SoundCore Motion Boom Plus Portable Speaker A3129 User Manual

SoundCore Motion Boom Plus Portable Speaker A3129

USER MANUAL

At a Glance

1. Bass up button
2. Bluetooth button
3. Volume down button
4. Multi-function button
5. Volume up button
6. Power button
7. PartyCast button
8. USB-C port for charging in
9. USB-A port for charging out
10. Audio port

Charging

Charge your Speaker

• Use a certified USB-C cable and charger to prevent any damage.
• Fully charge this speaker before the first use to prolong the lifespan of the builtin battery.
• Disconnect this speaker from a charger when fully charged. Do not charge for extended periods.

Charge your USB Devices

Charge your USB devices through the USB-A charging port.

Powering On/Off

This speaker will power off automatically after 20 minutes if no device is connected.

Using Your Speaker

Bluetooth Mode

With this speaker, you can enjoy music through your Bluetooth-enabled devices.

• This speaker can pair with 2 mobile devices via Bluetooth. To pair with another Bluetooth device, press the Bluetooth button once to re-enter Bluetooth pairing mode.
• This speaker can only play music on one mobile device at a time. To play from another connected device, pause the device that’s currently active first.
• Each time you power on your Soundcore speaker, it will automatically connect to your last connected device if available within the Bluetooth range. If not, press the Bluetooth button once to enter Bluetooth pairing mode.

TWS (True Wireless Stereo) Mode

Two identical Motion Boom Plus speakers can pair up with each other for true wireless stereo sound. In TWS mode, connect either one of the two speakers with your mobile device so that both speakers play the same audio (one as L channel and the other as R channel).

On both Soundcore speakers, press and hold the Bluetooth button for 2 seconds to enter TWS pairing mode.

• The speakers start searching for each other to establish the TWS connection.
  The TWS LED indicator on both speakers will flash white.

• Once successfully connected, the TWS LED indicator on primary speaker will be steady blue while on secondary speaker will be steady white.

To exit the TWS mode, press and hold the Bluetooth button for 2 seconds.

PartyCast Mode

You can wirelessly connect up to 100 identical Motion Boom Plus speakers together.

1. Connect a Motion Boom Plus speaker with your smartphone or tablet as the primary speaker.
2. Press the PartyCast button once on the primary speaker and all the additional speakers to enter the pairing mode.

When successfully connected, you will hear a prompt sound.

When PartyCast mode is successfully entered:

• Any Motion Boom Plus speaker can connect with a speaker supporting PartyCast 1.0 by pressing the PartyCast button twice.
• To exit PartyCast mode, press the PartyCast button once on any speaker.

Button Controls

Soundcore App

Download the Soundcore app to enhance your experience.

Product information: Check the product name and software version, or read the user manual.

Firmware update: You will be informed once a new version of firmware is detected when you connect the speaker with the app.

Battery status: Indicates the remaining battery level of your speaker.

Volume control: Adjust the volume level via the app without pressing the buttons on the speaker.

EQ settings: There are 6 EQ settings you can choose from in the app to optimize your experience while enjoying different music genres.

• Soundcore Signature: Normal EQ mode with well-balanced sound.
• Voice: Voices stand out more clearly from other ambient sounds.
• Treble Boost: High frequencies are enhanced.
• Balance: No enhancement for high-frequency and low-frequency sounds.
• Custom: Customize the EQ setting to suit you in the app.
• BassUp: Turn on BassUp to enhance the low-frequency sound.

Set Auto-power off time: Set an auto-power off time (5/10/30/60 minutes, 30 minutes by default), the speaker will automatically power off when the time is up.

Voice prompt: Mute or restore the voice prompt while powering on/off.

Specifications

Specifications are subject to change without notice.

Support Videos

How to pair Motion Boom Plus with Rave PartyCast

Unboxing and charging the Motion Boom Plus Speaker

How to pair Motion Boom Plus with Flare 2

How to pair Motion Boom Plus with Soundcore 3

How to enable PartyCast

How to pair Motion Boom Plus with Rave Neo

How to pair Motion Boom Plus with Select Pro

How to use the soundcore app for Motion Boom Plus

How to reset Motion Boom Plus

How to pair two Motion Boom Plus speakers via True Wireless Stereo

How to pair your phone and soundcore app with Motion Boom Plus Speaker

Soundcore Motion Boom Plus A3129 FAQ

How do I turn off Motion Boom Plus’s voice prompts?

1. Connect your device to Motion Boom Plus.

2. Open the Soundcore app.

3. Press the settings button in the top right corner to access more options.

4) Turn off voice prompts.

How do I reset Motion Boom Plus?

