SoundCore Trance Go Party Speakers A3396 User Manual
- June 13, 2024
- Soundcore
Table of Contents
SoundCore Trance Go Party Speakers A3396
USER MANUAL
Charging
Charging Your Speaker
Checking Battery Level
Charging Your USB Device
Charging Your USB Device through the USB Device
Power On / Off
This speaker will power off automatically after 30 minutes if no device is connected
Using Your SoundCore Trance Go
Bluetooth Mode
With this speaker, you can enjoy music through your Bluetooth-enabled devices.
- This Speaker can Pair with up to 2 mobile deviceBluetooth.
- To pair with another Bluetooth device, press the Bluetooth button to re-enter Bluetooth pairing mode.
- This speaker can only play music on one mobile device at a time.
- To play from another connected device, pause the device that’s currently active first.
TWS ( True Wireless Stereo) Mode
Two identical Soundcore speakers can pair with each other for stereo sound.
1. Connect either speaker with your Bluetooth-enabled device.
2. On both Soundcore speakers, press and hold the Bluetooth button for at
least 2 seconds to enter TWS pairing mode.
PartyCast Mode
Set up one Rave Neo as the primary speaker and connect it with more than 100+ secondary Rave Neo speakers to control audio and all the light modes.
- Soundcore speakers with PartyCast function can also be connected with this speaker.
1. Press and hold the PartyCast button for 2 seconds on the Soundcore Rave
Neo that’s currently connected to your device as the primary speaker.
2. Repeat Step 1 on the other Soundcore Rave Neo you want to connect and then
press the PartyCast button to make them secondary speakers in PartyCast
pairing.
- The secondary speakers will automatically connect with the primary speaker.
When PartyCast Mode Successfully Entered
- You can power off, adjust the volume, or switch light modes for all speakers by controlling the primary speaker only.
- You can power off or switch light modes for each secondary speaker individually.
- You can’t adjust the volume for each secondary speaker individually.
- Any secondary speaker can be switched to become the primary speaker by pressing the PartyCast button and connecting to your smartphone.
- Any primary speaker can be switched to become the secondary speaker by pressing the PartyCast button and searching for an available primary speaker.
- To exit the PartyCast mode, press and hold the PartyCast button on any speaker for 2 seconds.
AUX / USB Mode
- When using AUX mode, control audio playback via the connected device.
Button Controls
SoundCore App
Download the Soundcore app to enhance your experience.
- Set up Bluetooth connections
- Check product information
- Update firmware
- Indicates battery status
- Switch among multiple light modes
- Light DJ mode to support light and sound variation
- Enjoy party games
- Switch BassUp mode
- Remotely control the volume and play/pause
- Read user manual
- Set Auto-power off time
Specifications
Specifications are subject to change without notice.
| DC power input | 5 V == 2 A (USB Type-C) |
|---|---|
| Battery capacity | 4900 mAh / 7.4 V |
| USB output | 5 V == 2 A (USB Type-A) |
| Output power | 50 W |
| Charging time | Appr. 6 hours |
| Playtime (varies by volume level and music content) | Up to 24 hours |
| Waterproof level | IPX7 |
| Bluetooth version | V5.0 |
| Bluetooth range | 20 m / 66 ft |
| USB audio format | .mp3, .wma |
Support Videos
How to pair Rave Neo, Rave PartyCast, and Trance Go Speakers via PartyCast
DOWNLOAD
SoundCore Trance Go Party Speakers A3396 User Manual – [Download PDF]
SoundCore Trance Go Party Speakers A3396 QSG – [Download PDF]
A3396 Soundcore Trance Go Declaration of Conformity -[Download PDF]