Enapter ENP-CAN Module User Guide
- June 13, 2024
- Enapter
Table of Contents
ENP-CAN
Module
Quick Start Guide
Connect the Module to the Endpoint Device and External Power Supply
All information about Enapter devices can be found at
handbook.enapter.com.
Contact support at support@enapter.com.
The power supply assembly, connection, operation, transportation, storage and disposal guide must be followed at every step.
Endpoint device:
- vehiclesq
- invertersq
- ventilation systemsq
- valvesq
- irradiance sensorsq
- power meters and others.
Screw Wi-Fi Antenna into the Port
Module sends the collected data to the Enapter Gateway and Cloud via secure wireless connection:
- Wi-Fi 2.4 GH
- Bluetooth 4.0 LE
Make sure the antenna is connected to the port.
Alternating current voltage of 110-220 V is potentially lethal!
All assembly and installation works should be only performed with a
disconnected power supply!
Follow the Enapter App Instructions to Connect the Device to Enapter
Cloud
To download the app, scan the QR-code with your Android or Apple mobile phone or visit app.enapter.com
https://play.google.com/store/apps/details?id=com.enapter&hl=ru
- Open the Enapter app and create an account.
- Follow the steps to create a site.
- Press the Add device button.
Scan QR-code on the Side of Module With Enapter App
If you can’t scan, enter Device ID and PIN manually. Find them on the side of the module.
Monitor Device Activity
During normal operation, the LEDs indicate the status of the module. Monitor device activity in Enapter App or Enapter Cloud.
Guide version 2.1
Documents / Resources
|
Enapter ENP-CAN
Module
[pdf] User Guide
ENP-CAN Module, ENP-CAN, Module
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>