SoundCore Mega Party Speakers A3392 User Manual

SoundCore Mega Party Speakers A3392

USER MANUAL

What’s Included

At a Glance

Top Panel

1.

• Press and hold for 2 seconds to power on.
• Press to power off.

2.

• Press to enter Bluetooth pairing mode.
• Press and hold to enter True Wireless Stereo (TWS) mode while pairing.

3. (Source input button)

• Press repeatedly to select source input.

4.

• Press to skip to previous/next track.

5.

• Press to adjust volume.
• Press and hold to continuously adjust volume.

6. (Multi-function button)

• Press to play/pause music.
• Press to answer or end a call.
• Press and hold to reject an incoming call.
• Press to put the current call on hold and answer an incoming call.
• Press to transfer a call between speaker and mobile phone.
• Press and hold to switch between held call and active call.

7. (Light effect button)

• Press to turn on/off the light mode and switch the light modes.

8.

• Press to turn on/off the BassUP mode.
• Press and hold for 2 seconds to switch between indoor/outdoor sound mode.

Connectors

1. DC IN

• Connect to the provided power adaptor.

2. USB

• Connect to a USB storage device.
• Charge a USB device.

3. AUX

• Connect to an external audio device through a 3.5mm aux cable (not provided).

4. Guitar/Mic port

• Connect to a guitar/microphone (not provided).

5. Guitar/Mic volume knob

• Rotate to adjust guitar/microphone volume.

Charging

Charging your Soundcore Speaker

• Fully charge this speaker before the first use to prolong the lifespan of the built-in battery.

Checking Battery Level

Press any button to check the remaining battery level when it is powered on.

Charging your USB Devices

Use this speaker as an external battery to charge your USB devices.
Connect your USB device to the USB port on the back of this speaker.

Powering On/Off

Connect the provided power adaptor to the DC IN power jack of this speaker, and then to an AC mains outlet.

Press and hold for 2 seconds to power on. Press to power off.

• The built-in battery can be used as power supply of this speaker.
• Unplug the power adaptor from the AC mains outlet when not in use for an extended period of time.
• If this speaker is powered by built-in battery, it will power off automatically after 30 minutes of button inactivity or no audio playback.
• If this speaker is connected to AC power and the built-in battery is fully charged, it will power off automatically after 30 minutes of button inactivity or no audio playback.

Using your Soundcore

Bluetooth Mode

With this speaker, you can enjoy music through your Bluetooth-enabled devices.

• Dual Bluetooth Connection: This speaker can pair up to two mobile devices via Bluetooth.
  This speaker can only play music on one mobile device at the same time.

• To pair with another Bluetooth device, press to re-enter Bluetooth pairing mode.

• To play from another connected device, pause the currently active device first.

• Each time you power on your Soundcore speaker, it will automatically connect to your last connected device if available within the Bluetooth range. If not, press to enter Bluetooth pairing mode.

• You may also control music in the Soundcore App.

True Wireless Stereo (TWS) Mode

Two identical Soundcore speakers (Soundcore Mega) can pair with each other for stereo sound. The two speakers can music as the left channel and right channel.

Press and hold on both Soundcore Mega speakers simultaneously to enter TWS mode.

• With TWS connected, volume can be controlled at the same time for the two speakers.
• With TWS connected, both speakers can be paired with different smartphones.

USB/AUX Playback

Plug in a 3.5mm audio cable or insert a USB drive, then press to switch between AUX and USB mode.

• When using AUX mode, control audio playback via the connected device.

Button controls

Microphone/Guitar Connection

1. Connect your microphone/guitar (not provided) to the MIC/GUITAR port on the back of this speaker.
2. Rotate the microphone/guitar volume knob to adjust the microphone/guitar volume.

Beat-Driven Light Show

Press  to turn on/off or switch light modes.

Check all available light modes in the Soundcore App.

Soundcore App

Download the Soundcore App for enhanced product experience.

• Set up Bluetooth connection
• Update firmware
• Indicate battery status
• Switch among multiple light modes ( Default light mode is “Party”)
• Switch between indoor and outdoor sound modes
• Light DJ mode to support light and sound variation
• Enjoy party games
• Switch BassUP mode
• Remotely control the volume and play/pause

Specifications

Specifications are subject to change without notice

DOWNLOAD

SoundCore Mega Party Speakers A3392 User Manual – [Download PDF]

SoundCore Mega Party Speakers A3392 QSG – [Download PDF]

A3392 Soundcore Mega Declaration of Conformity – [Download PDF]

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>