LUXPRO LP1201 High-Output LED Flashlight User Manual

June 4, 2024
LUXPRO

LUXPRO LOGO USER MANUAL
LP1201
High-Output LED Flashlight

LUXPRO LP1201 High-Output LED Flashlight -

Features

Constructed with aircraft-grade aluminum
Long range LPE optics
Patented TackGrip rubber grip
Ergonomic side button
IPX4 waterproof rating
Uses 6 AA or 3 AA batteries (6 AA included)

ANSI/PLATO FL1 STANDARD

| | |
---|---|---|---
MODES| LUMENS| RUN TIME| BEAM DISTANCE
High| 1000 lm| 6h|  400m
Medium| 380 lm| 18h| 220m
Low| 80 lm| 67h| 100m
Strobe| 1000 lm| —| —

Operation Instructions

On/Off: Press and release the button on the side of the light to turn on and off.

Cycle Modes: Press the button on the side of the light quickly to cycle through modes (High/Medium/Low). If light remains in a single mode for longer to 3-5 seconds, the next press of the button will turn the light off.
Light automatically resets to High mode when turned off.
Hidden Strobe On/Off: Press and hold button for 3 seconds to activate hidden strobe. Flashlight will remain in hidden strobe mode until it is deactivated by pushing and holding the button for 3 seconds again.

Battery Replacement

The LP1201 can use 6 or 3 AA batteries.
To replace the batteries, turn the tail cap counterclockwise to remove it. Tip the light downward to slide the batteries out of the tubes.

LUXPRO LP1201 High-Output LED Flashlight - slide the
batteries

To use the light with 6 batteries, insert 3 batteries into each tube (+) side first (batteries will stick out of the opening slightly).
To use the light with 3 batteries, insert 3 batteries into just one of the tubes (+) side first.
For best results, we recommend using brand new alkaline batteries that are the same voltage and brand. Re-attach the tail cap by pressing down and turning it clockwise until tight.
If you know it will be a while between uses, we suggest removing the batteries from the flashlight and storing it in a dry, protected place.

Product Warranty

The LP1201 has a Limited Lifetime Warranty Against Manufacturer’s Defects from time of purchase.
For warranty claims please contact us by calling 801-553-8886 or sending an email to info@simpleproducts.com

l uxpro.com
866.553.8886
14725 S Porter Rockwell Blvd Ste C
Bluffdale, UT 84065

Documents / Resources

| LUXPRO LP1201 High-Output LED Flashlight [pdf] User Manual
LP1201, High-Output LED Flashlight, LED Flashlight, Flashlight, LP1201 High- Output LED Flashlight
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals