Enapter ENP-RS485 Module User Guide
- June 13, 2024
- Enapter
Table of Contents
ENP-RS485
Module
Quick Start Guide
ENP-RS485 Module
| For indoor use only
---|---
| For humid environments, additional IP68 protection is needed
| Regularly check all parts for damage
-
Connect the Module to the Endpoint Device and External Power Supply
All information about Enapter devices can be found at handbook.enapter.com.
Contact support at support@enapter.com.
The power supply assembly, connection,operation, transportation, storageand disposal guide must be followed at every step.
Endpoint device:
• invertersj
• ventilation systemsj
• valvesj
• irradiance sensorsj
• power meters and others. -
Screw Wi-Fi Antenna into the Port
Module sends the collected data to the Enapter Gateway and Cloud via secure wireless connection:
• Wi-Fi 2.4 GHe
• Bluetooth 4.0 LE
Make sure the antenna is connected to the port. Alternating current voltage of 110-220 V is potentially lethal!
All assembly and installation works should be only performed with a disconnected power supply! -
Follow the Enapter App Instructions to Connect the Device to Enapter Cloud
https://play.google.com/store/apps/details?id=com.enapter&hl=ru
To download the app, scan the QR-code with your
Android or Apple mobile phone or visit app.enapter.com
• Open the Enapter app and create an account.
• Follow the steps to create a site.
• Press the Add device button.”
-
Scan QR-code on the Side of Module With Enapter App
If you can’t scan, enter Device ID and PIN manually.
Find them on the side of the module. -
Monitor Device Activity
During normal operation, the LEDs indicate the status of the module. Monitor device activity in Enapter App or Enapter Cloud.
Guide version 2.1
Documents / Resources
|
Enapter ENP-RS485
Module
[pdf] User Guide
ENP-RS485 Module, ENP-RS485, Module
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>