Kuzco Lighting PD344020 Palmetto 1 Light Pendant Instruction Manual
- June 13, 2024
- Kuzco Lighting
Table of Contents
Kuzco Lighting PD344020 Palmetto 1 Light Pendant
Product Information
Product Name: PD344020 Pendant
Warnings and Cautions: Before proceeding with the installation, please
read and follow the warnings and cautions provided in the user manual.
Assembly Instructions:
- Remove the fixture from its original package.
- Separate the mounting plate (1c) from the canopy (2a) by removing the canopy screws (2b).
- Attach the mounting plate (1c) to the electrical junction box (1a) using the junction box screws provided (1e) in the hardware package.
- Determine the hanging height of the fixture by securing rods (2d) to the canopy (2a) and the fixture hub (3a) after feeding the fixture wires through the rods.
- Make proper electrical connections by using wire nuts (1b) provided in the hardware package. Connect black wire to hot L, white wire to neutral N, and ground wire to GND.
- Secure the shade (3c) to the fixture hub (3a) with screws (3b).
- Install the recommended lamp (4a) (lamp not provided) according to the maximum wattage and type mentioned on the socket label.
- Secure the glass (3d) to the fixture hub (3a) by threading it clockwise.
- Attach the canopy (2a) to the mounting plate (1c) using canopy screws (2b).
You are now ready to enjoy your pendant fixture.
Technical Support:
Contact our technical support team for any assistance:
- Phone : 1.855.855.8926
- Email : technicalsupport@aloralighting.com
Contact Information:
Alora Lighting Canada Address: 19054 28th Avenue Surrey – BC V3Z 6M3 USA
Address: 3035 E. Lone Mountain Rd – Las Vegas, NV, 89081
- Website : www.aloralighting.com
- Date : 20230619
WARNINGS AND CAUTIONS
- Make sure POWER is COMPLETELY OFF at the fuse box
- Have your fixture installed by a qualified licensed electrician
- Prepare everything in a clear area
- Wear gloves at all times during this installation
- Read instructions carefully before you start assembly
- Keep this installation sheet for future reference
Please Note:
- 120V input
NOTICE
- The important safeguards and instructions outlined in this sheet cannot cover all possible conditions and situations that may occur. It must be understood that caution and certain care factors must be followed. These instructions are provided for your safety and we highly recommend that a licensed, trained electrician install this unit.
- This fixture is designed to be mounted on a correctly installed standard round or octagon box OR through a wiring box with a plaster frame. The box must be securely mounted to the structure of the building. The crossbar and hardware supplied should be used, directly mounting the fixture to the outlet box may make it impossible to correctly align the fixture.
ASSEMBLY INSTRUCTIONS
-
Step 1
Remove fixture from its original package. -
Step 2
Separate mounting plate (1c) from canopy (2a) by removing canopy screws (2b). -
Step 3
Attach mounting plate (1c) to electrical junction box (1a) using junction box screws provided (1e) in hardware package. -
Step 4
Determine hanging height of fixture by securing rods (2d) to canopy (2a) and fixture hub (3a) after feeding fixture wires through rods. -
Step 5
Make proper electrical connections (black to hot “L”, white to neutral “N”, ground to “GND”) with wire nuts (1b) provided in hardware package. -
Step 6
Secure shade (3c) to fixture hub (3a) with screws (3b). -
Step 7
Install the recommended lamp (4a) (not provided) (referred on the socket label for maximum wattage and type) to fixture socket. -
Step 8
Secure glass (3d) to fixture hub (3a) by threading clockwise. -
Step 9
Attach canopy (2a) to mounting plate (1c) with canopy screws (2b). You are now ready to enjoy your fixture.
TECHNICAL SUPPORT
1.855.855.8926
technicalsupport@aloralighting.com
P : 1.855.855.8926
CANADA : 19054 28th Avenue Surrey – BC V3Z 6M3
USA : 3035 E. Lone Mountain Rd – Las Vegas, NV, 89081
www.aloralighting.com
20230619