SoundCore Trance Party Speakers A3393 User Manual
- June 13, 2024
- Soundcore
Table of Contents
SoundCore Trance Party Speakers A3393
USER MANUAL
What’s Included
At a Glance
Top Panel
1.
- Press and hold for 2 seconds to power on.
- Press to power off.
2.
- Press to enter Bluetooth pairing mode.
- Press and hold to enter True Wireless Stereo (TWS) mode while pairing.
3. (Source input button)
- Press repeatedly to select source input.
4.
- Press to skip to previous/next track.
5.
- Press to adjust volume.
- Press and hold to continuously adjust volume.
6. (Multi-function button)
- Press to play/pause music.
- Press to answer or end a call.
- Press and hold to reject an incoming call.
- Press to put the current call on hold and answer an incoming call.
- Press to transfer a call between speaker and mobile phone.
- Press and hold to switch between held call and active call.
7. (Light effect button)
- Press to turn on/off the light mode and switch the light modes.
8.
- Press to turn on/off BassUP mode.
- Press and hold for 2 seconds to switch between indoor/outdoor sound mode.
Connectors
1. DC IN
- Connect to the provided power adaptor.
2. USB
- Connect to a USB storage device.
- Charge a USB device.
3. AUX
- Connect to an external audio device through a 3.5mm aux cable (not provided).
Charging
Charging your Speaker
- Fully charge this speaker before the first use to prolong the lifespan of the built-in battery.
Checking Battery Level
Press any button to check the remaining battery level when it is powered on.
Charging your USB Devices
Use this speaker as an external battery to charge your USB devices.
Connect your USB device to the USB port on the back of this speaker.
Powering On/Off
Connect the provided power adaptor to the DC IN power jack of this speaker, and then to an AC mains outlet. The built-in battery can be used as power supply of this speaker.
Press and hold for 2 seconds to power on. Press to power off.
- Unplug the power adaptor from the AC mains outlet when not in use for an extended period of time.
- If this speaker is powered by built-in battery, it will power off automatically after 30 minutes of button inactivity or no audio playback.
- If this speaker is connected to AC power and the built-in battery is fully charged, it will power off automatically after 30 minutes of button inactivity or no audio playback.
Using your Soundcore Trance
Bluetooth Mode
With this speaker, you can enjoy music through your Bluetooth-enabled devices.
- Dual Bluetooth Connection: This speaker can pair up to two mobile devices via Bluetooth and play music on one mobile device at a time. To play from another connected device, pause the currently active device first.
- To pair with another Bluetooth device, press to re-enter Bluetooth pairing mode.
- Each time you power on your Soundcore speaker, it will automatically connect to your last connected device if available within the Bluetooth range. If not, press to enter Bluetooth pairing mode.
- You may also control music in the Soundcore App.
True Wireless Stereo (TWS) Mode
Two identical Soundcore speakers (Soundcore Trance) can pair with each other for stereo sound. The two speakers can music as the left channel and right channel.
Press and hold on both Soundcore Trance speakers simultaneously to enter TWS mode.
- With TWS connected, volume can be controlled at the same time for the two speakers.
- With TWS connected, both speakers can be paired with different smartphones.
USB/AUX Mode
Plug in a 3.5mm audio cable or insert a USB storage drive, then press to switch between AUX and USB mode.
- When using AUX mode, control audio playback via the connected device.
Button controls
Beat-Driven Light Show
Press to turn on/off or switch the light modes.
Check all available light modes in the Soundcore App.
Soundcore App
Download the Soundcore App for enhanced product experience.
- Set up Bluetooth connection
- Update firmware
- Indicate battery status
- Switch among multiple light modes ( Default light mode is “Party”)
- Switch between indoor and outdoor sound modes
- Light DJ mode to support light and sound variation
- Enjoy party games
- Switch BassUP mode
- Remotely control the volume and play/pause
Specifications
Specifications are subject to change without notice
| AC power input | 100 ~ 240 V, 50/60Hz |
|---|---|
| DC power inDC power inputput | 15 V 3 A |
| Battery capacity | 4900 mAh / 7.4 V |
| USB output | 5 V 2.4 A (Max) |
| Output power | 80 W (PEAK) |
| Charging time | 4.5 hours |
| Playtime (varies by volume level and music content) | 18 hours |
| Waterproof level | IPX7 |
| Bluetooth version | V5.0 |
| Bluetooth range | 20 m / 66 ft |
DOWNLOAD
SoundCore Trance Party Speakers A3393 User Manual – [Download PDF]
SoundCore Trance Party Speakers A3393 QSG – [Download PDF]
A3393 Soundcore Trance Declaration of Conformity – [Download PDF]