SoundCore Select Pro Portable Speaker A3126 User Manual
- June 13, 2024
- Soundcore
Table of Contents
SoundCore Select Pro Portable Speaker A3126
USER MANUAL
At a Glance
1. BassUp button
2. Bluetooth button
3. Volume down button
4. Multi-function button
5. Volume up button
6. Power button
7. Light effect button
8. USB-A port for charging out
9. USB-C port for charging in
Charging
Charge Your Speaker
- Use a certified USB-C cable and charger to prevent any damage.
- Fully dry off the USB port before charging.
- Fully charge this speaker before the first use to prolong the lifespan of the built-in battery.
- Disconnect this speaker from the charger when fully charged. Do not charge for extended periods.
Charge Your USB Devices
Charge your USB devices through the USB-A charging port
Powering On/Off
This speaker will power off automatically after 30 minutes if no device is connected.
Using Your Speaker
Bluetooth Mode
With this speaker, you can enjoy music through your Bluetooth-enabled devices.
- This speaker can pair with 2 mobile devices via Bluetooth. To pair with another Bluetooth device, press the Bluetooth button to re-enter Bluetooth pairing mode.
- This speaker can only play music on one mobile device at a time. To play from another connected device, pause the device that’s currently active first.
- Each time you power on your Soundcore speaker, it will automatically connect to your last connected device if available within the Bluetooth range. f not, press the Bluetooth button to enter Bluetooth pairing mode.
PartyCast Mode
You can wirelessly connect up to 100 identical Soundcore Select Pro speakers together. n PartyCast mode, connect one of the speakers with your mobile device so that all connected speakers play the same audio.
- Soundcore speakers with PartyCast function can also be connected with this speaker.
1. Press and hold the Bluetooth button for 2 seconds on the Soundcore Select Pro that’s currently connected to your device as the primary speaker.
2. Repeat Step 1 on the other Soundcore Select Pro you want to connect and then press the Bluetooth button twice to make them secondary speakers in PartyCast pairing.
- The secondary speakers will automatically connect with the primary speaker.
When PartyCast mode is successfully entered:
PartyCast connected
Any secondary speaker can be switched to become the primary speaker by pressing the Bluetooth button twice and connecting to your smartphone. Any primary speaker can be switched to become the secondary speaker by pressing the Bluetooth button twice and searching for an available primary speaker.
To exit the PartyCast mode, press and hold the Bluetooth button on any speaker for 2 seconds.
Button Controls
Soundcore App
Download the Soundcore app to enhance your experience.
Product information: Check the product name and software version, or read the user manual.
Firmware update: You will be informed once a new version of firmware is detected when you connect the speaker with the app.
Battery status: **** ndicates the remaining battery level of your speaker.
Volume control: Adjust the volume level via the app without pressing the buttons on the speaker.
EQ settings: There are 4 EO settings you can choose from in the app to optimize your experience while enjoying different music genres.
- Soundcore Signature: Normal EO mode with well-balanced sound.
- Voice: Voices stand out more clearly from other ambient sounds.
- Treble Boost: High frequencies are enhanced.
- Balance: No enhancement for high-frequency and low-frequency sounds.
Set Auto-power off time: Set an auto-power off time (5/10/30/60 minutes, 30 minutes by default), the speaker will automatically power off when time is up.
Light effects: Besides the music-sync light effects, you can also choose your favorite light effects (Beach Party, Camping Trip, Evening Breeze, Midnight Groove) from in the app.
Voice prompt: Mute or restore the voice prompt while powering on/off
Light Effects
- This speaker is equipped with light effects for a party mood.
- Press the light effect button to turn on or switch among multiple music-sync light effects.
- To turn the light effects off, press and hold the light effect button for 2 seconds.
- You can also check all available light effects in the Soundcore app.
Specifications
Specifications are subject to change without notice.
DC power input | 5 V == 2.1 A |
---|---|
USB output | 5 V == 1 A |
Battery capacity | 3350 mAh / 7.2 V |
Audio output power | 30 W |
Charging time | 4-6 hours |
Playtime (varies by volume level and music content) | Up to 16 hours |
Waterproof level | IPX7 |
Bluetooth version | 5 |
Bluetooth range | 20 m / 66 ft |
Support Videos
How to pair Motion Boom Plus with Select Pro
DOWNLOAD
SoundCore Select Pro Portable Speaker A3126 User Manual – [Download PDF]
SoundCore Select Pro Portable Speaker A3126 QSG – [Download PDF]
A3126 Soundcore Select Pro Declaration of Conformity – [Download PDF]
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>