want to connect and then press the Bluetooth button twice to make them secondary speakers in PartyCast pairing.
- The secondary speakers will automatically connect with the primary speaker.
- Soundcore speakers with PartyCast function can be connected with Soundcore 3.
When PartyCast mode is successfully entered:
- Any secondary speaker can be switched to become the primary speaker by pressing the Blutooth button twice and connecting to your smartphone. Any primary speaker can be switched to become the secondary speaker by pressing the Bluetooth button twice and searching for an available primary speaker.
- To exit the PartyCast mode, press and hold the Bluetooth button on any speaker for 2 seconds.
Button Controls
Soundcore App
Download the Soundcore App for enhanced product experience.
- Check product information
- Update firmware
- ndicate battery status
- Remotely control the volume and play/pause
- Customize EO settings
Soundcore App
Specifications are subject to change without notice
| DC power input | 5 V 2 A |
|---|---|
| Battery capacity | 6700 mAh |
| Audio output power | 8 W x 2 |
| Playtime (varies by volume level and music content) | Up to 24 hours |
| Charging time Appr. | 4 hours |
| Waterproof level | IPX7 |
| Bluetooth version | 5 |
| Bluetooth range | 20 m / 66 ft |
| Press and hold for | 2 seconds |
Support Videos
How to pair Soundcore 3, Mini 3, and Flare 2 Speakers via PartyCast
How to pair Motion Boom Plus with Soundcore 3
DOWNLOAD
Soundcore 3 Portable Speaker A3117 User Manual – [Download PDF]
Soundcore 3 Portable Speaker A3117 QSG – [Download PDF]
A3117 Soundcore 3 Declaration of Conformity – [Download PDF]