ITC PH02-XBK Rotating Phone Holder Installation Guide
- June 13, 2024
- ITC
Table of Contents
INSTALLATION INSTRUCTIONS
PH02-XBK Rotating Phone Holder
Rotating Phone Holder
Part#: PH01-XBK or PH02-XBK
PARTS / TOOLS NEEDED:
Safety/Installation Considerations
- Disconnect power before installing, adding or changing any component.
- To avoid a hazard to children, account for all parts and destroy all packing materials.
- Electrical Specs:
Input voltage: 10-30V DC| Input Current: Wireless: 1A | USB-A: 1.9A | USB-C: 2.4A
Charging Capacity: Wireless Only: 10W | Wireless + USB-A: 10W + 12W | Wireless
-
USB-C: 10W + 18W
-
Positive (+) outputs require a fuse if the attached wire leads are not rated to handle the max current.
-
The charger has been designed to work with Qi compatible devices.
-
The charger has been designed to charge and operate within the receiving device’s thermal parameters.
Low or high temperatures might cause the receiving device to change their charging behavior to regulate its temperature and preserve battery life. Typical temperature ranges are 0ºC to 35ºC (32ºF to 95ºF). When exceeding these operating temperatures, the phone and/or the charging device may temporarily stop charging to protect from overheating. -
The wireless charging module has been designed to be optimized with no case installed. If a thick phone case is added to the distance between the charger surface and the phone it may cause the device to not charge or to temporarily shut down to protect from over-heating.
- Determine the installation location and mark the mounting holes.
Pre-drill the mounting holes and drill a 1⅜” hole for the wire access.
-
| Product Type | Wire Access Hole Size |
|---|---|
| Surface Mount | 1⅜” |
| Articulating Arm | ½” |
- Screw the holder in place using #6 pan head screws (not provided) making sure to follow the top orienta tion noted on the back of the part.
- Wire the phone holder using the wiring diagram.
- Surface Mount Version: Snap the holder into the mounting plate making sure to line up the TOP text on the mounting plate and phone holder. The phone holder can be rotated 90° so it can be viewed in portrait or landscape orientation.
3030 Corporate Grove Dr.
Hudsonville, MI 49426
Phone: 616.396.1355
itc-us.com
For warranty information please visit
www.itc-us.com/warranty-return-policy
DOC #: 710-00210 • Rev B • 08/23/23
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>