Kuzco Lighting CH332830 Cairo Chandelier Instruction Manual
- June 13, 2024
- Kuzco Lighting
Table of Contents
Kuzco Lighting CH332830 Cairo Chandelier
Product Information
- Product Name: CH332830 Chandelier
- Manufacturer: Alora Lighting
Contact Information: P: 1.855.855.8926 | Canada: 19054 28th
Avenue Surrey – BC V3Z 6M3 | USA: 3035 E. Lone Mountain Rd – Las
Vegas, NV, 89081 | Website:
www.aloralighting.com
ASSEMBLY INSTRUCTIONS
- Step 1: Remove the chandelier from its original package.
- Step 2: Separate the mounting plate (1c) from the canopy (2a) by removing the canopy screws (2b).
- Step 3: Attach the mounting plate (1c) to the electrical junction box (1a) using the junction box screws provided (1e) in the hardware package.
- Step 4: Determine the hanging height of the chandelier by securing the rods (2d) to the fixture (3a) and hooking them onto the canopy (2a), after feeding the fixture’s wires through the rods.
- Step 5: Make proper electrical connections by using wire nuts (1b) provided in the hardware package. Connect the black wire to hot L, the white wire to neutral N, and the ground wire to GND.
- Step 6: Install the recommended lamp (4a) to the fixture socket. Refer to the socket label for the maximum wattage and type of lamp required. Please note that the lamp is not provided.
- Step 7: Attach the canopy (2a) to the mounting plate (1c) using the canopy screws (2b).
You are now ready to enjoy your chandelier.
Technical Support
Contact Alora Lighting’s technical support for any further assistance:
Phone: 1.855.855.8926
Email:
technicalsupport@aloralighting.com
WARNINGS AND CAUTIONS
- Make sure POWER is COMPLETELY OFF at the fuse box
- Have your fixture installed by a qualified licensed electrician
- Prepare everything in a clear area
- Wear gloves at all times during this installation
- Read instructions carefully before you start assembly
- Keep this installation sheet for future reference
Please Note
- 120V input
NOTICE
- The important safeguards and instructions outlined in this sheet cannot cover all possible conditions and situations that may occur. It must be understood that caution and certain care factors must be followed. These instructions are provided for your safety and we highly recommend that a licensed, trained electrician install this unit.
- This fixture is designed to be mounted on a correctly installed standard round or octagon box OR through a wiring box with a plaster frame. The box must be securely mounted to the structure of the building. The crossbar and hardware supplied should be used, directly mounting the fixture to the outlet box may make it impossible to correctly align the fixture.
P: 1.855.855.8926
CANADA
USA: 3035 E. Lone Mountain Rd – Las Vegas, NV, 89081
www.aloralighting.com
19054 28th Avenue Surrey – BC V3Z 6M3
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>