Turn on the speaker, then hold the Bluetooth and Volume + buttons for 5-8s.

I haven’t used Motion Boom Plus for a while, why won’t it turn on?

If you haven’t charged or used Motion Boom Plus in a long time, the battery may be over-discharged. Charge for at least one hour before turning it on.

What do the indicator lights mean during charging?

– Solid red light while charging.

– Solid white light when fully charged.

Will Motion Boom Plus sink if it is dropped in water?

1. Turn on 2 Motion Boom Plus speakers and connect either one to your device via Bluetooth.

2. Hold the Bluetooth button for 2-3s on both speakers until they flash white.

3. Wait for 3-5s until you hear the ‘ding’ sound. This means they are successfully paired.

4. Once paired, the primary speaker will show a solid blue light, while the secondary speaker will show white light.

Can I use Motion Boom Plus as a battery to charge other devices?

Yes. There is a USB-A port for charging other devices.

Does Motion Boom Plus have a built-in microphone?

Yes.

How do I upgrade Motion Boom Plus’s firmware via the Soundcore app?

1. Open the Soundcore app and press ‘Update Firmware’.

2. Do not use your phone while the firmware is updating, except if you’ve set the Soundcore app to run in the background.

3. Motion Boom Plus will restart automatically after upgrading.

How do I pair 2 Motion Boom Plus speakers together wirelessly via

PartyCast?

1. Turn on 2 Motion Boom Plus speakers and connect one to your device via Bluetooth.

2. Press the PartyCast button on both speakers and you will see a solid white light.

3. Wait for 3-5s until you hear a ‘ding’ sound. This means they are successfully paired.

4. Once paired, the primary speaker will show solid white light, while the secondary speaker will show white light.

How to recharge the speaker?

You can use a USB-C wall charger with 5V/3A output to recharge.

How long does it take to fully recharge Motion Boom Plus?

By using a 5V/3A USB-C wall charger, you can recharge to 100% in 5.5 hours.

How long does it take to fully recharge Motion Boom Plus?

By using a 5V/3A USB-C wall charger, you can recharge to 100% in 5.5 hours.

What should I do if I fail to pair the speaker with my phone?

1. Confirm that the speaker is fully charged and not paired with other devices.

2. Forget all Bluetooth pairing records on your device.

3. Reboot your speaker and your device.

4. Disable and enable Bluetooth on your device.

5. Reset the speaker.

6. Try to connect the speaker to another device.

Is a PIN or Password needed when pairing Soundcore Motion Boom Plus with

a device?

A PIN or password is not needed when pairing a Soundcore speaker with a device. Hence, if you encounter an issue during the pairing process, please try these steps:

1. Confirm that Soundcore Motion Boom Plus is fully charged and not connected to other devices.

2. Forget all Bluetooth pairing records on your device.

3. Reboot your Soundcore Motion Boom Plus and your device.

4. Disable and then enable Bluetooth on your device.

5. Reset Soundcore Motion Boom Plus by holding the Bluetooth and Volume+ buttons at the same time for 5-10s until Motion Boom Plus restarts.

6. Connect Soundcore Motion Boom Plus to a different device.

How do I fix Soundcore Motion Boom Plus’s noise issues？

1. Confirm that the speaker is fully charged.

2. Reset the speaker.

3. Reboot your speaker and your device.

4. Try connecting the speaker to another device. If possible, try using another app or audio source.

5. Ensure there are no physical objects interfering with the Bluetooth connection from the speaker to the device, such as a doorway or wall.

What should I do if Soundcore Motion Boom Plus doesn’t make any sound?

1. Confirm that the speaker is fully charged.

2. Reset the speaker.

3. Restart your speaker and the device it is paired with to test again.

4. Try connecting the speaker to a different device. If possible, try another app or audio source.

5. Make sure the volume on both the speaker and the paired device are turned up.

What should I do if the speaker is not charging?

To fix the charging issue, you can try the following steps:

1. Wipe clean the tip of the charging cable.

2. Try using a different cable or wall charger (5V/3A output) to recharge the speaker.

3. Reset the speaker.

4. Recharge for at least half an hour to prevent over-discharge.

What does it mean when the light flashes red?

It means the battery is low.

How do I fix the no sound issue when Soundcore Motion Boom Plus is

paired with other PartyCast speakers?

Double press the PartyCast button on Soundcore Motion Boom Plus.

DOWNLOAD

SoundCore Motion Boom Plus Portable Speaker A3129 User Manual – [Download PDF]

SoundCore Motion Boom Plus Portable Speaker A3129 QSG – [Download PDF ]

A3129 Motion Boom Plus Declaration of Conformity – [Download PDF]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>