SoundCore Motion Boom Portable Speaker A3118 User Manual

June 13, 2024
Soundcore

SoundCore Motion Boom Portable Speaker A3118

SoundCore Motion Boom

USER MANUAL

At a Glance

At a Glance

1. Bass button
2. Bluetooth button
3. Volume down button
4. Multi-function button
5. Volume up button
6. Power button
7. TWS button
8. USB-A port for charging out
9. USB-C port for charging in

Charging

Charge your Speaker

  • Use a certified USB-C cable and charger to prevent any damage.
  • Fully charge this speaker before the first use to prolong the lifespan of the built-in battery.
  • Disconnect this speaker from the charger when fully charged. Do not charge for extended periods.

Charging

Charge your USB Devices

Charge your USB devices through the USB-A charging port.

Powering On/Off

This speaker will power off automatically after 30 minutes if no device is connected.

Using Your Speaker

Bluetooth Mode

With this speaker, you can enjoy music through your Bluetooth-enabled devices.

  • Each time you power on your Soundcore speaker, it will automatically connect to your last connected device if available within the Bluetooth range. f not, press the Bluetooth button to enter Bluetooth pairing mode.
TWS (True Wireless Stereo) Mode

Two identical Soundcore speakers can pair up with each other for true wireless stereo sound. n TWS mode, connect either one of the two speakers with your mobile device so that both speakers play the same audio (one as L channel and the other as R channel).

On both Soundcore speakers, press the TWS button to enter TWS pairing mode.

  • The speakers start searching for each other to establish the TWS connection. The TWS LED indicator on both speakers will flash white.
  • Once successfully connected, the TWS LED indicator on both speakers will become steady white.

To exit the TWS mode, press and hold the TWS button for 2 seconds.

Button Controls

Soundcore App

Download the Soundcore app to enhance your experience.

Product information:  Check the product name and software version, or read the user manual.

Firmware update:  You will be informed once a new version of firmware is detected when you connect the speaker with the app.

Battery status: **** ndicates the remaining battery level of your speaker.

Volume control:  Adjust the volume level via the app without pressing the buttons on the speaker.

EQ settings: There are 4 EO settings you can choose from in the app to optimize your experience while enjoying different music genres.

  • Soundcore Signature: Normal EO mode with well-balanced sound.

  • Voice:  Voices stand out more clearly from other ambient sounds.

  • Treble Boost: High frequencies are enhanced.

  • Balance: No enhancement for high-frequency and low-frequency sounds.

Set Auto-power off time: Set an auto-power off time (5/10/30/60 minutes, 30 minutes by default), the speaker will automatically power off when time is up.

Voice prompt:  Mute or restore the voice prompt while powering on/off.

Specifications

Specifications are subject to change without notice.

DC power input 5 V   2.1 A
Battery capacity 10000 mAh
USB output 5 V   1 A
Audio output power 30 W
Charging time 4 hours
Playtime Up to 24 hours

(varies by volume level and music content)
Waterproof level| IPX7
Bluetooth version| 5
Bluetooth range| 20 m / 66 ft


DOWNLOAD

SoundCore Motion Boom Portable Speaker A3118 User Manual – [Download PDF]

SoundCore Motion Boom Portable Speaker A3118 QSG – [Download PDF]

A3118 Soundcore Motion Boom Declaration of Conformity – [Download PDF]


Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals